• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Injectors?

  • Thread starter Thread starter Detroiit
  • Start date Start date Jul 20, 2014
Prev
  • 1
  • 2
  • 3
  • 4
First Prev 4 of 4

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 22, 2014
#61
  • Jul 22, 2014
  • #61
madspeed said:
Its the internet...you ask a question and everyone has their opinion. There are definitely some proven combos out there, and either 42's or 60's will be fine with a vortech blown stock block.

/thread
Click to expand...
best advice i've hear all day..
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 22, 2014
#62
  • Jul 22, 2014
  • #62
2000xp8 said:
Not sure it helps that you have responses from all the most outspoken members, lol.

Tuning, meters, injectors is always kinda a hot topic.
One that we all don't necessarily agree on.
But I think everyone's preferred method works.
Which is best for you? That's on you.

I tend to err on the side of caution and i like the simplicity route that doesn't require any tuning or special software at all. Also doesn't require any parts to be installed at the shop, such as the meter and by far is the cheapest.

The 60's route is just too complex for my taste, and judging by the fact that we probably have less than 5 active member with a dart (or equivalent) block, i'd say the "room to grow" theory is pointless.
Click to expand...
point taken
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,913
1,332
204
a van down by the river
Jul 22, 2014
#63
  • Jul 22, 2014
  • #63
2000xp8 said:
Not sure it helps that you have responses from all the most outspoken members, lol.

Tuning, meters, injectors is always kinda a hot topic.
One that we all don't necessarily agree on.
But I think everyone's preferred method works.
Which is best for you? That's on you.

I tend to err on the side of caution and i like the simplicity route that doesn't require any tuning or special software at all. Also doesn't require any parts to be installed at the shop, such as the meter and by far is the cheapest. I'm very much a less is more guy and i like to put money where it counts the most.

The 60's route is just too complex for my taste, and judging by the fact that we probably have less than 5 active member with a dart or race block (majority of which are race cars) , i'd say the "room to grow" theory is pointless.
Click to expand...


Theres alot more Dart blocks hiding in here than I think both of us are aware of
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 22, 2014
#64
  • Jul 22, 2014
  • #64
So aside from the "extra money" 60# injectors will work "great" on a 400 hp car?.. you all have me thinking I should of ignored Lidio's recommendations.. lol

Lidio made it sound like he didnt want me to come up to him and tune my car and be choked out by the fuel.. In all honesty I really dont know what works.
 
Last edited: Jul 22, 2014

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jul 23, 2014
#65
  • Jul 23, 2014
  • #65
Noobz347 said:
Dude... don't get so butt hurt. It's a forum! There's nobody here that ISN'T trying to help you.

Look at the statistics for some of these guys! They KNOW what they're talking about.
Click to expand...

I'm here for the beer and women.. wait a minute.............. damn
 

jchav02

Active Member
Apr 17, 2010
116
29
49
Jul 23, 2014
#66
  • Jul 23, 2014
  • #66
FWIW I'm running seimens deka 80 lbers w/ lightning mass on a h/c/i car tuned by me with a quarter horse. Runs exactly the same as the 24s I was running. Afr is 14.7 at idle and 13.0 at wot. No driveablity issues what do ever. The 24s were the worst $300 I've spent on my car. The 80's were $330 they work with my very mild combo currently, they'll work when I install my t trim in few months, and they'll work when I eventually have a dart block/ trim combo.
 
Last edited: Jul 23, 2014

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,500
8,753
234
S.I.NY
Jul 23, 2014
#67
  • Jul 23, 2014
  • #67
While i agree with the 60s . I don't agree with the meter. The pro-m has proven time and time again to get the job done. To go crazy making that walboro fit just seems a bit silly to me when the aeromotive drops right in and many of us are using it with no issue. Again i am just giving my opinion here.

I got my 42s new in the box from a friend for a silly silly price so thats why i have them . The future for me is unknown so if i need a 60 unlike you ill have to cross that bridge. But with those 60s would be an r block or dart and about 13-16# going through it and i am not quite there.
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 23, 2014
#68
  • Jul 23, 2014
  • #68
TOOLOW91 said:
While i agree with the 60s . I don't agree with the meter. The pro-m has proven time and time again to get the job done. To go crazy making that walboro fit just seems a bit silly to me when the aeromotive drops right in and many of us are using it with no issue. Again i am just giving my opinion here.

