are 42's too much?

leon_reynolds

Founding Member
Apr 24, 2002
91
0
6
I just installed 42# injectors with a matching pro-m 80mm maf calibrated for 8 psi. My car will barely start and wont get past 2000 rpm at wot. I had lots of feedback saying that 42's were the right size, but questioning it right now. Will my setup work if I get it tuned, or am I in for a heartbreaker :bang: ? My setup is posted below, but I also have strait exaust......no i/m here in alaska :nice: I also have twisted wedge heads on their way. Is there any hope for this setup?
 
When i put my 90mm MA in and 42lb inj. my car idled like crap. I had to back fuel pressure down to 25psi. Once i got to the tuner he burned a SCT chip to reconize the meter amd injectors and the car idled dead on 800 rpm.that was before he even started the tune. One more thing, I had platinum plugs in and the spark was getting blown out by 3000 rpm's. Rookie mistake on my part. We put in autolight 24's set at .035 at the tuner's and everthing was fine.
 
Buddy of mine just got his car tuned yesterday...he runs 42lbers, Edelbrock Performer intake, E cam, GT40P headers, 80mm maf, 76mm elbow coming from that and a 75mm CAI. The tune actually had to be richened up because he was running lean. I'm not sure how that helps but if you're running similar parts, you might be ok.
 
42's are fine BUT you will need to tune the car. I'd invest in a tuning device such as a pms or a tweecer. Your idle problems will be extremely easy to fix. 42's were the perfect choice with your heads and other mods comming. Buy it once, buy it right ;)