• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Has AnyOne Hit 200mph W/00-04 GT

  • Thread starter Thread starter GTR_Stang03
  • Start date Start date Jul 26, 2005
Status
Not open for further replies.
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Next
First Prev 3 of 7 Next Last

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Jul 27, 2005
#41
  • Jul 27, 2005
  • #41
QU!CK said:
Good luck to you man! 200mph sounds like a tough goal to reach but I think it's definitely possible.


For everyone saying "a couple of cobra's have done it..etc" keep in mind that those are 4v's and he wants to accomplish this with his 2v. Won't the fact of not having the 2 extra valves effect top end performance? (well, unless he crams some godzilla-ceiling-fan size turbo under the hood)


-J
Click to expand...


now with the power adders go for the biggest turbo you can find heck even twin turbo and the shot of nos. that a guaranteed 200mph run. mm&ff had that turbos can make 900hp on the v8 its all a matter of dialing in the motor tune and combine the with a dss block (some nice uber sweet engine management system thing you would need to do is delete the ac run an electric pump. matched cams for the turbos port and polish where nessecary.
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
Prattville, Alabama
Jul 27, 2005
#42
  • Jul 27, 2005
  • #42
John Maffucci was able to hit 200+ in his 2003 Cobra last year and set a new land speed record for the C/PS class. He did it with what I consider a reasonable amount of mods. His car is for sale now if anyone is interested.

http://www.ecta-lsr.com/forsale.htm

http://forums.stangnet.com/showthread.php?t=367885

U.M.

P.S. White Cobras are the fastest by the way...
 

03ghoststang

Well-Known Member
Jul 16, 2005
1,930
1
57
Los Angeles, California
Jul 27, 2005
#43
  • Jul 27, 2005
  • #43
i have a friend well he's the shop foreman where i use to work he goes to the salt lakes in this weird looking thing that has 4 wheels. but it can' be done on a stock block he has 500+ CI motor and it is all forged and custom made internals for that block the valves, springs well everything so you will have to get a new block with strong internals if you want to hit 200mph but hey good luck with that.
 
P

Pittsas

New Member
May 18, 2005
72
0
0
Auburn, Al
Jul 27, 2005
#44
  • Jul 27, 2005
  • #44
1st things 1st Roll Cage
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Jul 27, 2005
#45
  • Jul 27, 2005
  • #45
you will need to change out the trenny to get there. the 03 cobra has a 6 speed with more gears and closer gearing to make more USABLE top end speed. the 94-98 cobras had a T5 so no overdrive gear. one large issue is that the T45/3650 in the 99-04 cars have an Od gear that will take a TON of power to get you to 200. so either more power or new tranny.

also, no i dont think you can do it with bolt ons and spraying. you could possibly do it with a turbo or a blower (centrifugal because of the higher RPM ability over the KB).

also with a lot of 94-98 cobras doing it, well one major factor is that their aerodynamics are vastly better. same reason both GTs of that time top out at the same speed stock. both run out of power to get farther even though the 94-98 had a good deal less power. that and the tranny difference again.

Torinalth
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 27, 2005
#46
  • Jul 27, 2005
  • #46
just buy this one
http://www.ecta-lsr.com/forsale.htm
 

XXBULLETSXX

New Member
Mar 30, 2005
301
0
0
Kannapolis, NC
Jul 27, 2005
#47
  • Jul 27, 2005
  • #47
droptopponynj said:
just buy this one
http://www.ecta-lsr.com/forsale.htm
Click to expand...

I agree, buy that one. It will probably be cheaper than trying to set your's up to hit 200. And that one is a little piece of history. I would rather own a piece of history then to become it trying to do 200MPH in my GT!
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
Prattville, Alabama
Jul 27, 2005
#48
  • Jul 27, 2005
  • #48
droptopponynj said:
just buy this one
http://www.ecta-lsr.com/forsale.htm
Click to expand...
Yeah, a proven performer already!

U.M.
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Jul 27, 2005
#49
  • Jul 27, 2005
  • #49
she'll wanna start going airborne at about 165-170.....TRUST ME!!
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Jul 27, 2005
#50
  • Jul 27, 2005
  • #50
Dan_Soprano said:
she'll wanna start going airborne at about 165-170.....TRUST ME!!
Click to expand...

That's when you'd have to buy one of those huge stupid ricer wings.
 

jstreet0204

Active Member
Jun 26, 2003
939
0
36
Winston Salem, NC
Jul 27, 2005
#51
  • Jul 27, 2005
  • #51
Torinalth said:
you will need to change out the trenny to get there. the 03 cobra has a 6 speed with more gears and closer gearing to make more USABLE top end speed. the 94-98 cobras had a T5 so no overdrive gear. one large issue is that the T45/3650 in the 99-04 cars have an Od gear that will take a TON of power to get you to 200. so either more power or new tranny.
Click to expand...

