Fox Mustang Fabricated Console Cup Holders

[Shakerhood]

very nice Shakerhood, what did you use for size template?

Not quite sure what you are asking but I got those cupholders out of a damaged console at the junkyard that looked to be about the correct size.

 

[madspeed]

didnt you have a writeup a while ago?

 

[Shakerhood]

didnt you have a writeup a while ago?

Yes, I did do a write up a few years back when I fabbed it all up. I was just going through my picture library and for some reason I am missing a few pics from the build up, go figure.

 

[Onefine88]

Neat ideas guys!

Here's mine

Been working great for years.

 

[old_blue]

between the ebrake and passenger seat for me.....

 

[Onefine88]

Been there done that too.

 

[Audiophile]

between the ebrake and passenger seat for me.....

Yep, me too. But, I know I need to come up with a better solution because its only a matter of time until I dump Coke all over my carpet.

 

[Shakerhood]

Yep, me too. But, I know I need to come up with a better solution because its only a matter of time until I dump Coke all over my carpet.

That's the reason I fabbed mine up.

 

[89oem]

ya hand brake seat cushion wedge = coffee all over the console and carpet...

shakerhood i thought you fabbed the entire piece, i now get you cut them from a jy donor and molded them in

 

[Shakerhood]

ya hand brake seat cushion wedge = coffee all over the console and carpet...

shakerhood i thought you fabbed the entire piece, i now get you cut them from a jy donor and molded them in

Correct, I cut cupholders out of a broken console from the JY and then cut out the ashtray section and grafted it in place.

 

[Kumm3]

And does this JY console come out of a particular model of vehicle?

 

[Shakerhood]

And does this JY console come out of a particular model of vehicle?

I honestly don't know what vehicle the donor cupholders came from, I got them from a broken console they had laying around, it looked to be about the right size and the price was cheap.

 

[MyBlackBeast]

Shakerhood nice work. Where do you purchase the fiberglass?

I used the factory ashtray door and shaved off the lip that opens it. Gives it a nice clean look.

 

[Shakerhood]

Shakerhood nice work. Where do you purchase the fiberglass?

I used the factory ashtray door and shaved off the lip that opens it. Gives it a nice clean look.

You can buy Fiberglass in just about any parts store, you also need to buy fiberglass mat which is a tight weave cloth, it gives strength to what you are fabbing.

 

[ReplayMan]

MyBlackBeast...my buddy wants one of these cup holders. Are you still making them. LMK

 

[Gearbanger 101]

Keep the requests for services limited to PM's, otherwise this thread goes away.