Injector size

BigE37172

New Member
Dec 31, 1969
27
0
1
Im sure with all other ? out there this one has been beat to death but I've obtained some injectors from a 88 ford f-450 with a 460 in it and i was wondering how to tell what size they are? I read a thread in the past that said you could possibly find some 24# injectors in the 460 motors. If thats true than I may have stumbled upon some for free.
 
Diagram courtesy of Tmoss & Stang&2birds
Ford_Injector_Guide.webp



See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 86-95 5.0 Mustang wiring Mustang FAQ - Engine Information Everyone should bookmark this site.

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 5.0 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 91-93 5.0 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/91-93_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 94-95 5.0 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/94-95_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pinout
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif

Fuse box layout
http://www.veryuseful.com/mustang/tech/engine/images/MustangFuseBox.gif
 
Without the part number it's impossible to know what they are. My 5.0 has injectors that look like the black Cobras above but they never came in a Ford. Corvette as a matter of fact. SLP was clearing them out a few years ago. $99 for 8. I snapped a set up and put them on the shelf until I needed them.

The point is.... You never know what you're going to find when it comes to injectors.