I think your tranny info is a little off here. The t5 actually has a taller overdrive than any of the other trannies you listed, at .68. The t45, 3650, and t56 in the cobra all have a final overdrive of .62 or .63. The t56 does have that extra gear to help in getting there, but the the top speed would not be any higher except with t5 or maybe the viper version of the t56, which I think has a final overdrive of .70
 

CaliLifeStyle

New Member
Jun 9, 2004
625
0
0
Oxnard, CA
Jul 27, 2005
#52
  • Jul 27, 2005
  • #52
I recommend a parachute to help you stop.

Find out what Koenigsegg did. They took a 4.6L DOHC V8 with a centrifugal supercharger and ran 240+mph. In fact, they hold the record for the fastest production car in the world. I would find out what gears did they use in their transmission.
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Jul 27, 2005
#53
  • Jul 27, 2005
  • #53
jstreet0204 said:
I think your tranny info is a little off here. The t5 actually has a taller overdrive than any of the other trannies you listed, at .68. The t45, 3650, and t56 in the cobra all have a final overdrive of .62 or .63. The t56 does have that extra gear to help in getting there, but the the top speed would not be any higher except with t5 or maybe the viper version of the t56, which I think has a final overdrive of .70
Click to expand...

are you sure? i thought that the T5s had no OD at all, pretty much a standard step up from 1-5, as opposed to the 45/3650 which did have a true OD gear... i'll need to look into that one.

Torinalth
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 27, 2005
#54
  • Jul 27, 2005
  • #54
It can be done with the basic mods like someone posted, covering up the underside of the car,suspenion work also gonna need some big power 600 rwhp or so, 6spd some tall gears ,and a whole lot of trial and error.......oh ya some$$$,i seen trucks go ver 200 on discovery 226 mph actually,thats a pickup!!!diesel
 

SVTCobra66

Founding Member
May 4, 2002
384
0
16
Jul 27, 2005
#55
  • Jul 27, 2005
  • #55
Don't forget the new vette (with 400hp) can do 186mph out of the box. It can be done, but I'd be worried about it trying to fly... body kits won't work unless they were actually designed for downforce. Most of the ones you'll find are cosmetic.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 27, 2005
#56
  • Jul 27, 2005
  • #56
no doubt lift off could be a problem,lowering the car obviously is a must i really dont think you need the stang to be alterd so much though..i mean its not as bad as a truck in terms of aerodynamics .... if you lived close to the flats go for it,dont try it on the highway...hehe
 

billfisher

Active Member
Jul 17, 2005
1,296
4
38
huntsville, AL
Jul 27, 2005
#57
  • Jul 27, 2005
  • #57
200 mph

GTR_Stang03 said:
This is why I am asking... I wan't to do it. Salt flats is where it should happen. This is what I am doing to the car. Reinforcing the nose, a working air dam Cobra R OEM W/ all reinforcement hardware. ( After market does not have this....) I have the Cobra R rear wing. Pinned hood "a definate". Roll bars from ARP. One racing seat with harness.

Think it can be done??????
Click to expand...

of course it can be done. SALEEN sells(i guess they still do) aero body parts. You will need a wind tunnel or some kind of pre-engineered package(gus that already do it). Drag is the square of velocity. the down force required to make that kind of speed safe and keep the front end pointed first is probably high. (who knows) If I was to try it i would err on the safe side. you can get a hold of someone that runs the SILVER STATE CLASSIC to find out more. My guess is a front splitter an nascar angled rear spoiler. heck the drag boys (real drag boys=pro) should know. THey run 200 all the time. the ferrari f-40 has 492 hp and won't quite go 200. that is my best guess.
 

GTR_Stang03

New Member
Jul 29, 2003
53
0
0
Jul 27, 2005
#58
  • Jul 27, 2005
  • #58
Thanks for all the input Stangers! It all helps. Serious, I want to do it with the engine that came with my car...a 2V SOHC. He did it with a Cobra I am going to do it with a GT and set a goal for 204 mph. My engine only needs to do it once. That is if it survives, I think it will. After I achieve this goal with the 2V I am going to retire the gt motor and put a Ford Racing 5.0 Modular Cammer.

My original motor has been really good to me...It deserves to go out with a BANG at 200+.. Ya think. Besides I am 40 years old with nothing better to do than spend money on my Sonic Blue Gt Beast.

I also want to thank all you Stangers out there for the help and advice you have supplied to all of us.

Remember...Don't Speed......Just Fly Low!
 

Blk05Retro

Member
Mar 31, 2005
99
0
6
Katy, TX
Jul 27, 2005
#59
  • Jul 27, 2005
  • #59
You definitly don't want your engine to blow at 200mph. One small piece of part getting lodged into a tire is going to spell disaster.
 
F

fordrngr

New Member
Apr 29, 2004
25
0
1
Middletown, DE
Jul 28, 2005
#60
  • Jul 28, 2005
  • #60
And on the flats you need to do it twice. Once in each direction to set the record.
 
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Next
First Prev 3 of 7 Next Last
Status
Not open for further replies.

Similar threads

M
4.10 gears = 200,000 miles ?
  • michaelleewebb
  • Apr 1, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
220
SN95 V6 Mustang Tech Apr 2, 2026
michaelleewebb
M
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
137
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
catkiller
C
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
927
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
312
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
403
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?