• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Facts & Opinions: 245 vs 275 (For Front Tires)

  • Thread starter Thread starter topless98gt
  • Start date Start date Nov 4, 2006
  • 1
  • 2
Next
1 of 2 Next Last

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Nov 4, 2006
#1
  • Nov 4, 2006
  • #1
I am going to soon be buying some tires and was wondering what the advantages and disadvangages were to 275's over 245's for the front tires. Can you please share with me both your opinions and the facts that you know about the handling, performance, noise, gas milage, etc on these widths? Thanks!

P.S. If it makes a difference, the tires will be going on 18x9 wheels. Also if it matters what the front tires will be paired with, I will be getting 315/35ZR18s in the back on 18x10 deep dish wheels.
 

SRT Handz

I tripped & fell down and cut myself & got blood
Oct 10, 2004
941
23
19
La Mirada, CA
Nov 4, 2006
#2
  • Nov 4, 2006
  • #2
245 Tires are not wide enough for a 9 inch rim.... they will look all stretched

...get the 275's
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Nov 4, 2006
#3
  • Nov 4, 2006
  • #3
please tell me where you have found a 315/35/18 tire?

Go with 265's up front. 275's may* rub (my Proxes do)
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Nov 4, 2006
#4
  • Nov 4, 2006
  • #4
topless98gt said:
P.S. If it makes a difference, the tires will be going on 18x9 wheels.
Click to expand...

Yes it makes a difference. 9 inch rims are way too wide for 245s. They look retarded and youll risk scraping your rims. I have 265/35s - just slightly lower sidewall, width is resonable. I'm going 275/35 next time. Exactly the same height as stock and perfect width for an 18x9 rim (I have them on the back right now).
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Nov 5, 2006
#5
  • Nov 5, 2006
  • #5
SRT Handz said:
245 Tires are not wide enough for a 9 inch rim.... they will look all stretched

...get the 275's
Click to expand...
I currently have 245s on 18x9s in the front and have always wondered why the look funny. Thanks!

helty said:
please tell me where you have found a 315/35/18 tire?

Go with 265's up front. 275's may* rub (my Proxes do)
Click to expand...
Thanks for not being a dick and saying "315/35/18 doesn't exist! You're stupid!" I didn't do my research before posting, but did afterwards. I could not find any ANYWHERE. Best I could find was 315/30/18. Do you know if there is any spacing difference up front between the early SN95 and the late SN95 platform?

007 said:
Yes it makes a difference. 9 inch rims are way too wide for 245s. They look retarded and youll risk scraping your rims. I have 265/35s - just slightly lower sidewall, width is resonable. I'm going 275/35 next time. Exactly the same height as stock and perfect width for an 18x9 rim (I have them on the back right now).
Click to expand...
I have scraped my rims MANY times...these wheels and tires came on the car when I bought it 2 years ago. I'll look into the 265/35s. Thanks a bunch.


Thank you for your opinions guys. I think I have made my mind up on some BFGoodrich KDW-2s, 265/35/18 in the front and 295/35/18 in the back. (blech, wish I could get wider in the KDW-2s)

Does anyone know if 335/30/18 will fit in the back with exhaust modifications? I haven't been able to find any discussion about this. Thanks again guys.
 

