• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Progress Thread Finally got my first Fox Body - 1988 GT

  • Thread starter Thread starter DudeStang
  • Start date Start date Feb 7, 2020
  • Tags Tags
    fox body 5.0 grater mustang gt white fox
Prev
  • 1
  • …
  • 35
  • 36
  • 37
  • 38
  • 39
  • …
  • 54
Next
First Prev 37 of 54 Next Last

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
Feb 7, 2021
#721
  • Feb 7, 2021
  • #721
Insulation makes a huge difference in the garage. When I bought my house, the garage was uninsulated. In the middle of winter it was in the 20-30s in the garage.

I added insulation, and when I wired it I added a 220v circuit or two. I bought a 3600 watt electric heater and now can get it up to 70 degrees when it’s 10-20 outside. It’s made working in the garage much more tolerable.
 
Reactions: General karthief

DudeStang

Nuts fell off while driving
5 Year Member
Apr 30, 2017
659
373
83
Feb 7, 2021
#722
  • Feb 7, 2021
  • #722
Rdub6 said:
Oh no!! Pushed to the outside..... say it ain’t so!
Click to expand...
The new vehicle cost $35k...the Fox cost $5k.

*Thanos voice: “it’s a simple calculation”

The Fox will get plenty of garage time no doubt...especially once it warms up. The black car didn’t have a garage the first two years I owned it and I hate leaving it outside.

I might look into some type of carport or canopy option for the side yard next to the drive way but until we move into a bigger house one day and I can get my three or four car garage, I’m going to have to play musical cars. Blah.
 
Reactions: Rdub6

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
Feb 7, 2021
#723
  • Feb 7, 2021
  • #723
Your $5k fox is slowly creeping up towards $10k the more to clean it up and address issues. All these little things you are fixing do make a difference.

A few years from now, it will be worth more than whatever vehicle kicked it out of the garage. Not picking on the choice of vehicle at all, it’s just a sad reality at how most cars depreciate so rapidly.
 
Last edited: Feb 7, 2021

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,955
2,937
153
Long Island, NY
Feb 7, 2021
#724
  • Feb 7, 2021
  • #724
DudeStang said:
The new vehicle cost $35k...the Fox cost $5k.

*Thanos voice: “it’s a simple calculation”

The Fox will get plenty of garage time no doubt...especially once it warms up. The black car didn’t have a garage the first two years I owned it and I hate leaving it outside.

I might look into some type of carport or canopy option for the side yard next to the drive way but until we move into a bigger house one day and I can get my three or four car garage, I’m going to have to play musical cars. Blah.
Click to expand...
I’ll steal this from the funny picture thread.....
 
Reactions: arnie93lx, Willybill32, Steel1 and 3 others

DudeStang

Nuts fell off while driving
5 Year Member
Apr 30, 2017
659
373
83
Feb 8, 2021
#725
  • Feb 8, 2021
  • #725
Mustang5L5 said:
Insulation makes a huge difference in the garage. When I bought my house, the garage was uninsulated. In the middle of winter it was in the 20-30s in the garage.

I added insulation, and when I wired it I added a 220v circuit or two. I bought a 3600 watt electric heater and now can get it up to 70 degrees when it’s 10-20 outside. It’s made working in the garage much more tolerable.
Click to expand...
How about the garage door? Did you change anything with the door?

Mustang5L5 said:
Your $5k fox is slowly creeping up towards $10k the more to clean it up and address issues. All these little things you are fixing do make a difference.

A few years from now, it will be worth more than whatever vehicle kicked it out of the garage. Not picking on the choice of vehicle at all, it’s just a sad reality at how most cars depreciate so rapidly.
Click to expand...
Fair point...though I have read that [spoiler alert] Subarus hold their value pretty well.

My plan is to at least keep the cover on the Fox when it’s out of the garage. I’ll probably get a cover for the DudeStang for when the Fox is taking the garage space for extended wrenching.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
Feb 8, 2021
#726
  • Feb 8, 2021
  • #726
DudeStang said:
How about the garage door? Did you change anything with the door?
Click to expand...

