GT40P Combo Porting Advice

Street89GT

Member
Jan 1, 2009
55
0
7
I have a set of GT40P heads and a tubular GT40 Upper/Lower. The lower has been port matched to a set of Trickflow heads by a previous owner. The ports are slightly taller and wider then the ports on the GT40P Heads. Would it be a good idea to port match the GT40P heads to the lower intake? I can post up pictures if that would help. Thanks in advance!
 
I would. But when you do it, only port about a half inch to an inch or so into the intake runners on the heads. Also, you dont want to smooth the intake runners, because the air/fuel mixture needs to be "shaken up" as it passes through for optimal burning. If you smooth them, the fuel will enter as bigger droplets and not burn as well.
 
Thanks for the reply. Will there be any adverse affect if I don't port match the heads to the lower intake? I measured and the lower intake ports are about 3/32" wider and 1/16" taller then the intake ports on the heads.