streethorse

15 Year Member
Oct 8, 2005
1,042
6
58
Dallas Texas
Nov 5, 2006
#6
  • Nov 5, 2006
  • #6
I had a thread a couple of weeks back asking what I should run on my 17x9
wheels.... I was running 255's all around which made for really tight handeling.
the sidewalls were flat to the rims and looked good and protected the rims
from scraping. Most people who replied said I should go with 275's all the
way around.... so I did, got the bfg g-force, and I'm glad I did.. they have
a way better, meaner look, softer ride, no rubbing at all in front (not lowered)
Mabey just a tiny bit of a sidewall flex feel when doing hard turns but overall
nice improvment. Some people said they had a tracking issue where the front
wheels would follow groves or imperfections in the road with 275's but I have
not had that problem at all........also these tires are awesome for the $.
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Nov 5, 2006
#7
  • Nov 5, 2006
  • #7
KDWs are a good choice. Mine have a nice rim protecting edge that extends out a little. I'd always scrape my tire before the rim - but thats never happened yet. I'll go 275 next time, but 265s are fine too.
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Nov 6, 2006
#8
  • Nov 6, 2006
  • #8
I don't have the 18's, but I have 17x9 in the front with 275's, and aside from the fact that they are Sumi's (which suck ass on the highway, and grab every single line in the road and veer off with them,) I haven't noticed any difference at all, in handling, gas mileage, noise, etc.
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Nov 6, 2006
#9
  • Nov 6, 2006
  • #9
topless98gt said:
Thanks for not being a dick and saying "315/35/18 doesn't exist! You're stupid!" I didn't do my research before posting, but did afterwards. I could not find any ANYWHERE. Best I could find was 315/30/18. Do you know if there is any spacing difference up front between the early SN95 and the late SN95 platform?
Click to expand...
lol, no problem. I know BFG lists that size on their site, but as far as I (and a LOT of guys with 18" DD) know, they are a myth. I have 315/30/18 BFG DR's on now and they look but suck in the rain

Im probably gonna have to go with 295/35's and maybe a 1/4" wheel spacer, if I want to keep that look.

I do not know if there is a spacing difference between the SN-95s and New Edge stangs, sorry.
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Nov 6, 2006
#10
  • Nov 6, 2006
  • #10
helty said:
lol, no problem. I know BFG lists that size on their site, but as far as I (and a LOT of guys with 18" DD) know, they are a myth. I have 315/30/18 BFG DR's on now and they look but suck in the rain

Im probably gonna have to go with 295/35's and maybe a 1/4" wheel spacer, if I want to keep that look.

I do not know if there is a spacing difference between the SN-95s and New Edge stangs, sorry.
Click to expand...
Having 315s vs 295s w/ 1/4" spacer I don't think will create the same look. I really want the look of a friggen wide @$$ tire back there. If you're looking for the look of them sticking out flush with the quarter panel, maybe a 1/2" will do the trick. Just remember that 20mm (315mm - 295mm = 20mm) is equivelent to 0.787in.

I REALLY want some 335s if they would fit!

EDIT: The 335s won't be available until January. They said 315s might even be available then too.
 

MineralMan

Active Member
May 17, 2005
146
76
38
San Diego, CA
Nov 6, 2006
#11
  • Nov 6, 2006
  • #11
I guess that I'll chime in with my setup, previous and current.

My previous setup was 18x9" Mach 1 rims all around, with 275/3518 BFG gForce KDW2. The tires handled great, although they pulled at every crack in the road, and we have some *****ty roads here in San Diego. Up front, the edge of the wheels/tires sat flush with the outer fender edge, but in the back they didn't. I installed a 1" spacer on the rear, which pushed the tires out flush with the fenders.

After that set of tires wore out, I purchased a set of BFG gForce Sports, same size all around. The gForce Sports provide just as much traction, but aren't nearly as loud as the KDWs on the freeway. I never had the KDWs on the track, but I just had the Sports on the track last weekend. The surface was traction limited for everyone there, so I can't really comment on how well they hook on the track. Impromptu launches on the street, they hook about the same.

For pics of my setup, check out my website.
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Nov 6, 2006
#12
  • Nov 6, 2006
  • #12
topless98gt said:
EDIT: The 335s won't be available until January. They said 315s might even be available then too.
Click to expand...
who is "They"? Did you speak with BFG? Cause if they're gonna come out with 315s in a street tire (even if they are 30 profile) thats sweet.

Theres a guy in our car club with 295s and they look pretty sweet. Maybe a 1/4 isnt enough, but I think it will still look badass, like this.....

