I've never installed a cam myself....who wants to give me a basic walk-through? I have no problem tearing the engine apart as far as the front end and intake (carbureted car by the way).
I know basically you wanna pull the lifters so they don't fall down through the engine...i need to pull the dampener and crank pully too right?
Basically any pointers beyond that would be helpful. I don't like referring to the stupid Haines manual...i'd rather get advice from guys who've done it a million times. I also have a new timing chain/gear set to go on as well. I won't be going into all the cam degreeing and all that...just lining up the dots should be good enough for my setup.
I know basically you wanna pull the lifters so they don't fall down through the engine...i need to pull the dampener and crank pully too right?
Basically any pointers beyond that would be helpful. I don't like referring to the stupid Haines manual...i'd rather get advice from guys who've done it a million times. I also have a new timing chain/gear set to go on as well. I won't be going into all the cam degreeing and all that...just lining up the dots should be good enough for my setup.