The Linley boys are at it again! This time around they have a 2013 GHIG (Gotta Have It Green) Mustang GT on the dyno. This is their HPDE prepped car which features several great parts that make this car super capable on track. From the Boss 302 intake manifold, PMAS cold air intake, and Lund Racing tune, this high-mileage gen 1 Coyote is ready to rip!
*Dyno Information*
- Gen 1 Mustang GT Engine w/ ~121k miles
- Boss 302 Intake Manifold
- PMAS Cold Air Intake
- JBA Shorty Headers w/ Free-flowing X-pipe (Dyno use only)
- Resonator Delete
- Ford 13-14 GT500 Quad Tip Muffler
- MT82 Transmission (5th gear pull is 1:1, but the car was pulled in 4th due to rear gear ratio)
- Aluminum Driveshaft
- 3.31 Rear Gear
- 19" SVE R357 Wheels w/ 285/35/19 Tires
- Lund Racing Tune
- 93 Octane Fuel
In this video, Landan talks about some key points on how to run a 10.5" +24mm front wheel on a 2015-2025 S550 or S650 Mustang. As enthusiasts, we always seem to chase things obscure things just because we can. The info covered in this video will help S550 and S650 Mustang owners understand what it takes to run a 19x10.5” wheel +24mm offset wheel.
In this video, Jude explains the easy process of removing the door panel from a S197 2010-2014 Ford Mustang. Simply reverse the removal steps to install the door panel.
In this video, Jude explains how to adjust/aim the headlights on a 2010-2014 S197 Ford Mustang. This process works for both non-HID and HID equipped Mustangs.
*Vehicle Fitment*
Chassis: S197 Ford Mustang
Year Range: 2010, 2011, 2012, 2013, 2014
*Tool List*
Phillips head screwdriver or 7mm Allen wrench
Tape
Tape Measure
Flat Ground
Wall
*Chapters*
00:00 - Video intro & explanation.
00:58 - Measure the height of the headlight.
01:48 - How to adjust the headlights.
03:45 - Final thoughts & outro.
If you have an oil leak from your gen 1 or gen 2 Coyote engine valve covers, this video is for you. Landan explains the TSB, removes the OEM valve covers, and installs a new set of GT500 valve covers.
*TSB 19-2309 Info*
Some 2015-2017 Mustang vehicles equipped with a 5.0L engine may exhibit an oil leak from either valve cover gasket. This may be due to the valve covers warping due to excessive heat. To correct the condition, follow the Service Procedure steps to add fasteners to both valve covers.
Here is another track day outing with the HPDE-prepped competition orange 2015 Mustang GT. This took place at the Mustang Club of America (MCA) Ponies in the Ozarks National Show at Ozarks International Raceway located in Gravois Mills, Missouri.