• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

black magic e-fan ques

  • Thread starter Thread starter 310stanger
  • Start date Start date Jan 16, 2009
3

310stanger

New Member
Aug 15, 2006
170
1
0
Jan 16, 2009
#1
  • Jan 16, 2009
  • #1
got a question pertaining to this fan coming on. I installed this maybe 2 yrs ago, set it when it was supposed to come on. Havent driven the car for a pretty long time except for the past couple of days. Opened up the radiator cap today to check that my coolant level was still good, it had to get topped off. I topped it off and took it for a ride and noticed the temp gauge start to go to the very top of the normal range. The fan was set to kick on more towards the middle of the gauge. I open the hood and notice that the reservoir for the coolant is elevated from where it was before so it tells me the coolant definitely got pretty hot. Has any ever had their black magic fan just stop coming on? Its really cold out today so I cant stand working on the car outside, but all i could think of was the power wire for the fan that goes to the negative battery terminal is maybe corroded a lil? Lastly, think its airpockets from the coolant getting low that suddenly made the car get that hot? It didnt overheat but it was headed that way.


Ps. I know a lot of you hate this fan, but up until this, I never did have a problem with it. With a ron davis radiator it always seemed to do the job good enough.
 

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,109
2,726
224
Vass, NC
Jan 16, 2009
#2
  • Jan 16, 2009
  • #2
I burned up two of those fans and will never install another. I was tired of my engine bay catching fire...

Anyway, check all of your electrical connections and ensure they are all hooked to the correct terminals on the fan relay (On top of the fan). Then make sure they are not corroded. Ensure that the temp gauge is inserted into the radiator. It's best if it goes in between a couple of spread fins in the radiator instead of pressed against the outside of the radiator. Then once the radiator is warmed up, play with the toggle switch on the top and check to see if the fan is working. If you've done all this and it still doesn't work, yank it and get a spal or a fan out of a newer ford.

Chris
 
3

310stanger

New Member
Aug 15, 2006
170
1
0
Jan 16, 2009
#3
  • Jan 16, 2009
  • #3
FastDriver said:
I burned up two of those fans and will never install another. I was tired of my engine bay catching fire...

Anyway, check all of your electrical connections and ensure they are all hooked to the correct terminals on the fan relay (On top of the fan). Then make sure they are not corroded. Ensure that the temp gauge is inserted into the radiator. It's best if it goes in between a couple of spread fins in the radiator instead of pressed against the outside of the radiator. Then once the radiator is warmed up, play with the toggle switch on the top and check to see if the fan is working. If you've done all this and it still doesn't work, yank it and get a spal or a fan out of a newer ford.

Chris
Click to expand...
thanks man. god that would piss me off if the fan motor is burnt out. The unit is not that old in age, but in use its fairly new. Im hoping theres a rust/connection problem or something.
 

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,109
2,726
224
Vass, NC
Jan 16, 2009
#4
  • Jan 16, 2009
  • #4
Oh, I forgot... I never installed the manual on/off toggle switch in my car. If you have one, try disconnecting it. Maybe it's shorted?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 16, 2009
#5
  • Jan 16, 2009
  • #5
Using fused jumper leads, bench-test the fan. This will tell you if the fan itself is the issue, or if it's the controller or a wiring issue.
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 16, 2009
#6
  • Jan 16, 2009
  • #6
I had one of those fans, the connections would come loose even when I tried to solder them on; and it melted two fuses at two separate times I'm glad I saw it both times before it caught on fire. One time I busted the capilary tube and that made the fan not work, I think I bought the tube/controller replacement at Autozone.
 

89hatchlx

New Member
Oct 9, 2008
58
0
0
Dirty South Jerzzzz
Jan 18, 2009
#7
  • Jan 18, 2009
  • #7
I'm sure you probably didn't but its worth a shot. Did you change your thermostat? Could it be in backwards? I had a buddy do that one time and it turned into a much bigger problem down the road. If all is well with that then the temp rising that fast is just a small air bubble trying to work itself out. . The Blackmagic fan, I have been running on in my car for over a year now. It was in the car when i got it, its seen better days but have never really had any problems with it. I do recall that it did burn up the connector on the power wire one time but that was my fault for using it again cause it was a rather lose fit. My dial is off a ways and i usually let the car warm up and adjust the fan knob from there see where it comes on then Adjust it a little to come on a little farther. Good luck anyways hope you get it worked out. What T stat are your running 190, 195, 180?
 
You must log in or register to reply here.

Similar threads

L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
141
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
713
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
S
Progress Thread severe97's Project Thread!
  • severe97
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
47
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 1, 2025
severe97
S
Engine Engine Bay crazy hot!
  • R82148V
  • Aug 28, 2023
  • Fox 5.0 Mustang Tech
Replies
15
Views
6K
Fox 5.0 Mustang Tech Aug 30, 2023
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?