I got my 42s new in the box from a friend for a silly silly price so thats why i have them . The future for me is unknown so if i need a 60 unlike you ill have to cross that bridge. But with those 60s would be an r block or dart and about 13-16# going through it and i am not quite there.
Click to expand...
I know the 42's would probably the only injectors I will ever need.. But .. Live and learn.. Its not going to make my 400+hp car go slower hopefully with 60#ers..
 
Reactions: TOOLOW91

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,500
8,753
234
S.I.NY
Jul 23, 2014
#69
  • Jul 23, 2014
  • #69
Detroiit said:
I know the 42's would probably the only injectors I will ever need.. But .. Live and learn.. Its not going to make my 400+hp car go slower hopefully with 60#ers..
Click to expand...
No it won't it will lower the duty cycle of the injector leaving you
more room on the table
 

stangr5oh

Active Member
Dec 13, 2004
207
19
28
Patroling in my candy van - you want some candy?
Jul 24, 2014
#70
  • Jul 24, 2014
  • #70
This is my opinion only, but I have read this whole thread just now and I see only one pattern. The OP has been talking to a shop owner and that shop owner has filled his head with answers that makes a brain marvel at night in the sleeping hours. But the guys on here keep suggesting otherwise, to go a different route because of experience, what really works. But the OP keeps saying he is looking for advise and suggestions, but not once have I read any advise taken from the forum by him. OP keeps saying Lidio this Lidio that, I do not understand why make this thread.

I do hope the best for you and hope all goes well, but again this is my opinion only, take experience on this forum for all its worth and start listening to some on here, and not so much from Lidio. Your car is going to get tuned regardless of what is on that car of yours. He is in the business of making money. If Lidio is only supplying you with a tune, then leave it at that and not Lidio as a suggestion box per say. Leave the suggestion box to this forum. No matter what you do in the future, Lidio will always be there to tune your car and he will do the best job he can, I would bet the bank on it. But when it comes to this forum and posting a build thread and you asking for suggestions, then take them and run with it. I feel it to be an insult when someone asks for suggestions, feedback, and advise then turns around and does the opposite because someone else not on this forum told him it is best. Makes no sense to spend time typing in that case.

Good luck to you once again, I will be reading as you continue your build. The best to you and please don't take this as a negative, but my opinion.
 
Reactions: elarm1 and TOOLOW91

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Jul 24, 2014
#71
  • Jul 24, 2014
  • #71
42's... no 60's....
Either will work, you're getting it tuned anyway. For reasons stated before by others I'm in the 42lb court but that is just my opinion. At the end of the day the 60's that you ordered will get the job done. If we can get my car to idle perfectly with 235lb injectors then your 60's will not be an issue. Time to lock this thread down

Who knows how cool it isn't to run an injector at 100% duty cycle? I do....

 
Reactions: TOOLOW91

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 24, 2014
#72
  • Jul 24, 2014
  • #72
stangr5oh said:
This is my opinion only, but I have read this whole thread just now and I see only one pattern. The OP has been talking to a shop owner and that shop owner has filled his head with answers that makes a brain marvel at night in the sleeping hours. But the guys on here keep suggesting otherwise, to go a different route because of experience, what really works. But the OP keeps saying he is looking for advise and suggestions, but not once have I read any advise taken from the forum by him. OP keeps saying Lidio this Lidio that, I do not understand why make this thread.

I do hope the best for you and hope all goes well, but again this is my opinion only, take experience on this forum for all its worth and start listening to some on here, and not so much from Lidio. Your car is going to get tuned regardless of what is on that car of yours. He is in the business of making money. If Lidio is only supplying you with a tune, then leave it at that and not Lidio as a suggestion box per say. Leave the suggestion box to this forum. No matter what you do in the future, Lidio will always be there to tune your car and he will do the best job he can, I would bet the bank on it. But when it comes to this forum and posting a build thread and you asking for suggestions, then take them and run with it. I feel it to be an insult when someone asks for suggestions, feedback, and advise then turns around and does the opposite because someone else not on this forum told him it is best. Makes no sense to spend time typing in that case.

