• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Finally My DYNO numbers are IN

  • Thread starter Thread starter Mustanggt108
  • Start date Start date Jul 3, 2006
  • 1
  • 2
Next
1 of 2 Next Last
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Jul 3, 2006
#1
  • Jul 3, 2006
  • #1
Guys this is the WORST thread i'm writting.I'm in a really bad bad mood right now.I've been waiting for sooo long to get my car on a dyno...i wish i never did
Dyno Results :
1st Run with all mods in sig but withought the Xcal2 Tune
Max rwhp 220
2nd Run same as first Max rwhp 217
3rd run with Xcal2 93 Octane Tune
Max rwhp 237.2

Is this sound right to you guys!!!?? i thought having a manual GT should atleast produce 230rwhp STOCK
because i was seriously expecting 250-270rwhp
NOTE: The weather was Really Hot and the dyno used was an australian made Dyno called: Dyno Dynamics. Its a 4wheel drive dyno type like the ones used for EVO's
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
Jul 3, 2006
#2
  • Jul 3, 2006
  • #2
nope sounds about right to me.
I'm familiar with the dyno you mention they do tend to read a touch lower but not alot. Just remember dyno's are for tuning, take it to the track and see what it runs.
 

stangliter04

New Member
Apr 4, 2005
185
0
0
Port St John, Florida
Jul 3, 2006
#3
  • Jul 3, 2006
  • #3
I would think you would see around 245 or so but like booWFO said its a tuning tool.
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Jul 3, 2006
#4
  • Jul 3, 2006
  • #4
oh yah i forgot to mention , my A/F ratio is 12.2 and my best torque was 270.
\And NO 220rwhp is Not normal with the mods i have , sorry to say that
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jul 3, 2006
#5
  • Jul 3, 2006
  • #5
without a tune on that dyno yes it is about right. dont get caught up in dyno numbers though man. Mine suck.. but I ran 13.0 in a vert N/A on worn street tires.

Get some track times this fall and you'll feel much better.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 3, 2006
#6
  • Jul 3, 2006
  • #6
I think your expectations are alittle high...you don't really have any power mods...
pulleys=5hp
mid-pipe=5-10hp
plenum/tb=5hp
flowmaster=0 and have been known to rob hp...
CAI=0
so don't expect a 30-40hp bump.
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Jul 3, 2006
#7
  • Jul 3, 2006
  • #7
DropTopPony said:
I think your expectations are alittle high...you don't really have any power mods...
pulleys=5hp
mid-pipe=5-10hp
plenum/tb=5hp
flowmaster=0 and have been known to rob hp...
CAI=0
so don't expect a 30-40hp bump.
Click to expand...

Most of the advertised HP you see for mods is . They get you all pumped up with high expectations and then you see what they actually do. You will not see 270+rwhp without doing cams at a minimum from where you are. I had full bolt ons plus VT stage 2 cams and only put down 286rwhp. Don't be too down, listen to everyone, a dyno is just a tool, it's the loose nut behind the wheel that makes the car go fast .
 

04GTMustang

New Member
Feb 28, 2006
348
0
0
Stafford
Jul 3, 2006
#8
  • Jul 3, 2006
  • #8
dont feel bad man i expected about 240rwhp also on the dyno. I put 232rwhp with the mods in my sig but my torque was higher than urs i put down 274tq. I also richened up the fuel though because I thought i heard it pinging so who knows I probably screwed myself over. But just take it to the track and let her loose.
 
T

tradde

New Member
Aug 2, 2005
94
0
0
Pennsylvania
Jul 3, 2006
#9
  • Jul 3, 2006
  • #9
My first dyno on my stock 2000 GT was 223 on a Dynojet dyno. It's a 5-speed
just like yours. So I think your numbers are reasonable.
 

trinity_gt

10 Year Member
Jan 31, 2003
3,125
81
99
Canada
Jul 3, 2006
#10
  • Jul 3, 2006
  • #10
If you want to compare your numbers with those obtained on a Dynojet, get dyno'd on a Dynojet. You can't really even compare Dynojets to Mustang dynos although most people seem to think the MD shows numbers about 12-15% lower than a DJ.

Don't focus so much on the absolute numbers on any given dyno; the relative jump of 17HP with the XCAL2 tune says way more than fretting over not holding up to other dyno's numbers. As 01Steeda said, get to a track and see what it'll do...you'll probably be surprised.

FWIW, my 02 GT made 228HP stock on a Dynojet and sits at about 268 now with my mods, none of which are real power adders...
 
