• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Anyone heard of DC SPORT lowering springs for 94-98's?

  • Thread starter Thread starter Wes8398
  • Start date Start date Jun 25, 2006

Wes8398

New Member
Jun 21, 2006
11
0
0
Jun 25, 2006
#1
  • Jun 25, 2006
  • #1
Someone's selling a set of DC SPORT lowering springs and it just got my attention because I thought DC only made import stuff. They're supposedly a 2" drop all around, and the guy selling them said that he didn't need c/c plates or any c/c adjustments when he put the springs on. Judging by the pic (see attachment), I find it very hard to believe, but is that possible? He also said that the stock shocks/struts were used with them, and they never bottomed out ... I have read much speculation that more then an Eibach ProKit's drop could possibly cause the stock struts/shocks to bottom out ... again, possible that this isn't true?
Basically, I'm just tryin to get some opinions before I consider making the purchase.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jun 25, 2006
#2
  • Jun 25, 2006
  • #2
Yes, i've heard of them and actually seen them on a '99 GT

The car was LOW AS HELL. I was amazed at how far the drop was.. But it looked good!
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 25, 2006
#3
  • Jun 25, 2006
  • #3
I see no pic but i love my low ass car with sportlines and no isolators but more than 2 inches is just insane and won't be good for the car
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
Jun 26, 2006
#4
  • Jun 26, 2006
  • #4
You mite as well get H&R Supersports they are a reputable company and are well known.
They will also give you the 2" drop you are looking for.
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Jun 26, 2006
#5
  • Jun 26, 2006
  • #5
You will need CC plates with that low of a drop, unless of course you don't mind buying new tires every 6 months or so.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Jun 26, 2006
#6
  • Jun 26, 2006
  • #6
Wes8398 said:
Someone's selling a set of DC SPORT lowering springs and it just got my attention because I thought DC only made import stuff. They're supposedly a 2" drop all around, and the guy selling them said that he didn't need c/c plates or any c/c adjustments when he put the springs on. Judging by the pic (see attachment), I find it very hard to believe, but is that possible? He also said that the stock shocks/struts were used with them, and they never bottomed out ... I have read much speculation that more then an Eibach ProKit's drop could possibly cause the stock struts/shocks to bottom out ... again, possible that this isn't true?
Basically, I'm just tryin to get some opinions before I consider making the purchase.
Click to expand...
I have the brooklyn bridge for sale
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 26, 2006
#7
  • Jun 26, 2006
  • #7
tomustang said:
I have the brooklyn bridge for sale
Click to expand...
Drinking again?
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Jun 26, 2006
#8
  • Jun 26, 2006
  • #8
HoustonGT said:
Drinking again?
Click to expand...
Nope, but for an obvious post like that it sounds like the guy wants to get hosed
 

Skidzz

Tinkerbell
Apr 11, 2005
328
1
19
Salt Lake City, UT
Jun 26, 2006
#9
  • Jun 26, 2006
  • #9
Yes you are going to need c/c plates with that. Just because the guy didn't have them on his car doesn't mean it's a good idea. I have a friend who is the same way. He has springs that lowered his car 2" and that's it. I keep telling him he need to get c/c plate and shocks/struts, but he keeps saying "no my car doesn't need them" as if his saturn ion is some modern handling marvel or something.
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
Jun 26, 2006
#10
  • Jun 26, 2006
  • #10
Skidzz said:
Yes you are going to need c/c plates with that. Just because the guy didn't have them on his car doesn't mean it's a good idea. I have a friend who is the same way. He has springs that lowered his car 2" and that's it. I keep telling him he need to get c/c plate and shocks/struts, but he keeps saying "no my car doesn't need them" as if his saturn ion is some modern handling marvel or something.
Click to expand...
He will learn one day when something happens to his car lol.
I highly subjest C/C plates for anything over a 1 1/2" drop
and you should put new struts and shocks on your car if you drop
your car period.
 

hognutz

New Member
Nov 12, 2002
1,940
0
0
albany, oregon
Jun 26, 2006
#11
  • Jun 26, 2006
  • #11
I would never buy srings unless I was aware of the spring rate.

I call bs on the guys car being alinged properly if it actually was down 2 inches. even if his was does not mean yours will be.

your shocks do not have as much to do with bottoming out as the actual spring rate. the shocks just dampen the rebound and compression of the the spring.

you can run stock shocks and struts with any springs you want they just will not last or perform the same as they were not desinged for the combo.

If you buy them and run stock shocks and struts I think the the car will ride like crap, need CC plates for correct alinment, but will proably look great with 2" drop.
 

Wes8398

New Member
Jun 21, 2006
11
0
0
Jun 27, 2006
#12
  • Jun 27, 2006
  • #12
tomustang said:
Nope, but for an obvious post like that it sounds like the guy wants to get hosed
Click to expand...
A post like what? I'm clearly not being gullable or looking to get "hosed" since I'm asking opinions and NOT giving this guy any credit yet ... If I believed everything he was telling me (ie that c/c plates wouldn't be needed), then I wouldn't have even started this thread, yanno? He does sound pretty sketchy, so I decided to go with a slightly used Pro Kit instead....it's on it's way

The 2" drop was a little too much for me anyway ... it just didn't look right in the picture (which apparently didn't work for many of you...sorry). The pics I've seen of the Pro Kit on SN95's looks like exactly what I want - or so I'm hoping at least. I dont' have the money to go with new shocks/struts right now, so I'm going to wait till they actually NEED to be replaced, then i'll get some KYB's I think. c/c plates aren't a necessity with the ProKit's 1.5" drop, right? I'm going to have an allignment done after I get the springs on anyway, so if there is some camber/caster issue then they'll take care of it anyway.

I really appreciate all the input ... great to have a place like this for a "noob" like myself.

EDIT: I attached the pic again ... just for the hell of it.
 

Attachments

  • DC Springs.webp
    52.2 KB · Views: 161

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 28, 2006
#13
  • Jun 28, 2006
  • #13
Damn, that drop actually looks pretty fuggin nice
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Jun 28, 2006
#14
  • Jun 28, 2006
  • #14
id get a real setup, like some HR's and some Bilsteins or Illuminas.

DC crap is just that. crap. its meant for cheap ghetto ebay ricers who want that mad tyte drop but cant afford it on their minimum wage, and dont give 2 ****s about actual suspension geometry because gran turismo taught them that no matter what, a lower center of gravity=better handling. what they fail to know is too low can hurt it more than stock.

if you do get those, price out some CC plates as well as some struts designed for such a drop.
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
Jun 28, 2006
#15
  • Jun 28, 2006
  • #15
Yep, I would much rather have the H&R springs on my car lol.
Springs is one thing I would never go cheap on.
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
229
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Suspension A not-so-low lowering spring
  • Justin87
  • Mar 7, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
32
Views
4K
Fox 5.0 Mustang Tech Mar 12, 2024
Justin87
Hello from California - Fox Body
  • gkomo
  • Aug 2, 2024
  • The Welcome Wagon
Replies
16
Views
1K
The Welcome Wagon Sep 25, 2024
SoulN
S
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?