• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

Can a simple bolt on pulley replacement hose my super bearings?

  • Thread starter Thread starter OregonMustang
  • Start date Start date May 17, 2009

OregonMustang

New Member
May 18, 2004
260
0
0
Newberg,OR
May 17, 2009
#1
  • May 17, 2009
  • #1
I had my car taken into a local Ford dealer to replace the factory smooth pulleys. The car has been modified and as a result the paint was the first to go on the factory pulleys. So they started to rust...and well my sounded like a wagon.

I ordered a full set of billet flow pulleys to go with my current red 3.1 upper and 6lb lower. I took it to Ford thinking "oh hour and half no biggie...just simple bolt on replacement" How wrong I was.

After 4 days I got my car back. The noise at idol now gone...I was happy that I finally got my car back. During the cars stay they "lost my original pulleys, broke a belt and went shopping for another 92mm pulley to replace the one they lost".

I took possession and the car sounded ok....I took it out and well..it started getting worse....I could hear a metallic sound coming from the engine increasing with RPM's. At idol its nearly inaudible.

So I did not hear it that much coming home Thursday. Friday I wanted to take it into the deal again but I was advised not too... I need to get this car in somewhere can checked out A.S.A.P.

I wondering if they could have F'ed my SuperBearings or something worse...I have no idea why it took them 4 days to do the job.

UTube video of the noise!

http://www.youtube.com/watch?v=U9F7qPUAgY0

Eric
 

OregonMustang

New Member
May 18, 2004
260
0
0
Newberg,OR
May 18, 2009
#2
  • May 18, 2009
  • #2
Its the new belt....*head slap*
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
May 18, 2009
#3
  • May 18, 2009
  • #3
I'd bring it back in and have them straighten it out....and I'd do it sooner than later. If they're responsible for damaging your nose drive when removing the old pulley, then they should be damn well made to replace/repair it. My guess is that they let some kid work on it that didn't know what he was doing and he buggered it. The dealership has cluster**** written all over it, but in any case, you shouldn't be the one out the money. Four days to do a pulley swap is insane!!!!

*edit*

If it is in fact the belt, a trick to quieting them down is to run a bar of soap along the edges of the belt while its running. But if its slipping as bad as you say it was in your other thread, I might be more inclined to think the belt isn't the right length?

Did you say it was a Gates belt? They’re known for being a little noisier than standard replacement belts, since they use a solid, rather than slotted belt surface….but nothing like you’re describing?
 

OregonMustang

New Member
May 18, 2004
260
0
0
Newberg,OR
May 18, 2009
#4
  • May 18, 2009
  • #4
soap...

I will try that...the tech guy said that sometimes when they sit on shelves for long periods of time they can get crap in the ribs. Its the rib side...he sprayed some crap on the smooth side still noisy....rib side ...gold.

alignment of the pulleys perhaps? I read they can stick if the ribs are off.
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
522
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Engine Trying to remove crankshaft pulley bolts
  • 91GTstroked
  • Sep 7, 2022
  • Fox 5.0 Mustang Tech
Replies
14
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2022
91GTstroked
M
Rear end sounds like marbles in a tin can.
  • MacMAgoo
  • Oct 30, 2022
  • SN95 4.6L Mustang Tech
Replies
2
Views
1K
SN95 4.6L Mustang Tech Nov 18, 2022
TIGGER
C
Progress Thread 2004 Comp Orange GT
  • ctandc
  • Jun 26, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
56
Views
5K
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
ctandc
C
2000 Ford Mustang Gt 4.6
  • Misti
  • Apr 12, 2021
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
20
Views
4K
1996 - 2004 SN95 Mustang -General/Talk- May 22, 2021
stormsedge
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?