emissions help 347 stroker

lxwants12's

New Member
Sep 22, 2004
506
0
0
I live n phoenix and there emissions here...i need to know what kinda of adjustments to make and help me pass.....fuel pressure to run?? timing?? my car failed not horribly but it failed the gas part....and i need to know what are the general tricks for making a car pass...
 
What do you mean the gas part? Too many hydrocarbons? Are you using any sort of tuning device at all? What cam are you using in your engine? That may play a big part in your emissions, too.
 
How to pass emissions testing:

1.) Make sure all the emissions gear the car was made with is present and connected up properly. That includes a working smog pump and cats.

2.) Make sure that you have fresh tune up with spark plugs, plug wires, cap, rotor, fuel & air filters. An oil & filter change is a good idea while you are at it.

3.) Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/article...c-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/det...iption.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $33.

4.) Post the codes and get help to fix them. Don’t try to pass with codes not fixed. Clearing the computer just temporarily removes them from memory, it doesn’t fix the problem that caused the code to be set.

5.) Be sure to do the testing on a hot engine. Drive for 15-20 minutes prior to taking the test to get operating temps up into the normal range. Do not shut off the engine while waiting for your turn on the test machine. An engine up to full operating temperature puts out fewer emissions.
 
The lower the timing is the better the emmisions are suppose to be. Try to set it at 8* because if it's anything like Kali, it's suppose to be set at 10* but you can probably get away with 8*. Run regular fuel if you can with your engine(don't destroy the engine). The lower octane will create a more explosive(ping) and less burn... leaner running basically. Drive the car moderately hard for 30 minutes before you smog. The cats take a little time to warm up to operating temp. The hotter the cats are... the more efficiently they will work. MSD box if you don't have one is suppose to really help. My friend failed once and threw one on and it passed with flying colors. He now swears by it but don't take my word for it. Make sure your cats are in working order. If you have the stock cats they might be going bad. Magnaflow makes a carb legal x pipe if yours aren't up to the task. Hope it helped.
Kevin