Build Thread Best Of Mustang I I Tech (NEW CONTENT ADDED 10/24/2022!)

Adieu · Nov 14, 2015

BOLT THREAD REFERENCE!

since there has been plenty of talk... and no doing it... intake manifold 5/16-18 x 2.5 valve cover 1/4-20 x 1 Crank pulley 3/8-16 x 1 Plugging Smog Hole (thermactor plug) 5/8-11 speed sensor clamp 1/4-20 x 3/4 Tps sensor screws M4 x 0.7 pitch x 25mm length intake plaque 8-32x1/2" taper seat...

www.stangnet.com

Electric Choke Connection:
power source for electric choke? | Mustang Forums at StangNet

2.8 V6 Info:
A Link For Those Interested In Building The 2.8 | Mustang Forums at StangNet

Ghia-to-coupe Conversion:
https://www.stangnet.com/mustang-forums/threads/ghia-conversion-to-hardtop.750304/

Radio Removal: https://stangnet.com/mustang-forums/threads/1977-am-philco-radio-removal.907710/

Cluster LED conversion WITH VIDEO!

Electrical - LED Light Conversion Completed.

Hi All, Enzio here. I just retired a few months ago and now that the weather is nicer I'm going to finish up the '76 Cobra II. There are few minor things to take care of and one was part of the LED light conversion that I didn't have time to troubleshoot last fall before the winter set in. For...

stangnet.com

Sequential Tail Light Mod ?s

im looking for some info on the the sequential mods. Those who have done it how did you do it. And did it eliminate the wireing for the reverse lights? And what about the emergency flashers? I would like to have sequentials with the reverse lights in the stock location already half way though...

www.stangnet.com

Oil pan gasket change OR starter replacement in a 302 II

Here's a quick how-to on changing an oil pan gasket on a 302 without removing the engine. It's the same steps as changing a starter more or less, so it's basically 2 birds with 1 stone. First, raise the car to an appropriate height and support it. Remove the (-) battery cable from the battery...

stangnet.com

Dimensions

My car is at the body shop on a frame rack currently to see how bad it's bent and if thats contributing to vibration issues. They have no base measurements to input into the "laser machine". I have searched but probably not using correct terms. They have told me they cannot use the laser system...

www.stangnet.com

If you want to add more, just follow the same format. This will allow us to have a cleaner look to the forum with far fewer stickies (I know there's a lot more threads out there worthy of being added, I'm adding more as I find the time.)

IICrew · Aug 3, 2020

Here are some pdf's I've collected over the years. Most are from II.org or facebook. Alot will be covered in other posts. Some info may be outdated. I just wanted to make sure I didn't lose them and wanted another way for everyone to access them besides facebook.

IICrew · Aug 3, 2020

A few more

2Blue2 · Oct 9, 2021

When Matt stepped down this went too.
Can this go back to being a sticky?

RaggedGT · Oct 9, 2021

2Blue2 said:
When Matt stepped down this went too.
Can this go back to being a sticky?

You have that Powah my friend

2Blue2 · Oct 10, 2021

RaggedGT said:
You have that Powah my friend

Is this power in the mod drop down menu?
Because there is only approvals and reports in it.

RaggedGT · Oct 10, 2021

2Blue2 said:
Is this power in the mod drop down menu?
Because there is only approvals and reports in it.

I stickied it for ya

2Blue2 · Oct 11, 2021

Thanks Pal, I think it is some of the important info in this corner.

Might of learned something too...

Enzio · Oct 21, 2021

Thank you O Powerful Mod Dudes!

LILCBRA · Mar 18, 2022

Replace plastic visor pins with metal

https://www.stangnet.com/mustang-forums/threads/sun-visor-tips.923255/

Adieu · Mar 18, 2022

LILCBRA said:
Replace plastic visor pins with metal

https://www.stangnet.com/mustang-forums/threads/sun-visor-tips.923255/

updated thread title to reflect addition of new info

LILCBRA · Oct 10, 2022

Tach modification to work with V8 conversion by @extra_stout

https://www.stangnet.com/mustang-forums/threads/tachometer-conversion-from-6-to-8-cylinder-will-also-work-for-4-to-6-or-4-to-8-but-with-different-resistor-size.924607/#post-9367311

LILCBRA · Oct 24, 2022

Stiffer front springs:

Stiffer front springs writeup from the old .net site

Since this subject was recently brought up, here's an article from the old .net site about swapping/upgrading front springs. This is a copy and paste so as to not lose the info if the web.archive site lets it expire or goes down. That link is here. Posting so it can be added to the tech sticky...

www.stangnet.com

Adieu · Oct 24, 2022

https://www.stangnet.com/mustang-forums/threads/fitting-a-milodon-8-qt-oil-pan.924707/

LILCBRA · Oct 24, 2023

Not specifically II related, but here's a guide to help decide if you should change tires that you are questioning due to age.

When to Replace Tires and How to Buy New Tires | Via

Learn how to choose the best tires and save money on your purchase.

mwg.aaa.com

LILCBRA · May 20, 2026

Short writeup of Stumpy's subframe connector install:

LILCBRA said:
Woke up way too early this afternoon, since I couldn't get back to sleep I ran out to the garage - Stumpy's subframe connectors are installed. Here are a few pics of the process:

First order of business was removing the forward spring support bolts and breaking the spot welds for the retaining nuts. I used breaker bar and was able to snap them off, then used a grinder with a cut off wheel to grind the remaining welds down.

As I said previously, I worked on the passenger subframe to get the connector to fit, the driver side was beat in worse than the passenger side but I was able to get it straightened out well enough.

Here is the driver side positioned into place to drill the 3 holes to bolt the connector in. I actually drilled 6 holes per side, the inner and the outer, instead of attempting to drill straight through. Unfortunately that means I had to drop my exhaust again.

Once the holes are drilled and the bolts inserted, release whatever load you have on your jacks and tighten them to the Gutentite torque spec.

Build Thread Best Of Mustang I I Tech (NEW CONTENT ADDED 10/24/2022!)

Easy there, this ain't a dating site.

Mustang Master

Attachments

Mustang Master

Attachments

will be trying this sex one when I can find it

Been here over a DECADE and still no CT

will be trying this sex one when I can find it

Been here over a DECADE and still no CT

will be trying this sex one when I can find it

Dang it. I was hoping mine would get 3 more inches

I wish I didn't have all of these balls in the air

Easy there, this ain't a dating site.

I wish I didn't have all of these balls in the air

I wish I didn't have all of these balls in the air

Easy there, this ain't a dating site.

I wish I didn't have all of these balls in the air

I wish I didn't have all of these balls in the air

Similar threads

Privacy & Transparency

Privacy & Transparency