• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

LOUDEST MUFFLER/NOT DEEP

  • Thread starter Thread starter stang2841
  • Start date Start date Dec 3, 2004
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Dec 4, 2004
#41
  • Dec 4, 2004
  • #41
OrLackThereof said:
I've got Spintech Pro Streets. I found their website online...ordered easily over the phone...they came promptly. However, it sounded SWEET for a few weeks...now it just sounds like ass at cruise. Nothing is loose inside....doesn't seem like a baffle broke..but I don't know. The sound changed entirely in the 2000-3500 rpm range.

It sounds WICKED at idle though...like ungodly. I've had a few people ask me about it....sounds very dragster-like. Deep, flat, loud, and slightly metallic....and when you really rev it up, it sounds UNREAL. When I first got them on I romped it twice through a residential neighborhood......my mistake....and I had neighbors actually RUN outside their houses cursing at me threatening to call the cops.

My only complaint is for just cruising around, it sounds ****ty in the drone-range... Real burbly and metallic and raspy. But in the high revs....it's like nothing you've heard before.
Click to expand...

What brand of x pipe do you have?
 
S

stang2841

New Member
Jun 12, 2004
708
0
0
palm harbor florida
Dec 4, 2004
#42
  • Dec 4, 2004
  • #42
sad enough I'm one of the fastest in town...


and known for being fast? its wierd I go to a soft highschool I guess and Honestly I hate the sound of the flowmasters so I think I'm going prostreets
 
O

OrLackThereof

New Member
Mar 9, 2003
560
0
0
Palm Bay, FL
Dec 4, 2004
#43
  • Dec 4, 2004
  • #43
nmcgrawj said:
What brand of x pipe do you have?
Click to expand...

I'd tell you but I didn't put it in... Previous owner installed it, I've never removed it to be able to read the plate welded onto it.

I can say this much...it's a very clear and definited, smooth X....not like most X pipes I see...it's a smoother curve, more true to shape. And across the center joint it's got a square plate on it. But that's all I can see from underneath.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Dec 5, 2004
#44
  • Dec 5, 2004
  • #44
The only problem your going to run into with the spintechs and it was mentioned above is that this will sound almost identical to the flows at cruising speeds. They have the same type of baffle construction as flows, which in turn leads to very similar sound characteristics. Another vote for the magnopacks right here. They are the sickest sounding muffler at WOT but they have an awesome tone at idle and just crusing. good luck man
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Dec 5, 2004
#45
  • Dec 5, 2004
  • #45
ninety15.0 said:
The only problem your going to run into with the spintechs and it was mentioned above is that this will sound almost identical to the flows at cruising speeds. They have the same type of baffle construction as flows, which in turn leads to very similar sound characteristics. Another vote for the magnopacks right here. They are the sickest sounding muffler at WOT but they have an awesome tone at idle and just crusing. good luck man
Click to expand...


You are joking right? I could see if you said Mac and Flows....but spintech? LOL I guess these cut aways look indentical huh?





They look pretty different if you ask me
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Dec 5, 2004
#46
  • Dec 5, 2004
  • #46
I really like the Dynomax magnum glasspacks i have now...they came with the car and im not really a fan of glasspack buts they scream like hell at WOT, and burble like it has a really big cam at idle. It DOES give me headaches if i drive for more than an hour straight, but it might be my subs doing that.
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Dec 5, 2004
#47
  • Dec 5, 2004
  • #47
Youre not gonna get better than Spintechs. They sound great that CJ stang run movie hits it right. I have them on my 351 Windsor it sounds a lot like that video except deeper. I have it in conjunction with a Dr. Gas X-pipe and Hooker Headers. It Idles mean just like in that vid. Makes it sound like a raspy H-pipe even though I have an X-pipe. And when you give it some R's. Those things wind up loud cause of the X-pipe. Very unique sound too. I've never heard any negative things about them except that they are too loud. I have a vid but my dad is too lazy to show me how to get it off the Camcorder.
 

boomshack

New Member
Jun 4, 2004
274
0
0
Southern Cali
Dec 7, 2004
#48
  • Dec 7, 2004
  • #48
Another vote for Spintech Prostreets...they're loud and I love them..although now that I'm used to the sound, I think they could be louder...but that's not the mufflers, that's the factory cats.

Why is it that whenever someone on this post says they're tired of their Flows, there's always someone else popping up saying that Flows are the "end all be all" of mufflers and that replacing them would be a big mistake...I mean c'mon people, Flows sound good but there are other companies out there that make mufflers...plus it's a real shame how much these flows rust...although they have introduced stainless recently.

