Ed Curtis Cam is here!!!

Killercanary · May 25, 2004

Check his site, but I think its $325.

http://www.flowtechinduction.com

302efi · May 25, 2004

Killercanary said:
Check his site, but I think its $325.

http://www.flowtechinduction.com

$325?????!!!!!!

Sleepy McNastee · May 25, 2004

302efi said:
$325?????!!!!!!

With a 12.3 at 3600 pounds I dont think the extra $100 is too much to worry about.

zenboy99 · May 25, 2004

Plus Ed curtis will give you more then $300 just in advice. I don't know why anyone wouldn't go with a custom cam from him.

The Hitman · May 25, 2004

KillerCanary. You make a good point.. I didn't see it that way.

Back to the subject of Tune at hand.. Do you think JMS could burn me a chip that would make this thing work?

VibrantRedGT · May 25, 2004

Since I've copied the specs posted last night I do take Paypal if you want them.

The Hitman · May 25, 2004

Your funny Vib...

94GTLaserRC · May 25, 2004

302efi said:
Why is everybody telling him not to post the specs if he wants to !!???

It's his cam, he paid for it with his money. I mean damn, if Ed didnt want people knowing the specs on cams he grinds, then why suppy the buyer with them ??

I think this "do tell" **** is total junk. I mean the cam be got CUSTOM made for his combo, should only work well with his combo, so whats the big secret ???

<marquee>W..........E...........R.............D!!!</marquee>
DAMN, I missed it!
I wanna know the specs...
PM ME!
RC

Imyourzero · May 26, 2004

The Hitman said:
Back to the subject of Tune at hand.. Do you think JMS could burn me a chip that would make this thing work?

It's really just a simple matter of raising the idle enough to where the car will not die when a cam with such a low LSA is installed. I'm sure you could tell JMS to raise your idle to 800-900 and the car would be drivable on the street.

But I second the TwEECer idea. It will save you money in the long run--one example is that if you got a TwEECer you wouldn't have to buy a new MAF...you can make your MAF that is currently calibrated for 19# injectors work with any other size of injector. So you could just keep your MAF, stick some 24 pounders in, and use the TwEECer to make your old MAF work with the new injectors. Plus, if you ever add mods later, you can make adjustments for them via the TwEECer instead of having to get your chip reburned by JMS.

Stangfreak95 · May 26, 2004

94GTLaserRC said:
<marquee>W..........E...........R.............D!!!</marquee>

View attachment 525252

The Hitman · May 26, 2004

Imyourzero said:
one example is that if you got a TwEECer you wouldn't have to buy a new MAF...you can make your MAF that is currently calibrated for 19# injectors work with any other size of injector.

You can also do this with the Pro-M Maf recalibrator that is way cheaper. Or send it off and have it recalibrated for 100 bling.

Imyourzero · May 26, 2004

The Hitman said:
You can also do this with the Pro-M Maf recalibrator that is way cheaper. Or send it off and have it recalibrated for 100 bling.

Yep, but a TwEECer has endless benefits. It'll save you money in the long run if you want to make the effort to learn how to use it.

By the time you'd pay JMS for a chip and buy a new MAF for your injectors, you could have bought a TwEECer and could tune your car for as long as you own it without having to pay anyone else a dime.

The Hitman · May 26, 2004

Imyourzero said:
Yep, but a TwEECer has endless benefits. It'll save you money in the long run if you want to make the effort to learn how to use it.

By the time you'd pay JMS for a chip and buy a new MAF for your injectors, you could have bought a TwEECer and could tune your car for as long as you own it without having to pay anyone else a dime.

Yes a TwEECer is the best answer.. I just don't feel as if I'll have the time with all the ASE and GM Cert Tests I'm studying for to learn how to efficiantly use it.. plus I really just want something that I can set and forget for now..