Good luck to you once again, I will be reading as you continue your build. The best to you and please don't take this as a negative, but my opinion.
Click to expand...
Point well taken. Its not that im disregarding people's advice on this forum or thinking Lido's word is king. In the end I think I made a very informed decision. Obviously its not what most of you would do but thats ok.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,500
8,753
234
S.I.NY
Jul 24, 2014
#73
  • Jul 24, 2014
  • #73
Is he doing an sct chip to tune the car ? Just wondering I think it's time to start a progress thread being that mine is slow now we can hang out in yours lol
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 24, 2014
#74
  • Jul 24, 2014
  • #74
stangr5oh said:
This is my opinion only, but I have read this whole thread just now and I see only one pattern. The OP has been talking to a shop owner and that shop owner has filled his head with answers that makes a brain marvel at night in the sleeping hours. But the guys on here keep suggesting otherwise, to go a different route because of experience, what really works. But the OP keeps saying he is looking for advise and suggestions, but not once have I read any advise taken from the forum by him. OP keeps saying Lidio this Lidio that, I do not understand why make this thread.

I do hope the best for you and hope all goes well, but again this is my opinion only, take experience on this forum for all its worth and start listening to some on here, and not so much from Lidio. Your car is going to get tuned regardless of what is on that car of yours. He is in the business of making money. If Lidio is only supplying you with a tune, then leave it at that and not Lidio as a suggestion box per say. Leave the suggestion box to this forum. No matter what you do in the future, Lidio will always be there to tune your car and he will do the best job he can, I would bet the bank on it. But when it comes to this forum and posting a build thread and you asking for suggestions, then take them and run with it. I feel it to be an insult when someone asks for suggestions, feedback, and advise then turns around and does the opposite because someone else not on this forum told him it is best. Makes no sense to spend time typing in that case.

Good luck to you once again, I will be reading as you continue your build. The best to you and please don't take this as a negative, but my opinion.
Click to expand...
FWIW I have talked to many people. Brother in law had a 92 notch with a supercharger, other brother in law with a 93 notch running 9.18's, Tom Craft ( performance guru with a fox body running 10.40 on blower), and I did speak to Justin at Walsh Motosports. So while I have indeed spoke to many individual's on this matter, I have taken into account all of there experience and all of these ppl on this forum's to make my choice. Sure 42#s with 340 lph with pro m 80 is what most guys are doing with great results. That dont mean I cant build my car and have great results too..
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jul 24, 2014
#75
  • Jul 24, 2014
  • #75
TOOLOW91 said:
Is he doing an sct chip to tune the car ? Just wondering I think it's time to start a progress thread being that mine is slow now we can hang out in yours lol
Click to expand...
This is a quote from him" When getting a custom computer tune to accompany the install -- will end up on our in house DynoJet Chassis dyno to insure that Air-Fuel, spark, idle quality and countless other parameters are where they’re supposed to be to insure that the entire package is behaving correctly under all normal street driving and “spirited” driving conditions."
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,500
8,753
234
S.I.NY
Jul 24, 2014
#76
  • Jul 24, 2014
  • #76
Detroiit said:
This is a quote from him" When getting a custom computer tune to accompany the install -- will end up on our in house DynoJet Chassis dyno to insure that Air-Fuel, spark, idle quality and countless other parameters are where they’re supposed to be to insure that the entire package is behaving correctly under all normal street driving and “spirited” driving conditions."
Click to expand...
I guess he's using an sct and your gonna need a BTM to pull timing under boost as well .
 
Prev
  • 1
  • 2
  • 3
  • 4
First Prev 4 of 4
You must log in or register to reply here.

Similar threads

Fuel SN95.0 fuel system
  • RedFury5.0
  • Apr 22, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
346
Fox 5.0 Mustang Tech Apr 22, 2025
AeroCoupe
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
195
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
11K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?