Finally dynoed my GT40P 300rwhp combo!!

Killer95Stang · Jun 26, 2005

mootang said:
congradulations. is that sae corrected?

Yes!! More power to come... I promise...

mootang · Jun 26, 2005

is the car tuned with a chip or programer? i'm guessing it is judging by your a/f curve.

if so where did you go or what did you use?

Killer95Stang · Jun 26, 2005

mootang said:
is the car tuned with a chip or programer? i'm guessing it is judging by your a/f curve.

if so where did you go or what did you use?

I use the Tweecer..

All the tuning was done by me, using resources like Stangnet, Corral, and the Tweecer forum... Plus I received great help from people like Grady (Final-5.0), and Donnie (SSKiller)... I've been pretty lucky so far, because most of the tweaks I've done have worked, but I guess proper planning, and research helped a little with that... Since I've had chips before.. and realized how expensive it can get having to go to a tuner for changes, and how hard it is to find a tuner that you can trust.. I just decided this was the best option for me...

5.0_GT_kid · Jun 26, 2005

Congrats on reaching your goal!

94gtslow · Jun 26, 2005

Wow that is really kewl. Good job on that combo.

Now I need to get rid of my e-cam and port my heads and gte some roller rockers, etc...

urban96 · Jun 26, 2005

very nice, i cant wait to get my p combo running

super302 · Jun 26, 2005

Very nice numbers, i'm hoping to hit 290rwhp with my combo

glenn95gt · Jun 26, 2005

how much was the porting and the cam?

super302 · Jun 26, 2005

glenn95gt said:
how much was the porting and the cam?

"Here's the major parts...
Porting by Neil Erickson = $350
Milling 0.030"= $50
valvetrain = $275 with stainless valves
Custom cam = $300
Used Edel RPM intake (ebay) = $350 shipped

So.. for $1250-$1400.. you can get all the main parts..."

final5-0 · Jun 26, 2005

Just saw the good news as I've been out of town for a few days.

Good for you & glad things worked so well!

Later
Grady

urban96 · Jun 26, 2005

super your running almost the same combo as im building (ported p's, 2031 cam, cobra intake)

super302 · Jun 26, 2005

urban96 said:
super your running almost the same combo as im building (ported p's, 2031 cam, cobra intake)

blksn955.o · Jun 27, 2005

great numbers, I am hoping to get to a dyno again soon for my gt40/explorer/tfs1 combo "after sorting issues" numbers.

I have a question for you with the tweecer what timing are you running with it? I have a .060 shave (on non P gt40's) and should be around 10.5:1-11:1 comp. with the DSS shortblock, with semi-polished chambers I have been able to go to about 31-32* with the tweecer but am scared to go any higher.

Killer95Stang · Jun 27, 2005

blksn955.o said:
great numbers, I am hoping to get to a dyno again soon for my gt40/explorer/tfs1 combo "after sorting issues" numbers.

I have a question for you with the tweecer what timing are you running with it? I have a .060 shave (on non P gt40's) and should be around 10.5:1-11:1 comp. with the DSS shortblock, with semi-polished chambers I have been able to go to about 31-32* with the tweecer but am scared to go any higher.

I'm sitting at about 9.8-9.9:1 compression... 91 octane gas (yeah CA sucks for gas).. and I ran 32 total degrees for timing.. I used a modified version Darren Woodals tuning notes... and just lowered timing across the board.. (he used 36 degrees)... Also.. since this was a dyno day type event, with over 35-40 cars dynoing, I didn't have any time to play with the tunes... I just had my good base tune... and made two more with one having 5% less fuel and the other 5% more fuel... I got the most power with the 5% leaner mixture.. and but also hit 14:1 at the top... which got a little scary..

blksn955.o · Jun 27, 2005

I was looking at DW thing too, and was just scared to hit 36 with iron heads and the comp. I am running. My last dyno was on a group day as well so I just checked my A/F to make sure I was getting what I commanded. I should be someplace in the same hp numbers as you since we have a sim. setup. You have me stoked about getting back to the dyno.

congrats on the combo/numbers

TMC · Jun 28, 2005

Nice job on meeting you’re goal of 300+ rwhp! I think that is a very respectable accomplishment

95snoozer · Jun 28, 2005

glad its finally together. now go get your valve springs done and get me some ET results. i say 12.7 at 110 on street tires

Scott_95GT · Jun 28, 2005

That is awesome. Like others said, very impressive, especially with factory heads.

5.0_GT_kid · Jul 21, 2005

Giving this thread the bump because I have the dyno videos!

You can view them by going here...please right click and save as!

http://www.tbmustangs.com/eric/Dyno Videos/Killer1995Stang.mpg

Pokageek · Jul 22, 2005

Great run! Keep up the ground breaking.

Finally dynoed my GT40P 300rwhp combo!!

Killer95Stang

New Member

mootang

New Member

Killer95Stang

New Member

5.0_GT_kid

94gtslow

urban96

bubb rubb says:"woo woooooo"

super302

I'd do anything for free Bapples

glenn95gt

super302

I'd do anything for free Bapples

final5-0

Mustang Master

urban96

bubb rubb says:"woo woooooo"

super302

I'd do anything for free Bapples

blksn955.o

Killer95Stang

New Member

blksn955.o

TMC

95snoozer

Active Member

Scott_95GT

New Member

5.0_GT_kid

Pokageek

Active Member

Similar threads

Finally dynoed my GT40P 300rwhp combo!!

New Member

New Member

New Member

bubb rubb says:"woo woooooo"

I'd do anything for free Bapples

I'd do anything for free Bapples

Mustang Master

bubb rubb says:"woo woooooo"

I'd do anything for free Bapples

New Member

Active Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency