High Beam indicator not working...

[TITAN STANG]

Hi to all Stangers outhere. I just bought bought this awesome mustang 2 days ago. I noticed that the high beam indicator does not come on when it s activated either on permanent or on flash to pass mode. Could it be a bulb on the panel or what wlse could it be? I checked the fuse on the fuse panel and it is fine and I tested it so it's all good. Oh yeah the car is a Mustand GT 87

 

[FrdMustangCpe]

on mine i believe it works only on momentary. its either one or the other the light comes on. I would say its the dash light, i believe the bulbs are 194s. You might just want to change all of them while your in there. I changed a few of mine, sure enough one more went out a couple of days later, so i had to take it all apart again. You do not need to remove the whole cluster from the car to change the bulbs. Once to get the cluster unbolted there will be i believe two wire clips and the speedo cable. you should be able to reach your hand and 1/4 turn the little black bulb holders.

 

[TITAN STANG]

What are 194. is that the stock number for them? I need to change those suckers soon. Can I get those on any car Parts store?

 

[FrdMustangCpe]

any auto parts store should have those lights. they are #194 lights. thats a number that i believe any auto bulb maker uses, im not sure on that tho.i just bought some today, they are like $2.50 for 2. most stores can look it up in their computer system if you cant find them.