I need major help!

[01runninhorse]

I have a 01 gt for a donor car, how hard would it be to swap the engine tranny, rear end and other components into a older sn95 stang. I have access to a lift, engine lift, all tools needed for the job, including air tools. Will the brakes and other things swap over? What about the wiring, will the ecu from the 01 swap into the same place. Any help will be greatly appreciated, thanx!

 

[Cobra Jay]

It should be pretty simple to do, unless it's going into a v-6 car. You'll need to do some wiring and I'm almost positive an new k-member and motor mounts will be required. I'm not sure if the one from the 01 with fit in the sn95 or not If you don't get your questions answered on here, go to the local Ford dealer and have them pull you some part #'s and diagrams from the service manuals. If you ask nicely, I'm sure the dealer won't mind help answering those questions for you. Hell, hook them up with lucnh and they might give you a hand doing the swap.

BTW Where at in HI. are you. I was stationed at Kaneohe for 3 years back in 93-96.

 

[twogts4us]

Wrong Post

 

[01runninhorse]

It should be pretty simple to do, unless it's going into a v-6 car. You'll need to do some wiring and I'm almost positive an new k-member and motor mounts will be required. I'm not sure if the one from the 01 with fit in the sn95 or not If you don't get your questions answered on here, go to the local Ford dealer and have them pull you some part #'s and diagrams from the service manuals. If you ask nicely, I'm sure the dealer won't mind help answering those questions for you. Hell, hook them up with lucnh and they might give you a hand doing the swap.

BTW Where at in HI. are you. I was stationed at Kaneohe for 3 years back in 93-96.

Stationed at Hickam