CFI to Carb

[gt350son]

I've been looking into converting my car to a carb setup. I've been looking at
Edelbrock 7121 - Edelbrock Performer RPM Intake Manifolds – SummitRacing.com and Holley 0-80670 - Holley Street Avenger Carburetors – SummitRacing.com to go with it. But I've heard that I may need to change my dizzy and possibly get either a new cable for aod or just a new bracket for the throttle.

If anyone could help me out that would be great.

I have removed the frame fuel pump. and put a efi pump in the tank to make room for the dual exhaust. But i do have the original mechanical pump to put in the tank.

 

[Jacob_Royer]

Search ebay for 302 HEI there are some nice setups that use GM module/coil/cap much easier/simpler/better than the ford ignitions of the time and these drop right in!

 

[gt350son]

Search ebay for 302 HEI there are some nice setups that use GM module/coil/cap much easier/simpler/better than the ford ignitions of the time and these drop right in!

so this is basically all i need for the dizzy
http://cgi.ebay.com/ebaymotors/RED-FORD-LINCOLN-MERC-289-302-5-0-5-0L-HEI-DISTRIBUTOR_W0QQcmdZViewItemQQ_trkparmsZ65Q3a15Q7c66Q3a2Q7c39Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a98ea0eeeQQitemZ320393055982QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Jacob_Royer]

Thats the one!

 

[gt350son]

Sweet thanks. Now I just need to know if i need any special bracket for the holley carb to work correctly with the aod or if i just need to get the lokar aod kickdown kit.

 

[white 89 GT]

I use the lokar cable on mine for the AOD

 

[gt350son]

is that all you use? you didn't need any special kickdown bracket or extension?

 

[gt350son]

I've been kinda researching this for a while, and i think i found everything i need to convert a 302 from cfi to carb.

intake-
Edelbrock 2121 - Edelbrock Performer Intake Manifolds – SummitRacing.com
Summit SUM-G1579HS - Summit® Stainless Steel Intake Manifold Bolt Kits – SummitRacing.com

carb-
Holley 0-80453 - Holley Model 4160 Adjustable Float Carburetors – SummitRacing.com
Summit SUM-G3000 - Summit® Chrome Air Cleaners – SummitRacing.com

gaskets-
Edelbrock 7220 - Edelbrock Intake Manifold Gaskets – SummitRacing.com
Fel-Pro Q35440 - Fel-Pro Water Neck Gaskets – SummitRacing.com
Holley 20-124 - Holley Carburetor Installation Kits – SummitRacing.com

Kick down Cable-
Lokar KD2AODHT - Lokar Stainless Steel Hi-Tech Kickdown Kits – SummitRacing.com

Distributor-
http://cgi.ebay.com/ebaymotors/289-302-5-0-Small-Block-FORD-50K-HEI-DISTRIBUTOR-PC6002_W0QQcmdZViewItemQQ_trkparmsZ65Q3a15Q7c66Q3a2Q7c39Q3a1Q7c293Q3a2Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem5881ce0e0fQQitemZ380134886927QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

If anyone has any suggestions or concerns about this setup just let me know it would be very helpful. Thank you.

 

[FORDRACING19]

Do it.

 

[lincoln+ford]

what about for throttle cable?just go buy a factory carb cable from autozone?