Brakes

F

fordkid

New Member

May 28, 2007

69

0

0

Aug 11, 2008

#1

• Aug 11, 2008

• #1

Hello- My brothers 2001 Bullitt is making noise from the brakes, it's a real bad clunking sound, so I took a look at it and with the tire off I can move the caliper forward and rearward with ease, it hits both the front side of the braket, is this because the pads are warn down too much(witch they do need replacing) or is there a problem with the caliper it self, or a third choice is there any parts missing, I.E is there anything that should be there to keep the caliper from moving forward and rearward.


Thanks
Ford Kid

 

281CI96Coupe

Member

Oct 30, 2006

233

0

16

Aug 11, 2008

#2

• Aug 11, 2008

• #2

Get it fixed a.s.a.p, I almost lost it 3yrs ago just because of an issue like that, when I was naive to cars, the mechanic that worked on my brakes didn't use the proper hardware almost resulting in me almost loosing it.

 

F

fordkid

New Member

May 28, 2007

69

0

0

Aug 11, 2008

#3

• Aug 11, 2008

• #3

Yea the car isn't being driven at this time untill it's fixed. I am just not sure if I need to do a regular brake job or if there are parts missing. I have done brake jobs before just not on the newer mustangs.


Ford Kid

 

H

hskrs10

Member

Dec 21, 2004

35

1

6

Nebraska

Aug 11, 2008

#4

• Aug 11, 2008

• #4

Make sure all the bolts are tighten, even with bad pad you shouldnt be able to move the caliper. Now i know if you have bad pads and your ebrake is set, your car can still roll.

 

larrendeuce

Member

Sep 13, 2003

649

1

19

Southern NJ

Aug 11, 2008

#5

• Aug 11, 2008

• #5

Don't forget the retaining pin. Its held in place by an e clip.