AODE

I have a 1994 former V6 with an AODE transmission. The power plant is now a Boss Cleveland. I want to run the AODE with the stock computer. I run into the problem because the only sensors I have hooked up are the TPS, CTS, and the Tach wire hooked into the computer. I had to run an oil pressure switch to the fuel pump to keep that running because the computer did not sense the engine running. I also put in a thermo coupling to control the cooling fan. The transmission is still hooked into the computer and I am wondering what info the PCM needs to control the transmission shift from the engine. Thank you for any info provided.

I just ran it down the road and it shifted all the way to od with the only engine info hooked up (TPS and CTS). I have add fluid so it might be a little low, not sure how low may a quart, and I have to check tps adjustment.