And the glasspack cherry bombs sound sweet as hell on some hot rods at the local Bobs Big Boy on Friday nights so I'd love to hear that setup on an O/R pipe.
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Dec 7, 2004
#49
  • Dec 7, 2004
  • #49
306 with Unequal shorties, prochamber, Dynomax Bullets dumped

catted X-pipe, dynomax bullets with tail pipes

catted X-pipe, dynomax bullets with tail pipes
 
J

Jason@AFR

Member
Aug 9, 2004
58
0
6
California
Dec 8, 2004
#50
  • Dec 8, 2004
  • #50
Just my .02, I have an off-road H-pipe and sadly enough....summit 2-chambers. They are officially bad-ass, even with off-set inlet and outlet I can still see through them, I started the car without the cat back, then with....immediately laughed because there was no difference. VERY loud, a little deep, not ricey, can set off car alarms with the dumps at idle. But with piping out of the back, or now (w/dumps) at full throttle they just absolutely scream, most people wont race me, I have been told it is very intimidating, if only they knew the reality . This is on my mostly stock 4.6L, so with a more modified larger motor, probably more bad-ass .
 

fly4spd

New Member
Jan 20, 2004
118
0
0
Las Vegas & Reno
Dec 8, 2004
#51
  • Dec 8, 2004
  • #51
just keep in mind that it's the loud one that the police hear, see, pullover, and ticket.
 
S

smallstang393

Member
Oct 18, 2004
75
0
6
Dec 8, 2004
#52
  • Dec 8, 2004
  • #52
91coop said:
Cherry bombs? omg, go home buddy. that the sickest thing ive ever heard. First of all stick with flowmasters, there the best **** out there. Run an h-pipe take off your RESTRICTING cats and get a pair of original 40 series. TRUST me THEY'LL SOUND HORNY!
Click to expand...
flowmaster is one of the worst mufflers on the market to put on a mustang super turbo's out flow them pick some thing else

i put a set of dynomax bullets with tail's on mine one time and you could here it about a mile away (took the of because they were just to loud)
 
O

OrLackThereof

New Member
Mar 9, 2003
560
0
0
Palm Bay, FL
Dec 8, 2004
#53
  • Dec 8, 2004
  • #53
I LOVED the sound of my car open-X...but I lost MAJOR power.

I wonder how it would run/sound running straight-pipe off the X..but reducing it to 2 or 2 1/4 inch, with turndowns...
 
S

stang619

New Member
Sep 6, 2004
69
0
0
Dec 9, 2004
#54
  • Dec 9, 2004
  • #54
OrLackThereof said:
I LOVED the sound of my car open-X...but I lost MAJOR power.

I wonder how it would run/sound running straight-pipe off the X..but reducing it to 2 or 2 1/4 inch, with turndowns...
Click to expand...
had the same effect with warlock bypass muffler..... sounded like *****, way too loud , kinda like a tractor Total bust too.
 

PNY PWR

New Member
Jul 23, 2004
522
0
0
Wichita, KS
Dec 9, 2004
#55
  • Dec 9, 2004
  • #55
flowmaster is one of the worst mufflers on the market to put on a mustang
Click to expand...

That's the most rediculous statement ever made on here.
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Dec 9, 2004
#56
  • Dec 9, 2004
  • #56
PNY PWR said:
That's the most rediculous statement ever made on here.
Click to expand...


I don't know about that...i've read quite a few on this site,lol.
 

PNY PWR

New Member
Jul 23, 2004
522
0
0
Wichita, KS
Dec 9, 2004
#57
  • Dec 9, 2004
  • #57
NoSlo90 said:
I don't know about that...i've read quite a few on this site,lol.
Click to expand...

I think it's just because people are tired of Flowmasters on Mustangs. In my book they still sound the best, classic 5.0 sound. They'll flow plenty for what HP most of us on here are pushing. If they do flow bad (which I extremely doubt) most of us need the back pressure. Alot of peple on here also have the misconception that they need the most open exhaust they can get. Truth is they aren't even close to needed that much flow and will hurt they're performance.

Flowmaster also makes race mufflers for higher HP applications. I just think a statement like that about a truely good product like Flowmaster is uncalled for and misinformed.
 

SilverFox90

New Member
May 11, 2004
80
0
0
central, IL
Dec 9, 2004
#58
  • Dec 9, 2004
  • #58
i have nothing against flows, i just am tired of hearin them on every mustang around here so i wanted somethin diff
 

johnt785

Member
Jan 22, 2004
158
3
18
Wichita, Kansas
Dec 9, 2004
#59
  • Dec 9, 2004
  • #59
If you want something loud and cheap then go with glass packs. Sounds like that something you're looking for. And the bright side of it that their so cheap and you decide that you don't want them then you've wasted like 50-100 and you can try a muffler instead. No biggie
 

PNY PWR

New Member
Jul 23, 2004
522
0
0
Wichita, KS
Dec 9, 2004
#60
  • Dec 9, 2004
  • #60
SilverFox90 said:
i have nothing against flows, i just am tired of hearin them on every mustang around here so i wanted somethin diff
Click to expand...

I can respect that
 
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last
You must log in or register to reply here.

Similar threads

Quieter Mufflers for Supercharged 5.0
  • oz
  • Jun 24, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 14, 2024
2000xp8
D
2008 Bullitt take-off parts (muffs & shaft)... recycle or resell?
  • D-Tex
  • Nov 3, 2024
  • What is it Worth?!?!?
Replies
4
Views
351
What is it Worth?!?!? Nov 3, 2024
D-Tex
D
T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
605
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
504
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?