Good off the shelf cam

[tjh566]

Im looking for a good off the self cam that wont mess up my computer but will give me good gains. I like the low end power but also want a little up top too. Im going with thumper heads and a ported gt-40 intake. Thanks!

 

[wytstang]

This cam may give you what you're looking for imo Crane 2040, Valve Lift Intake w/1.6 rockers-.498, Valve Lift Exhaust w/1.6 rockers-.498, Duration Intake (at .050)-220, Duration Exhaust (at .050)-220, Lobe Center-110, Emissions Legal-Yes
It's like the Ford E cam but more for computer controlled cars. Finding a cam your puter will like is like finding a 100 bucks in your pocket good luck. The only cam that will deliver what you want is the stock cam using 1.7 RR for added lift.

 

[tjh566]

I was thinkin about the 1.7rr's, Will i run into any problems with them? any particular brand thats better?

 

[wytstang]

The stock cobra's used the Crane 1.7 RR summit part #crn-44746-16 these are "pestal mount" RR or bolt down, these are same as stock cobra RR.

 

[94GTLaserRC]

The "usual" O-T-S cams used in our cars are

Crane 2031/2030
Steeda #19
Crower 15511
RC

 

[tjh566]

Thanks guys.