 

Attachments

  • 312Sig.webp
    12.7 KB · Views: 441
S

Saleen4971

New Member
Mar 26, 2003
664
0
0
Setauket, LI
Nov 6, 2006
#13
  • Nov 6, 2006
  • #13
i agree with the 275's on a 9"

i have sumitomo 275/40R17 on a 17x9, adn it follows EVERY curve/bump/whatever in the road
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Nov 6, 2006
#14
  • Nov 6, 2006
  • #14
I currently run 275's on my front tires and they do rub a little bit on a full lock turn. I would have gone with 265's, but i got the tires with the rims and it was a good deal.
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Nov 7, 2006
#15
  • Nov 7, 2006
  • #15
It's weird, but I hear a rubbing sound when I turn my wheels all the way, either way. I've had a few of my friends look at it while I was turning the wheel, they said they could see any rubbing! It boggles my mind. This is with 245s on 18x9s.

helty said:
who is "They"? Did you speak with BFG? Cause if they're gonna come out with 315s in a street tire (even if they are 30 profile) thats sweet.

Theres a guy in our car club with 295s and they look pretty sweet. Maybe a 1/4 isnt enough, but I think it will still look badass, like this.....

Click to expand...
That is flippin' SWEET. Please tell me EXACTLY how he achieved that look...are those only 295's?!

P.S. Wheel spacers (that come with inline studs) are outrageously expensive...but they may actually be worth it.

BaXTeR3221 said:
I currently run 275's on my front tires and they do rub a little bit on a full lock turn. I would have gone with 265's, but i got the tires with the rims and it was a good deal.
Click to expand...
For the tires I want, 265's are $2 more per tire. Do you think they'd be worth the extra $4? haha...
 

Attachments

  • 312Sig.webp
    12.7 KB · Views: 2,938
T

twothousandgt

Member
Mar 23, 2006
34
0
6
Woodinville, WA
Nov 7, 2006
#16
  • Nov 7, 2006
  • #16
WOW. i am about to purchase the KDW2s 295/35/18 and I want that look so bad. my 285s arent cutting it. are those seriously 295s?
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Nov 7, 2006
#17
  • Nov 7, 2006
  • #17
After looking at the picture, I think they are exactly the 295 KDW-2s!!! Look at the tread pattern!

I just wonder what kind of spacer he used!
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Nov 7, 2006
#18
  • Nov 7, 2006
  • #18
topless98gt said:
For the tires I want, 265's are $2 more per tire. Do you think they'd be worth the extra $4? haha...
Click to expand...

I'd go for it

For reference, here is an different 295 tire on 18x10 saleen replica's:

 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Nov 7, 2006
#19
  • Nov 7, 2006
  • #19
255 up front
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Nov 7, 2006
#20
  • Nov 7, 2006
  • #20
twothousandgt said:
WOW. i am about to purchase the KDW2s 295/35/18 and I want that look so bad. my 285s arent cutting it. are those seriously 295s?
Click to expand...
No, they are 315/30/18 BFG Drag Radials. The largest size (as of now) that BFG makes in a street tire for us is 295/35s. They look good, but not as good as the 315s

I want a 315 street tire bc 1) it lasts longer, and 2) its a LOT safer in the rain.

Some companies manufacture a 315 street tire, like Michilen, but they're outrageously expensive, like $350+ per tire. On top of that, BFGs run wider than most other brands, so even a Michellin 315 may* not give us that same
look.
topless98gt said:
After looking at the picture, I think they are exactly the 295 KDW-2s!!! Look at the tread pattern!

I just wonder what kind of spacer he used!
Click to expand...
nope, 315/30 BFG Drags. The outer tread pattern is similar, but they are DR's, not the KDW2's that kick ass in dry AND rain.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

H
Best tire size for 91 Fox 18x9 wheels. On coilovers
  • hassler
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
432
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
KRUISR
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
117
Other Classifieds Jun 2, 2026
optionizerSS
O
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
496
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Today at 5:49 PM
85GT4V
Wheels-Tires What size tires for a 18x10/18x9 setup?
  • AnthonyA1234
  • Dec 8, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech Dec 27, 2024
LX Dave
18” vs. 17” wheels on fox
  • dz01
  • Nov 14, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 28, 2024
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?