• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Biggest Tires that are not Drag Radials

  • Thread starter Thread starter OC Stang
  • Start date Start date Jul 29, 2004
O

OC Stang

New Member
Jul 21, 2003
83
0
0
Orange County, CA
Jul 29, 2004
#1
  • Jul 29, 2004
  • #1
Need some advice. I know that there are tons of threads about tires and rims, however I have seen nothing about what I am looking to find out.

I have some new 18X10 Deep Dish Chrome Bullitt rims and I need to see what kind of tire I can get that is not a drag radial. I see that Nitto has 295s that are not DR's but they are too tall. I will go to DRs if I have too, but would rather have a tire that lasts longer since they are so dang expensive and I do not plan on racing my car.

Any info would help. Size, Brand, where to buy, etc. Anything like this would be great. I am itching to get the rims on, but don't want to rush into the wrong tire since they will cost like a $1000.

Thanks!
 
C

cltgt

Founding Member
Apr 15, 2001
931
0
0
Geneva, Fl.
Jul 29, 2004
#2
  • Jul 29, 2004
  • #2
335/30/ 18 If they fit. if not probably 315's
 
M

mrcorpse

Founding Member
Jun 11, 2002
82
0
0
Gainesville, FL
Jul 29, 2004
#3
  • Jul 29, 2004
  • #3
Are they the 18x10 or the 18x10.5? If it's an 18x10.5, you can squeeze a 315 on there, either way you'll be fine with a 295.

I believe you'll want a 295 35 18, where the Kumho MX is probably your best value, although there are a good number of tires in that size, (check the tire rack). For the 315, you'll want a 315 30 18, which will run you big money, since your only real choice is the pirelli and the Michelin Pilot Sport (I'd go with the Michelin)

To save a lot of money, you could go with a 285 35 18, but if you're running the 10.5" rim, that might run too small. TireRack has the Sumitomo in that size though, which runs a downright affordable $177.

Good luck whichever way you go!
 

stallion98gt

New Member
May 12, 2003
1,802
0
0
Los Angeles, CA
Jul 29, 2004
#4
  • Jul 29, 2004
  • #4
I've seen Michelin pilot 335 on 18x10.5
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Jul 29, 2004
#5
  • Jul 29, 2004
  • #5
cltgt said:
DON'T SHIP FEDEX
Click to expand...
Off the subject, are you sure your neighbors didn't steal whatever you lost? FedEx has a nasty habit of dropping packages on doorsteps, ringing the bell, then running back to their truck.
Who signed for it? Always ship with a signature required.
 
C

cltgt

Founding Member
Apr 15, 2001
931
0
0
Geneva, Fl.
Jul 30, 2004
#6
  • Jul 30, 2004
  • #6
twogts4us said:
Off the subject, are you sure your neighbors didn't steal whatever you lost? FedEx has a nasty habit of dropping packages on doorsteps, ringing the bell, then running back to their truck.
Who signed for it? Always ship with a signature required.
Click to expand...

Actually, I shipped the item from Orlando, but it never left the hub. So I know someone stole it especially since you have to tell them what you are shipping. To make matters worse the agent didn't enter the insurance info in the computer, so they said there is nothing they can do about it, I got screwed
 

Marks5.0!

Founding Member
Jan 27, 2000
640
2
0
San Antonio, TX
Jul 30, 2004
#7
  • Jul 30, 2004
  • #7
ive seen 335/30/18 fit on a 03 cobra 10.5" rim, it had a little sidewall buldge but wasnt too much
 
O

OC Stang

New Member
Jul 21, 2003
83
0
0
Orange County, CA
Jul 30, 2004
#8
  • Jul 30, 2004
  • #8
Hey thanks guys. Good info.

My rims are only 10" not 10.5". So it looks like I will go with the 295/35/18 Kuhmo MX. Seems like the best deal. May move up to 315/30/18, but would have to find a different manufacturer.

I am thinking that since I need them mounted, I will just see what a couple local shops have in stock and make my decision.

Any more info is welcomed.

Thanks again!
 
You must log in or register to reply here.

Similar threads

P
Fox 17" Deep Dish Bullitts on Rear of Fox, 275/40/17?
  • pindude80
  • May 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
734
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 4, 2025
Noobz347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
First gear is too tall. Should I make it taller? Nitrous guys, help!
  • FastDriver
  • Dec 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 31, 2023
AeroCoupe
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?