Nope, although I need two new doors for other reasons
 
Reactions: DudeStang

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Feb 8, 2021
#727
  • Feb 8, 2021
  • #727
The door insulation depends on the doors you have. Make sure the sides have the trim with the rubber lip. Shouldn't see any light when door is closed from outside. In a previous house I cut down some green foam insulation from Lowes to fit in a bare metal door. Can't say whether it really helped or not. The garage chill was broken with 4 hologen 500w pedestal lights. Warm enough to have to take your coat off when working.. The biggest impact was stopping the drafts.
 
Reactions: General karthief and DudeStang

DudeStang

Nuts fell off while driving
5 Year Member
Apr 30, 2017
659
373
83
Feb 11, 2021
#728
  • Feb 11, 2021
  • #728
So I did some googling on this and all I could find was stuff about how to make ramps out of wood....but anybody have any thoughts on getting some planks of wood to put underneath ramps? I want to have the Fox up higher than it sits on the ramps and I figure if I get a couple pieces of wood to put underneath them, they could serve the dual purpose of making it easier to drive on and off the ramp while also making the car sit a little bit higher on the ramps. If this is a stupid idea, feel free to tell me so.

Anyways, it’s snowing here again. I made a non-update update video. The Fox being in the driveway upset some other people, lol. Not to worry though, I will be moving it back into the garage soon so I can try and make some progress on things that don’t require laying on the floor.

View: https://youtu.be/lXjmyNBUDo8


Anyone else bored out of their minds lately? I feel like I didn’t understand just how helpful and therapeutic it was being able to work on the Fox project...until I couldn’t. My work has been a lot busier but it’s a different kind of busy. It’s not the same as completing something on the car after hours or days. Blah.
 
Reactions: General karthief

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,955
2,937
153
Long Island, NY
Feb 11, 2021
#729
  • Feb 11, 2021
  • #729
Personally, I stopped actually driving onto the ramps a long time ago. I jack up the car, and slide the ramps under. Too many times they have shifted as I go up or down, so enough with that!
That being said..... have you thought of building some crib blocks out of 2x4? A lot of guys have good success with those.
As far as the therapeutic of the car project..... that’s a big part of it for me. I can go put my mind on that, try to forget about the stress of work, and have some fun.
Especially in a winter of snow and covid..... there is absolutely nothing else going on!
 
Reactions: DudeStang

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Feb 11, 2021
#730
  • Feb 11, 2021
  • #730
I built a set of cribbing blocks out of 2x4s with the sole intention of using them when I welded in a set of jacking rails,
they worked great and are rock solid.
I would have to measure but I think I built them 12"-14" high, simple 2x4 and screw construction.
They do get the car a little higher than jack stands being that the cars tires are resting on them and it
is very stable.
There's some drawbacks ,you have to be able to get the car up on them , they are heavy and they are not
easy to store if you have limited space.
 
Reactions: DudeStang

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,935
10,575
203
polk county florida
Feb 11, 2021
#731
  • Feb 11, 2021
  • #731
If you are looking for just a few inches I took a length of 2x10 and cut and stacked, held together with screws with the ends beveled and got a little over 3" . It made more room to run the jack under the front and jack it up too.
I like the wooden crib method too.
 
Reactions: DudeStang and Willybill32

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,955
2,937
153
Long Island, NY
Feb 11, 2021
#732
  • Feb 11, 2021
  • #732
General karthief said:
If you are looking for just a few inches
Click to expand...
Shopping for a new CT?
 
Reactions: DudeStang, Potomus Pete and General karthief

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,935
10,575
203
polk county florida
Feb 11, 2021
#733
  • Feb 11, 2021
  • #733
Rdub6 said:
Shopping for a new CT?
Click to expand...
You'd think I was. That one is a toss up compared to the one I got already.
Can't believe I did that
 
Reactions: Rdub6

Willybill32

But at least it's tight!
5 Year Member
Jul 16, 2019
630
354
83
Lexington, KY
Feb 12, 2021
#734
  • Feb 12, 2021
  • #734
General karthief said:
If you are looking for just a few inches I took a length of 2x10 and cut and stacked, held together with screws with the ends beveled and got a little over 3" . It made more room to run the jack under the front and jack it up too.
I like the wooden crib method too.
Click to expand...
First time I tried to run the Jack under the front of my Fox after the lowering springs were installed was an experience! Even my low-profile jack wouldn’t fit.
 
