Hello Everyone im new to the stangnet family and i have a question about what cam to use for my application. I have a 95 bmw e36 with a 331 stroker in it, before i ask my questions i want to list all the parts i have used on it. i know someone these parts have no relations to my question but i just want t o put it out there what i used in case anyone is wondering.
Stock block Scat 1-94055BE Rotating assembly
Current CAM is Comp Cam xe282HR-12
Edelbrock 8840 Victor water pump
Edelbrock 7123 Performer RPM Intake manifold upper and lower
AFR 1422 185CC Heads 58CC Chambers
BBK Shorty headers
Comp Cam 19043-16 gold Rollers
75MM BBK Throttle Body (Whistles so bad)
32 IBS Injectors
MSD 8456 Distributor
Powering it all up is a microsquirt (Shout out @a91what for all the tuning he has done)
Taking the abuse is a t5 tranny
I have built this car for street fun and to be able to daily drive it but drifting it is my main goal. I live in Central California 209 near silicon valley. CHP and City cops are really serious around here with modded cars so i dont want to lose my car and get it towed. My Main Issue is that the cam i have in right now is not smooth at all basically shakes the whole car so what im looking for is a smooth idle cam that can still have my power. When i picked out this cam i wasn't thinking too much of it nor did i do my research on it all i seen was that it makes power so i just went with it. So please give me suggestions on which cam i can run that is smooth on the idle but i will still make good power up my setup. AND also if anyone can recommend any good throttle body that doesn't whistle my current BBK one is horrible, hows the SR performance ones from american muscle? I can post pictures if anyone is interested in seeing the setup. Thank you guys hopefully i made everything clear and didn't write too much thanks
Stock block Scat 1-94055BE Rotating assembly
Current CAM is Comp Cam xe282HR-12
Edelbrock 8840 Victor water pump
Edelbrock 7123 Performer RPM Intake manifold upper and lower
AFR 1422 185CC Heads 58CC Chambers
BBK Shorty headers
Comp Cam 19043-16 gold Rollers
75MM BBK Throttle Body (Whistles so bad)
32 IBS Injectors
MSD 8456 Distributor
Powering it all up is a microsquirt (Shout out @a91what for all the tuning he has done)
Taking the abuse is a t5 tranny
I have built this car for street fun and to be able to daily drive it but drifting it is my main goal. I live in Central California 209 near silicon valley. CHP and City cops are really serious around here with modded cars so i dont want to lose my car and get it towed. My Main Issue is that the cam i have in right now is not smooth at all basically shakes the whole car so what im looking for is a smooth idle cam that can still have my power. When i picked out this cam i wasn't thinking too much of it nor did i do my research on it all i seen was that it makes power so i just went with it. So please give me suggestions on which cam i can run that is smooth on the idle but i will still make good power up my setup. AND also if anyone can recommend any good throttle body that doesn't whistle my current BBK one is horrible, hows the SR performance ones from american muscle? I can post pictures if anyone is interested in seeing the setup. Thank you guys hopefully i made everything clear and didn't write too much thanks