• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Long Tubes a waste on N/A cars.

  • Thread starter Thread starter MustangLife
  • Start date Start date Feb 25, 2004
Status
Not open for further replies.
  • 1
  • 2
  • 3
  • …
  • 8
Next
1 of 8 Next Last
M

MustangLife

Active Member
Jan 5, 2003
1,285
0
36
Chattanooga, TN
Feb 25, 2004
#1
  • Feb 25, 2004
  • #1
I've been on this board for awhile now. I've done alot of researching and looking at numerous peoples dyno sheets. There a ton of people on this forum and on others with long tubes claiming gains of 15-25 rwhp from long tubes alone. Come on. You can look at plenty of peoples mods list and dyno sheets putting the same hp to ground to the ground with couple bolt ons, off-road x-pipe, cat-back as the ones with the long tubes and off-raod xpipe and cat-back.

The 80% of the gains people are seeing are from off-road x-pipe and off-road h-pipe.

Now you got a guy that just put long tubes, x-pipe and flows on his car he gets a dyno of 260rwhp, hes excited. So sinceh esp ut the money on the long tubes and the labor he thinks to himself, he spent alot of money it was worth it. But what the guy doesn't know, that is if he had a off-road x-pipe, cat-back and put the stock shorties back, there probaly won't be but at the most 5rwhp difference.

I'm making this post, casue there basically is a daily thread on mac long tubes, hooker long tube, and bbk long tubes. Unless your blown, don't waste the $500 on labor for the long tubes, and the $350-$700 for the Headers themselves.

Josh
 

mogs01gt

Founding Member
Jul 22, 2002
3,113
30
119
Ohio
Feb 25, 2004
#2
  • Feb 25, 2004
  • #2
You trap 80-81 in the 1/8 mile. I trap 83-84. You have 4.10s, I have 3.90s.
I think long tubes are worth it.

Go read the newest MM&FF and most of the fast modulars in that article have Mac Long Tubes. I go on what performs, not what people say.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Feb 25, 2004
#3
  • Feb 25, 2004
  • #3
Keep giving out tech then

Ever heard of a power curve or just peak numbers?

Yet again Mustang life giving bad advice
 

mogs01gt

Founding Member
Jul 22, 2002
3,113
30
119
Ohio
Feb 25, 2004
#4
  • Feb 25, 2004
  • #4
Jackie Chan said:
Keep giving out tech then

Ever heard of a power curve or just peak numbers?

Yet again Mustang life giving bad advice
Click to expand...

and we will keep correcting him. There is always bad advice given out. I probably have said 'Kiss Me''Kiss Me''Kiss Me''Kiss Me' plenty of times that I was wrong about.

Nick
 
6

68 & 00 GT

New Member
May 14, 2003
2,407
1
0
HOUSTON TEXAS
Feb 25, 2004
#5
  • Feb 25, 2004
  • #5
what ignorance.

I'm telling you I picked up 18 RWHP over a catted Magnaflow X by adding my longtubes, and the off road X. There's only 2-3 RWHP difference in cats vs. no cats in a N/A car. My car pulled alot stronger by adding LT's I promise. And the sound oh
See my sig for a video clip -
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Feb 25, 2004
#6
  • Feb 25, 2004
  • #6
my .02 , they were the best $$$ spent on my car , the power increase was amazing from idle all the way to redline , If you play on doing a blower or nitrous its well worth it , the sound is amazing too, If I had only known they were going to be that worthwhile i would have done them before i put the K&N in and everybody does the k&n first LOL . if you dont have much money to spend on them , buy the macs because they are the cheapest , spend a weekend and install them yourself , its time consuming but not impossible at all , get them and you will see what the hype is about when you step on the gas .
 

nickthegenius

Active Member
Dec 23, 2002
1,631
1
38
Elwood, IN
Feb 25, 2004
#7
  • Feb 25, 2004
  • #7
I guess thats why all the guys that are hitting 11's or low 12's are running longtubes. KenB, Mustang92, Starkie, etc. Too bad you didn't tell them before they installed them, they could have saved some money.

Reminds me of KirkyG and his centrifugal bashing and misinformation. These two should go to Hawaii or Massachusettes (sp?) and get married, they're a match made in heaven.
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Feb 25, 2004
#8
  • Feb 25, 2004
  • #8
well i picked up 10rwhp & 7 rwtq, on my 98 with just the longtubes. i already had everything else done & they were the last thing done. & it needed tuned baaaaad. running super rich

& i tell ya what, now that i have my longtubes on my 03, i'll let you know how much hp i gained from them. as soon as my shop fixes their dyno, it will be on there. the air brake is messed up & i dont feel like buying a new set of rear pads, just for a dyno pull i already had my stock baseline taken, so we can get a rough estimate to go by. & i'm sure they are going to be shown to be well worth it
 
C

CottonBurnerz

Banned
May 10, 2003
1,554
0
0
Drink and Drive = Teh Lose
Feb 25, 2004
#9
  • Feb 25, 2004
  • #9
If you're talking about PEAK hp then the LT + X/H pipe vs. stock manifold + X/H pipe are not really that far apart.. but the LT will give you a hell lot more increase on low end and all the way through the curve.. vs. just putting on the X/H pipe in alone..
 
