Fuel Vapor Line Question/302r

[Fury50]

I installed the 302r intake a few weeks ago with all the lines. There is a plug on the canister that i have nothing to plug to it. However I also have a plug on the complete opposite side of the motor that wants to plug into something but I don't know what. These 2 seem like a match made in heaven BUT the canister is near the firewall on the drivers side and the other plug is right next to the throttle body on the passenger side. No way in hell are they going to reach one another. Am I missing a plug extension?

btw the car started throwing the old "check fuel fill inlet" yesterday.

 

[stang8urimport]

The boss fuel line/evap line relocates the purge valve from by the throttle body on the stock intake to on the drivers rear of the intake. The boss has a specific purge valve and line assembly that connects it to near the throttle body. You just have to extend the wires to the drivers rear of the intake. You are getting this code, I'm sure, because you left the evap line open, causing the car to fail its evap self check.

The purge valve is the valve/line assembly on the bottom of this pic...

 

[Fury50]

thanks for the reply. yesterday morning i extended the wires. after driving about 10 minutes, turning the car off and then back on the message was gone. im surprised an extension has been overlooked by ford.