If You Had An O E M In-line Fuel Filter That Sucked....

Noobz347 · Jan 28, 2016

If I just wanted to cut the fuel lines and remove this POS and put something else in its place, what would you recommend?

Simple and effective

Boosted92LX · Jan 28, 2016

Noobz347 said:
If I just wanted to cut the fuel lines and remove this POS and put something else in its place, what would you recommend?

Simple and effective

What do you dislike about the oem?

Noobz347 · Jan 28, 2016

Boosted92LX said:
What do you dislike about the oem?

My biggest dislike is that it's a pain in the butt to replace. The fitting are screw in fitting and it's mounted on the frame rail. They weld themselves with corrosion during a normal change interval.

Boosted92LX · Jan 29, 2016

Noobz347 said:
My biggest dislike is that it's a pain in the butt to replace. The fitting are screw in fitting and it's mounted on the frame rail. They weld themselves with corrosion during a normal change interval.

Ah. I'd recommend picking up a can of nickle anti-sieze then. In that application you'd want to use it lightly enough that it wont get into the fuel stream, but i can guarantee it'll come loose easily next time. We use it on all of our hardware that is prone to corrosion, and it makes the difference between a routine job and a total cat-tastrophy.

Just my .02, I don't think I'd want to cut those lines and scab in hose down there to install an inline.

Mustang5L5 · Jan 29, 2016

Noobz347 said:
My biggest dislike is that it's a pain in the butt to replace. The fitting are screw in fitting and it's mounted on the frame rail. They weld themselves with corrosion during a normal change interval.

How often are you replacing your fuel filters?

Noobz347 · Jan 29, 2016

I usually replace them once a year in the warmer months (sometimes not). Not this year though. It's stuck on there good and I'm finished playing with it.

I will take some satisfaction when I cut this a-hole off put something else on.

Maybe something with a removable filter bowl and replaceable element.

Boosted92LX · Jan 29, 2016

Noobz347 said:
I usually replace them once a year in the warmer months (sometimes not). Not this year though. It's stuck on there good and I'm finished playing with it.

I will take some satisfaction when I cut this a-hole off put something else on.

Maybe something with a removable filter bowl and replaceable element.

I can tell you work on aircraft.. Lol. I could tell to how to get it off if you'd like.. And then you could just use the tech I mentioned and you'd never have problems with it again...

OR, you could be a hammerhead and chop up your fuel system.

Noobz347 · Jan 29, 2016

I gotta tell ya... I can see the potential for the hammerhead route to bring me great satisfaction

Aw hell.... What's your other suggestion?

Edit: This is not a Mustang BTW. This is the type with female threads at each end.

A5literMan · Jan 29, 2016

Why do you change the fuel filter every year? Seems excessive to me
I would try boosted's advise first before chopping away...!?!

Noobz347 · Jan 29, 2016

A5literMan said:
Why do you change the fuel filter every year? Seems excessive to me
I would try boosted's advise first before chopping away...!?!

Ok... the years that I THINK about it?

Boosted92LX · Jan 29, 2016

Noobz347 said:
I gotta tell ya... I can see the potential for the hammerhead route to bring me great satisfaction

Aw hell.... What's your other suggestion?

Edit: This is not a Mustang BTW. This is the type with female threads at each end.

Go find a quality penetrating oil. Kano kroil is the best I've seen. There is also S'OK.. and pb blaster makes one too. Choose them in that order respectively. Hose it down and let the oil creep into the threads. Be patient. If you have time do this a couple days in a row. Then get an object with some mass you can slip behind the hex on the fitting and use as an anvil. Get the heaviest hammer you can swing in there and smack the fittings. You may have to hit each flat all the way around if it's really stuck. This impacts the threads and crushes the corrosion so it will break loose. If you can't get a hammer on it, find a drift or the largest punch you can find to reach it. Remember the more mass your drift has, the more energy it transfers. Hitting it with an 1/8 punch is pointless. Another trick is heat, but you can't use that here. It sounds elementary, and it is... But work it does. We get stuck bolts every day, and cutting them off just isn't an option. Good luck.

Noobz347 · Jan 29, 2016

Seriously, do NOT take this the wrong way but when I read that I said....

Soak it with penetrating oil, use tools that fit, and beat the crap out of it.

Chit man... In the 30 years I've been turning wrenches, that would never have occurred to me.

I can get the thing off but if there's a better setup to be had, I'd prefer to not play this game again. This state uses SALT of the effin roads.

I'm sure someone has come across one that they liked maybe?

Boosted92LX · Jan 29, 2016

Noobz347 said:
Seriously, do NOT take this the wrong way but when I read that I said....

Soak it with penetrating oil, use tools that fit, and beat the crap out of it.

Chit man... In the 30 years I've been turning wrenches, that would never have occurred to me.

I can get the thing off but if there's a better setup to be had, I'd prefer to not play this game again. This state uses SALT of the effin roads.

I'm sure someone has come across one that they liked maybe?

.... and nevrsieze would have prevented the threads from sticking. Just sayin.

Carry on.

srtthis · Jan 29, 2016

im a big fan of the inline -10 with cleanable filters.

Noobz347 · Jan 29, 2016

Boosted92LX said:
.... and nevrsieze would have prevented the threads from sticking. Just sayin.

Carry on.

This, I will probably do if some other thing doesn't come along.

srtthis said:
im a big fan of the inline -10 with cleanable filters.

Something along these lines is more what I had in mind. Have you seen any decent ones with replaceable filters?

jrichker · Jan 29, 2016

Boosted92LX said:
.... and nevrsieze would have prevented the threads from sticking. Just sayin.

Carry on.

After 12 years as an A&P aircraft mechanic, Never-Seeze is my friend....

If You Had An O E M In-line Fuel Filter That Sucked....

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Boosted92LX

It's only an inch or two. What's the big deal?

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Boosted92LX

It's only an inch or two. What's the big deal?

Mustang5L5

That is…until I whipped out my Bissell

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Boosted92LX

It's only an inch or two. What's the big deal?

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

A5literMan

At least it is lumpy...

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Boosted92LX

It's only an inch or two. What's the big deal?

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Boosted92LX

It's only an inch or two. What's the big deal?

srtthis

the guy doing it does every local racers rear end

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

jrichker

StangNet's favorite TOOL

Similar threads

If You Had An O E M In-line Fuel Filter That Sucked....

Stangnet Facilities Maint Tech... Er... Janitor

It's only an inch or two. What's the big deal?

Stangnet Facilities Maint Tech... Er... Janitor

It's only an inch or two. What's the big deal?

That is…until I whipped out my Bissell

Stangnet Facilities Maint Tech... Er... Janitor

It's only an inch or two. What's the big deal?

Stangnet Facilities Maint Tech... Er... Janitor

At least it is lumpy...

Stangnet Facilities Maint Tech... Er... Janitor

It's only an inch or two. What's the big deal?

Stangnet Facilities Maint Tech... Er... Janitor

It's only an inch or two. What's the big deal?

the guy doing it does every local racers rear end

Stangnet Facilities Maint Tech... Er... Janitor

StangNet's favorite TOOL

Similar threads

Privacy & Transparency

Privacy & Transparency