• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

CFI to Carb

  • Thread starter Thread starter gt350son
  • Start date Start date Jul 3, 2009
G

gt350son

New Member
Dec 1, 2008
16
0
0
Jul 3, 2009
#1
  • Jul 3, 2009
  • #1
I've been looking into converting my car to a carb setup. I've been looking at
Edelbrock 7121 - Edelbrock Performer RPM Intake Manifolds – SummitRacing.com and Holley 0-80670 - Holley Street Avenger Carburetors – SummitRacing.com to go with it. But I've heard that I may need to change my dizzy and possibly get either a new cable for aod or just a new bracket for the throttle.

If anyone could help me out that would be great.

I have removed the frame fuel pump. and put a efi pump in the tank to make room for the dual exhaust. But i do have the original mechanical pump to put in the tank.
 

Jacob_Royer

Member
Nov 24, 2007
142
1
19
Jul 3, 2009
#2
  • Jul 3, 2009
  • #2
Search ebay for 302 HEI there are some nice setups that use GM module/coil/cap much easier/simpler/better than the ford ignitions of the time and these drop right in!
 
G

gt350son

New Member
Dec 1, 2008
16
0
0
Jul 3, 2009
#3
  • Jul 3, 2009
  • #3
Jacob_Royer said:
Search ebay for 302 HEI there are some nice setups that use GM module/coil/cap much easier/simpler/better than the ford ignitions of the time and these drop right in!
Click to expand...

so this is basically all i need for the dizzy
http://cgi.ebay.com/ebaymotors/RED-FORD-LINCOLN-MERC-289-302-5-0-5-0L-HEI-DISTRIBUTOR_W0QQcmdZViewItemQQ_trkparmsZ65Q3a15Q7c66Q3a2Q7c39Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a98ea0eeeQQitemZ320393055982QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
 

Jacob_Royer

Member
Nov 24, 2007
142
1
19
Jul 4, 2009
#4
  • Jul 4, 2009
  • #4
Thats the one!
 
G

gt350son

New Member
Dec 1, 2008
16
0
0
Jul 4, 2009
#5
  • Jul 4, 2009
  • #5
Sweet thanks. Now I just need to know if i need any special bracket for the holley carb to work correctly with the aod or if i just need to get the lokar aod kickdown kit.
 

white 89 GT

Member
Apr 3, 2003
281
0
17
Tacoma
Jul 4, 2009
#6
  • Jul 4, 2009
  • #6
I use the lokar cable on mine for the AOD
 
G

gt350son

New Member
Dec 1, 2008
16
0
0
Jul 4, 2009
#7
  • Jul 4, 2009
  • #7
is that all you use? you didn't need any special kickdown bracket or extension?
 
G

gt350son

New Member
Dec 1, 2008
16
0
0
Jul 4, 2009
#8
  • Jul 4, 2009
  • #8
I've been kinda researching this for a while, and i think i found everything i need to convert a 302 from cfi to carb.

intake-
Edelbrock 2121 - Edelbrock Performer Intake Manifolds – SummitRacing.com
Summit SUM-G1579HS - Summit® Stainless Steel Intake Manifold Bolt Kits – SummitRacing.com

carb-
Holley 0-80453 - Holley Model 4160 Adjustable Float Carburetors – SummitRacing.com
Summit SUM-G3000 - Summit® Chrome Air Cleaners – SummitRacing.com

gaskets-
Edelbrock 7220 - Edelbrock Intake Manifold Gaskets – SummitRacing.com
Fel-Pro Q35440 - Fel-Pro Water Neck Gaskets – SummitRacing.com
Holley 20-124 - Holley Carburetor Installation Kits – SummitRacing.com

Kick down Cable-
Lokar KD2AODHT - Lokar Stainless Steel Hi-Tech Kickdown Kits – SummitRacing.com

Distributor-
http://cgi.ebay.com/ebaymotors/289-302-5-0-Small-Block-FORD-50K-HEI-DISTRIBUTOR-PC6002_W0QQcmdZViewItemQQ_trkparmsZ65Q3a15Q7c66Q3a2Q7c39Q3a1Q7c293Q3a2Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem5881ce0e0fQQitemZ380134886927QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

If anyone has any suggestions or concerns about this setup just let me know it would be very helpful. Thank you.
 

FORDRACING19

Founding Member
Aug 13, 2000
371
0
0
Denton,TX
Jul 5, 2009
#9
  • Jul 5, 2009
  • #9
Do it.
 

lincoln+ford

Member
Jul 4, 2009
195
0
16
Jul 5, 2009
#10
  • Jul 5, 2009
  • #10
what about for throttle cable?just go buy a factory carb cable from autozone?
 
You must log in or register to reply here.

Similar threads

9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
596
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
998
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?