I don't plan to mod the car much if at all after all this is done.. I plan to maybe make it look nicer.. so yes it would be good for this.. but I fail to see longterm benifits as this point. I'm too pennyless to do much more after this.. maybe down the road if I get a promotion.. or a raise.. Right now I just want the car to run and to be bad.. and put a scary hurtin on some people who think they are the baddest thing to roll out on four 14 inch wheels.. that was a joke.

But if a TwEECer is the only way then I guess it's 2005 until I can get all this stuff bought..

CivicEater · May 26, 2004

Man I dont know what all the fuss is about these holy FTI cams, My cam will outrun any thing Ed can make and I will give my specs to anyone who wants them for just 1 dollar

GTJake · May 26, 2004

CivicEater said:
My cam will outrun any thing Ed can make and I will give my specs to anyone who wants them for just 1 dollar

.....Behold the mighty TFS Stage One.....

Kornnut · May 26, 2004

The Hitman said:
Right now I just want the car to run and to be bad.. and put a scary hurtin on some people who think they are the baddest thing to roll out on four 14 inch wheels.. that was a joke.

I have 17's thank you very much . Car is going to be really nice when you get it all together man.

Imyourzero · May 27, 2004

The Hitman said:
I really just want something that I can set and forget for now..

Well then I got 1 word for ya. Ronco. "Set it...and FORGET IT!"

The Hitman said:
I don't plan to mod the car much if at all after all this is done..

Ha, where have I heard that before? This time next year you'll be shopping for a Kenne Bell or a Novi 2000. And sending love notes to Ed Curtis because you're so happy with the cam.

The Hitman said:
Right now I just want the car to run and to be bad.. and put a scary hurtin on some people who think they are the baddest thing to roll out on four 14 inch wheels..

Sorry, I didn't catch that?? Tim, ZX2, what?

95snoozer · May 27, 2004

CivicEater said:
Man I dont know what all the fuss is about these holy FTI cams, My cam will outrun any thing Ed can make and I will give my specs to anyone who wants them for just 1 dollar

your combo should run well once you get everything worked out

what elevation are you at.... maybe you should go to modular depot and correct your times for SAE

Stangfreak95 · May 27, 2004

CivicEater said:
Man I dont know what all the fuss is about these holy FTI cams, My cam will outrun any thing Ed can make

Good one

onebad95 · May 27, 2004

CivicEater said:
Man I dont know what all the fuss is about these holy FTI cams, My cam will outrun any thing Ed can make and I will give my specs to anyone who wants them for just 1 dollar

Yeah, your 9.1 @79 is smoking. Good cam choice....

I guess if your cam is that good, you should start your own company. You could call it D.A.R. Dumb A** Racing.

If your post was a joke, I apologize for my reply. If not, don't knock Ed Curtis. He has forgotton more about building motors than you'll ever know.

Ed Curtis Cam is here!!!

Killercanary

The car that set the bar.

302efi

Member

Sleepy McNastee

New Member

zenboy99

The Hitman

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

The Hitman

94GTLaserRC

Squint as you approach, lest you be blinded by my

Imyourzero

Learned that lesson as a horny teenager with lots

Stangfreak95

add a 4

The Hitman

Imyourzero

Learned that lesson as a horny teenager with lots

The Hitman

CivicEater

New Member

GTJake

Kornnut

Imyourzero

Learned that lesson as a horny teenager with lots

95snoozer

Active Member

Stangfreak95

add a 4

onebad95

Sherriff of Bling King County

Similar threads

Ed Curtis Cam is here!!!

The car that set the bar.

Member

New Member

"STANGNET'S PENGUIN SMACKER"

Squint as you approach, lest you be blinded by my

Learned that lesson as a horny teenager with lots

add a 4

Learned that lesson as a horny teenager with lots

New Member

Learned that lesson as a horny teenager with lots

Active Member

add a 4

Sherriff of Bling King County

Similar threads

Privacy & Transparency

Privacy & Transparency