• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help me setup for nitrous, PLEASE!

  • Thread starter Thread starter nidyanazo
  • Start date Start date Nov 1, 2005
N

nidyanazo

Banned
Mar 30, 2005
149
2
0
805 dawg
Nov 1, 2005
#1
  • Nov 1, 2005
  • #1
I want to get the ball rolling with an inexpensive sollution, that will be safe for the motor. First of all, I'm rebuilding right now and putting in KB hyper pistons. I've heard all sorts of claims "they can handle up to a 500HP shot", "they'll blow with a 100 shot".
I figure 75-100 is safe. Going to be pulling timing, running the correct colder plugs, and either 91 or 102 octane. So I dont think I'll run into detonation.
Now I wanted to go with a zex dry kit. "you need 24lb injectors and a calibrated MAF". What? Do I? of should the stock 19lb's be okay? Can I run the stock intank pump? Or should I put in a 255? Do I NEED a adj. fuel pressure regulator and FP gauge? I'm getting frustrated. Can you guys suggest a good setup for me to run? Please?
Thanks.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Nov 1, 2005
#2
  • Nov 1, 2005
  • #2
ttt Interested in a Compucar and a 50-60 shot.
 

Look Its Aaron

Your car looks like it came straight from Mexico.
Founding Member
Nov 18, 2001
2,634
0
48
Fontana, Cali
Nov 1, 2005
#3
  • Nov 1, 2005
  • #3
Most of the things people are saying are for the good of your motor.

I would run a 100 shot with 8* timing. I would also put in a bigger fuel pump, just in case. Same with an AFPR. It's always better to be safe then sorry.

I would still go forged pistons.
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Nov 1, 2005
#4
  • Nov 1, 2005
  • #4
I used a 125 shot on cast pistons,but i dont know if the KB's are stronger,but a good tune is your biggest key.
 

rsw007

New Member
Jul 7, 2004
469
1
0
Lexington,SC
Nov 2, 2005
#5
  • Nov 2, 2005
  • #5
100 or less is fine on any pistons in a 5.0 with a good tune of 11.5 a/f
 
You must log in or register to reply here.

Similar threads

X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
A
Electrical Help Me, Help My Fox ! 1990 Wiring Assistance please ?
  • Anewjer00
  • Jan 8, 2022
  • Fox 5.0 Mustang Tech
Replies
3
Views
1K
Fox 5.0 Mustang Tech Jan 8, 2022
evintho
Engine Help diagnose random overheating??
  • TomOsiris
  • Apr 10, 2022
  • Fox 5.0 Mustang Tech
  • 5 6 7
Replies
122
Views
17K
Fox 5.0 Mustang Tech Jul 3, 2023
General karthief
Progress Thread Akumu No Dara Ra's LSX swap and build Thread! Updated (2/10/22 @ 8:30PM CST)
  • Akumu No Dara Ra
  • Feb 4, 2022
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 6 7 8
Replies
140
Views
17K
1996 - 2004 SN95 Mustang -General/Talk- Jun 17, 2022
Akumu No Dara Ra
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?