Is This Good?????

Dan

I'm gonna guess that since the size is 73mm, your talking about a C&L maf.

You will see that some have probs with using a C&L maf and many do not have any issues whatsoever.

A nice thing about the C&L is that they use a sample tube of various sizes that is used to work with different size injectors.

My first choice would be a ProM 80mm maf. Their 77mm maf is just as accurate but since it is made from Aluminum and the 80mm is made from plastic, the 77mm will cost you a bit more.

The ProM mafs use electronics that are set up to work with a specific size injector and if you need to change the inj size, you gotta send the maf back to ProM for what they call a recal.

Later
Grady

I would go with the Pro-M. I think its a more stable MAF. 80mm is a good one.

Might find it hard trying to find a PRO-M 80MM though. They were cheap for awhile now they are jacked up again b/c of the limited stock left. I got my 80MM off the classifides from www.turbomustangs.com for $225 shipped. I had a C&L before and I never really had any probs w/ it but I knew it would be alot easyer trying to dyno tune/chip my car w/ the PRO-M then the C&L espeicaly w/ the 94/95 picky computers.