C

CottonBurnerz

Banned
May 10, 2003
1,554
0
0
Drink and Drive = Teh Lose
Feb 25, 2004
#10
  • Feb 25, 2004
  • #10
c2see21 said:
well i picked up 10rwhp & 7 rwtq, on my 98 with just the longtubes. i already had everything else done & they were the last thing done. & it needed tuned baaaaad. running super rich

& i tell ya what, now that i have my longtubes on my 03, i'll let you know how much hp i gained from them. as soon as my shop fixes their dyno, it will be on there. the air brake is messed up & i dont feel like buying a new set of rear pads, just for a dyno pull i already had my stock baseline taken, so we can get a rough estimate to go by. & i'm sure they are going to be shown to be well worth it
Click to expand...

any updates on the filter test?
 
S

Silverpony00

Founding Member
Sep 12, 2001
188
0
0
Houston, Tx
Feb 25, 2004
#11
  • Feb 25, 2004
  • #11
I think he is just mad cause he cant get the longtubes or something. The sound alone is worth the money. Who wouldnt want to pick up 2+ mph in the quarter mile? Being an automatic a noticed a HUGE difference in the upper rpms. Feels like I picked up 15+ rwhp easily not to mention the low end I picked up.
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Feb 25, 2004
#12
  • Feb 25, 2004
  • #12
CottonBurnerz said:
any updates on the filter test?
Click to expand...


not yet the day before i went down, they roasted off the rear brakes on a mach 1 so i decided i could wait until they got the air brake fixed hopefully before the end of this week it will be fixed, & as soon as its fixed i'll go back & do the tests
 

AJ99MustangGT

Member
Mar 27, 2003
218
0
17
Fenway Park
Feb 25, 2004
#13
  • Feb 25, 2004
  • #13
Jackie Chan said:
Keep giving out tech then

Ever heard of a power curve or just peak numbers?

Yet again Mustang life giving bad advice
Click to expand...

agreed... drive a stang with just an off road x and cat back, and then drive one with longtubes, and you can feel the difference. Thats all i need.
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Feb 25, 2004
#14
  • Feb 25, 2004
  • #14
I heard cams dont work either.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Feb 25, 2004
#15
  • Feb 25, 2004
  • #15
gears
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Feb 25, 2004
#16
  • Feb 25, 2004
  • #16
Obviously spoken from a person with no experience with Longtubes. I dont even know how many times I've posted dyno sheets with just the addition of Lt's and prochamber which should 26rwhp & 30+rwtq gain. Hmmm, guess I got a special type of prochamber that was able to help me gain 24rwhp & 28+rwtq . That's not even getting into the area under the curve in which was a considerable difference between the two. Guess you should prob do a little more research before you offer up this type of advice.
 

WHT00GT

New Member
Sep 30, 2003
34
0
0
Va Beach
Feb 25, 2004
#17
  • Feb 25, 2004
  • #17
amatures.... like everyone else said, until you thrash it, don't bash it... that probably sounded stupid, but at the time, it felt right...
 

WHT00GT

New Member
Sep 30, 2003
34
0
0
Va Beach
Feb 25, 2004
#18
  • Feb 25, 2004
  • #18
oh, did i mention that i got all of my 310 N/A RWHP from a CAI and some u/d pullies? some people kill me
 

starkie

New Member
Mar 20, 2002
1,234
0
0
South Jersey
Feb 25, 2004
#19
  • Feb 25, 2004
  • #19
Maybe somebody should learn how to read a dyno graph before they go bashing LT headers.....

And the 2 tenths of a second and 1 mph in the 1/4 mile improvement I got was all in my head.

Long tubes headers are just plain awesome.

Starkie
 

JonJon

Founding Member
Aug 16, 2002
4,801
1
68
back in Marylands
Feb 25, 2004
#20
  • Feb 25, 2004
  • #20
68 & 00 GT said:
what ignorance.

I'm telling you I picked up 18 RWHP over a catted Magnaflow X by adding my longtubes, and the off road X. There's only 2-3 RWHP difference in cats vs. no cats in a N/A car. My car pulled alot stronger by adding LT's I promise. And the sound oh
See my sig for a video clip -
Click to expand...
 
  • 1
  • 2
  • 3
  • …
  • 8
Next
1 of 8 Next Last
Status
Not open for further replies.

Similar threads

Fox 329 HP low for a stroker?
  • Andresquintana.mma
  • Apr 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 19, 2025
Jarhead67
J
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
954
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
522
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
210
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?