BAP Reading

[Guero]

After using the search engine and going thru 8 pages I didn't find my answer. Whats a good BAP number on our cars. I went to the shop today and he told me to log the BAP pressure. Mine started at 28.?? and went up to 30 and stayed their. I was just driving around the block a few times. He also said it could be my MAF since Im running rich.


This is to my problem were my computer pulls timing. It pulls as low 9.5 FYI

 

[Guero]

TTT

 

[chuck943]

BAP?
Are you talking about barometric pressure? I am just assuming this because it is the only thing I can think of that may have a reading of 28 or 30.
If this is what you are talking about then according to your reading you are between sea level(30) and 2000 ft. (28)

 

[m0l0]

Are you loggin a separate BAP sensor? i had this question a few weeks ago since i readed that our computers have integrated BAP sensor, with this in mind i put the BAP on the payloads but ive only got 17 ant stayed there all the time ( Of course i live 7000+ft maybe is this? ) and i have not logged since then, but does the tweecer can read the BAP sensor on the CBAZA ?


Guero :

I think that if you have the BE registered you can use the Real time Monitor on the tables, so maybe you can pinpoint where is you computer removing time?