lol no way stupid. wow big 17. Mommy gonna let you stay out past 10 now?grey5.0beast said:umm... I probably have more experience with cars than you. I turn 17 in 6 days and I have had my license for 11 months. You are one immature ass 31 yr old.
Just too ashamed to admit you were outsmarted by a 16 yr old... not all of us have rice boxes.
DMAN302 said:The rebuild kit is correct to get the tracloc back in action. When the gears are about to go in make sure to talk to the install shop regarding your wants. Make sure to secure the proper speedo gear to correct for the new ratio...they often will have access to them. Once the clutches in the tracloc are installed and the gear is in place you should be without rear end worries for quite some time. If the shop finds the axles are worn/damaged, 50 resto sells a nice replacement set slightly harder for 99 bucks..thats hard to beat.
I resemble that remark!DMAN302 said:Guys go fight it out in talk...and buddy if you seriously 31 stop embarrasing us geezers and move on.
Sorry dude. A little drama going on here. Cant seem to come to equal agreement.MikeC said:I just wasted 5 minutes reading this whole post.
GTOReturns said:Theres a method to the madness about keeping the stock h and headers on a stock 5.0. Its "Back Pressure". Because of the design of the heads the motor needs backpressure which makes the low end torque. OK, I would take 2 chambered flows over a straight through pipe because "of" the chambers.It adds more back pressure. Not to mention I had bullets with an off rd h with and without tail pipes. Loud? Oh yeah!! But it didnt sound like a 5.0 anymore!I had my E-7's worked on bt Thumper. THEN the stock h was choking the motor so I put a catted x pipe on and it free'd up some power!1
mob said:"backpressure" is really velocity, restricting the exhaust with cats does not give you more "backpressure"
woopty damn dogrey5.0beast said:Damn you are a bitch, just cause you didn't know jack **** about cars at my age and probably drove a POS you are a lil jealous.
My grandfather was an engineer for Ford for 35+years, my dad has a mechanical engineering degree but decided to go into the computer industry instead, but as a side hobby we toy with **** that ain't working and get it working. Not many 16 yr olds have 3 rebuilds under their belt...
Seriously need to find another way to waste a wednesday other than being punked by a youngin...try putting up something constructive.1fastsn95 said:woopty damn do
oh WTF ever!DMAN302 said:Seriously need to find another way to waste a wednesday other than being punked by a youngin...try putting up something constructive.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?