Reactions: DudeStang

DudeStang

Nuts fell off while driving
5 Year Member
Apr 30, 2017
659
373
83
Feb 15, 2021
#735
  • Feb 15, 2021
  • #735
Steel1 said:
I built a set of cribbing blocks out of 2x4s with the sole intention of using them when I welded in a set of jacking rails,
they worked great and are rock solid.
I would have to measure but I think I built them 12"-14" high, simple 2x4 and screw construction.
They do get the car a little higher than jack stands being that the cars tires are resting on them and it
is very stable.
There's some drawbacks ,you have to be able to get the car up on them , they are heavy and they are not
easy to store if you have limited space.
Click to expand...

General karthief said:
If you are looking for just a few inches I took a length of 2x10 and cut and stacked, held together with screws with the ends beveled and got a little over 3" . It made more room to run the jack under the front and jack it up too.
I like the wooden crib method too.
Click to expand...

Do you guys have pictures of these you could share? Thanks.
 

DudeStang

Nuts fell off while driving
5 Year Member
Apr 30, 2017
659
373
83
Feb 15, 2021
#736
  • Feb 15, 2021
  • #736
I realized a few days ago it had been a year since I bought the Fox...and since it’s still too cold out, I made a video talking about most of the things accomplished on the car over the past year (a lot of it wouldn’t have been done without the folks on this particular forum). Thanks for all your help, guys.

View: https://youtu.be/p3mzN7GEdXQ
 
Reactions: Steel1 and Rdub6

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Feb 15, 2021
#737
  • Feb 15, 2021
  • #737
Here's some pics of the cribbing I built.
Simple 2x4 and screw construction. I almost had enough leftover lumber from various home improvement
project to complete these but did have to by a few 2x4s , cheap enough though.
They are heavy but can be stacked , I keep all 4 of them in my basement just don't have room in the garage.
 
Reactions: Boostedpimp and 90sickfox

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,955
2,937
153
Long Island, NY
Feb 15, 2021
#738
  • Feb 15, 2021
  • #738
Stole this from the web...... but it gives you a good idea of the clearance you get. And for me...... I’d actually feel safer under that than those plastic/ composite car stands.
 
Reactions: DudeStang

Potomus Pete

I'm still waiting for the fully nude shots
5 Year Member
Mar 7, 2019
3,308
1,223
153
Sarasota Florida
Feb 15, 2021
#739
  • Feb 15, 2021
  • #739
Stupid Question: How do you get the car up there. Just jack all around a little at a time. The blocks are nailed together?
 
Reactions: DudeStang
S

sd331

Member
Sep 9, 2008
69
19
18
NJ
Feb 15, 2021
#740
  • Feb 15, 2021
  • #740
Potomus Pete said:
Stupid Question: How do you get the car up there. Just jack all around a little at a time. The blocks are nailed together?
Click to expand...
floor jacks under the rear axle and front subframe ( i used a piece of 2x6 between the jack and front subframe)...my cribs are 12 inches high..its best to have 2 people to get it up and down...theres alot of room under the car to work when its on the cribs...yes nails or screws holds it together
 
Last edited: Feb 15, 2021
Reactions: Potomus Pete
Prev
  • 1
  • …
  • 35
  • 36
  • 37
  • 38
  • 39
  • …
  • 54
Next
First Prev 37 of 54 Next Last
You must log in or register to reply here.

Similar threads

CJ Customer Rich's 1993 Fox Body Mustang GT Build
  • CJPonyParts
  • Aug 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
225
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 7, 2025
Noobz347
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
570
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
J
Fox body - godzilla, coyote, or 408w stroker - Best route for budget build?
  • jaygee15
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 30, 2025
2000xp8
D
Brakes 88 LX 5.0 - help! no brakes
  • DRGunn427
  • Feb 26, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
431
Fox 5.0 Mustang Tech Feb 27, 2025
nickyb
F
if you love something set it free... my fox body returned to me.
  • FADCultra
  • Apr 16, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 23, 2024
90sickfox
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?