I

ilbehaved

New Member
Apr 2, 2005
23
0
2
madison, ms
Jul 3, 2006
#11
  • Jul 3, 2006
  • #11
where did you get your xcal2 from thats a nice gain from it

my local shop also has the dyno dynamics dyno and the numbers are always alot lower than a dynojet so i wouldnt worry about it.
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Jul 3, 2006
#12
  • Jul 3, 2006
  • #12
when i had your mods i was at 240...
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Jul 4, 2006
#13
  • Jul 4, 2006
  • #13
ADRENLN said:
when i had your mods i was at 240...
Click to expand...

i guess u guys are right
well for the guy who asked about my Xcal2 , i got it from MustangTuning but i got the tunes from the Great Mike from Xcal2 tech.And yah 17rwhp just from a 93 tune is not bad at all
I will get another dyno test when its colder i bet i will smash these sucky numbers i got well hopefully.
i'm currently editing all the vids i took at the dyno shop.I will post them very soon :SNSign:
 

04gtdrop

New Member
Jun 10, 2005
532
0
0
Sac, CA
Jul 4, 2006
#14
  • Jul 4, 2006
  • #14
yeah dont get too upset. i dyno'd stock at 237 or so. then i added a cai, t/b, plenum, h pipe, cat back, aluminum ds, gears and a custom tune and im only at 256hp and 293 tq.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jul 4, 2006
#15
  • Jul 4, 2006
  • #15
I thought those ##'s seemed a bit weird but maybe i'm wrong.

With your mods, I dynoed 259rwhp and 302rwtq without a tuner
 
Y

Yellow2002GT

New Member
Feb 20, 2006
148
1
0
Raeford, NC/ FT Bragg
Jul 4, 2006
#16
  • Jul 4, 2006
  • #16
I have about every bolt on you can throw on a mustang minus cams and with a handheld tuner it only put down 239 and 268.........Now if you get a custom dyno tune you will be amazed! How about 263 rwhp and 304 rwtq out of a 4R70W..!!! at 4100 rpms gained 58 more rwtq and at 4300 rpms gained 40 more hp with 25 at peak and 40 at peak! You can get the numbers out of bolt ons but you need to tune the timing and fuel per every rpm range not just Wide Open Throttle! This was tuned by a level 4 SCT tuner!

"ED"
 

fluffyrunnells

New Member
Feb 4, 2006
0
0
0
new hampshire
Jul 4, 2006
#17
  • Jul 4, 2006
  • #17
seems a little low to me..???????????????

similar mods with pro tune....248.??
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jul 4, 2006
#18
  • Jul 4, 2006
  • #18
guys.. dyno's are not to compare numbers from. It is fun to see what someone puts down,... but pointless. It is a tool that you can use to see what YOU have gained from a certain change. Nothing more.
 

ocbaud

Member
May 7, 2005
239
1
18
Midwest City, Oklahoma
Jul 5, 2006
#19
  • Jul 5, 2006
  • #19
your numbers do seem a little low to me...

with the mods in my sig, i put down 240hp & 282ft/lbs
 
T

trickyshadow

New Member
May 17, 2005
22
0
0
Jul 5, 2006
#20
  • Jul 5, 2006
  • #20
My 01 GT put down 244 hp and 285 tq with just a CAI, Diablo chip, Flowmasters and 4.10 gears, but each car is different. We just had a stock 03 Cobra put down 401 hp.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Engine Intake Temperature Dyno Difference
  • FastDriver
  • Jul 2, 2015
  • Fox 5.0 Mustang Tech
Replies
10
Views
11K
Fox 5.0 Mustang Tech Jul 5, 2015
Gearbanger 101
Typical RWHP numbers for my combination?
  • bhuff30
  • Apr 26, 2011
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
856
1996 - 2004 SN95 Mustang -General/Talk- Apr 27, 2011
SteedaGT9150
My DYNO #s are in!
  • hotmustang331
  • May 14, 2008
  • SN95 4.6L Mustang Tech
  • 2
Replies
23
Views
2K
SN95 4.6L Mustang Tech May 16, 2008
CENTENNIALSTANG
C
Please look at these dyno results
  • Steel
  • Oct 22, 2006
  • 2005 - 2009 Specific Tech
Replies
2
Views
1K
2005 - 2009 Specific Tech Oct 22, 2006
hubec
Dyno appointment set! Guess my #s!
  • hotmustang331
  • Feb 21, 2007
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
47
Views
4K
1996 - 2004 SN95 Mustang -General/Talk- Mar 4, 2007
billfisher
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?