Cams are done, new dyno #

lvmustanggt · Aug 25, 2006

After all the ***** I couldnot get the valve springs change. I towed my car to SLIVER STATE MOTORSPORT to have my cams install. Cost me 160$ to tow my car and $1200 for cams and valve springs install. For all of you don't know me I now have Comp Cam xe270ah-13 and Comp cam Beehive valve springs. I got my car tuesday and today I took it back to the same shop to have dyno tune.

They just start SCT so they didn't have any file for my SCT X2 SF so he just ran on dyno and tune it with the tune that I had on my SCT out the box.

After he played with my SCT and 5 dyno pull I got 291.12rwhp and 301.87 torque. I am happy with the number as I have only few bolt on's. I was hopeing for 300rwhp but didn't happen. I will try to make video this sunday so you guys can hear my car lomp lomp

Going to track tomorrow, let's see if I can drive my car to low 13sec. I don't think I will do good tomorrow cause I have no tread left on my nitto 555r.

Thanks for all the guys and girls who try to help me when I was in deep trouble.

291.12RWHP 301.87 Torque

lvmustanggt · Aug 25, 2006

Clean engine

01Steeda · Aug 25, 2006

FINALLY!!!

congrats.. enjoy that power

Warrior 102 · Aug 25, 2006

Congrats.... now make a video....

csledd · Aug 25, 2006

very nice!! get some LT's!!

nwapache · Aug 25, 2006

great numbers!

Dope 97GT · Aug 25, 2006

nice numbers and some LT's may be able to put you over 300

and update your sig with the numbers but how did you lose torque

BaconBits · Aug 25, 2006

$1200 for a cam/spring install? HOLY CRAP!!!!

lvmustanggt · Aug 25, 2006

Dope 97GT said:
nice numbers and some LT's may be able to put you over 300

and update your sig with the numbers but how did you lose torque

on stangsource some one said " with bigger cams lose torque for hp"
I lose 6 torque for 25rwhp , I think sound alone or a cams worth 6 torque losee

My engine rocks way too much , should I go higher rpm ? stock rpm was 720rpm so I bump up to 760 but still lot's of engine movement so I was thinking maby I should go 820rpm. What you guys think?

lvmustanggt · Aug 25, 2006

csledd said:
very nice!! get some LT's!!

hey csledd what is your engine rpm set to ?

Pennywise2 · Aug 25, 2006

Congrats I'm happy to see everything worked out with your
cams!
Nice numbers and good job..

BlackenedSVT · Aug 25, 2006

ACcording to your current sig (that says: 265.70 RWHP 307.95 TORQUE, 13.5 1/4 with 1.8 60' ) and your new dyno numbers. U picked up about 26rwhp but lost 6 lbs torque?

Built98GT · Aug 25, 2006

SteedaGTJ22 said:
ACcording to your current sig (that says: 265.70 RWHP 307.95 TORQUE, 13.5 1/4 with 1.8 60' ) and your new dyno numbers. U picked up about 26rwhp but lost 6 lbs torque?

I am also confused.

lvmustanggt · Aug 25, 2006

SteedaGTJ22 said:
ACcording to your current sig (that says: 265.70 RWHP 307.95 TORQUE, 13.5 1/4 with 1.8 60' ) and your new dyno numbers. U picked up about 26rwhp but lost 6 lbs torque?

sig is old numbers. I just got cams and dyno done

BlackenedSVT · Aug 25, 2006

lvmustanggt said:
sig is old numbers. I just got cams and dyno done

Sooo what are the new dyno numbers then? Cause the dyno numbers u posted still show a -6 torque

04gtdrop · Aug 25, 2006

lvmustanggt said:
Clean engine

1st congrats on getting your cams done!

2nd do you lose any MPG when you put in cams?

3rd what did you use to clean your engine? and how long did that take you?

lvmustanggt · Aug 25, 2006

SteedaGTJ22 said:
Sooo what are the new dyno numbers then? Cause the dyno numbers u posted still show a -6 torque

With my cams I lose 6 torque but I got 25rwhp.

Just for you
Old numbers 265 rwhp 307 torque

New numbers after cams install
291rwhp 301 torque

Got it

lvmustanggt · Aug 25, 2006

04gtdrop said:
1st congrats on getting your cams done!

2nd do you lose any MPG when you put in cams?

3rd what did you use to clean your engine? and how long did that take you?

1st thank you
2nd don't know yet
3rd I bought engine degreaser from autozone. Just clean your engine and spray it that's it. Took me maby 10 minuts

04gtdrop · Aug 25, 2006

cool!

and the degreaser and water wont hurt your motor or electrical wires?

Red2000GT · Aug 25, 2006

lvmustanggt said:
on stangsource some one said " with bigger cams lose torque for hp"
I lose 6 torque for 25rwhp , I think sound alone or a cams worth 6 torque losee

My engine rocks way too much , should I go higher rpm ? stock rpm was 720rpm so I bump up to 760 but still lot's of engine movement so I was thinking maby I should go 820rpm. What you guys think?

My idle is set to 750 with the same cams,no problem. It'll always run rough cause of the duration of the cams,should smooth out at 1000 or higher.

Cams are done, new dyno #

New Member

New Member

New Member

New Member

Official Ovary Punching Member

New Member

New Member

New Member

New Member

New Member

Banned

Active Member

New Member

New Member

Active Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency