Resolved Medussa's hair is in Mustang.

Noobz347 · Sep 9, 2024

Hehe... My TFI is older than some of our members.

nickyb · Sep 9, 2024

Well it must be that I daily my stang a load of miles on this surface of the sun I call home Nevada.
Any who I just found the receipt from 2014 for the ignition switch, AutoZone still gave me a hard time warranting it out but I got one,now to marrow ill install it and see. And I found the receipt for the tfi module from 2010, when O'Reilly's use to be Checkers. Ill get a spare tfi.

89ripper · Sep 9, 2024

I think im 15 years on mine. I believe changed out late 2000s sometime.

Noobz347 · Sep 9, 2024

nickyb said:
Well it must be that I daily my stang a load of miles on this surface of the sun I call home Nevada.
Any who I just found the receipt from 2014 for the ignition switch, AutoZone still gave me a hard time warranting it out but I got one,now to marrow ill install it and see. And I found the receipt for the tfi module from 2010, when O'Reilly's use to be Checkers. Ill get a spare tfi.

Karthief laughed at me the other day when I said I had found a New-In-Box ignition switch in some old junk and it was better than finding money in an old coat.

These things have voodoo. If you have a spare, then yours won't eff up (unless the spare is Chinese then ur fkt).

nickyb · Sep 10, 2024

The AutoZone one is duralast and probably Chinese,the motor craft coming from rockauto is made in Mexico.
Nothing American about strange these American parts.anymore

General karthief · Sep 10, 2024

Yeah, I don't remember laughing but I prolly did, only because most enthusiasts store NOS or known good parts. I don't do that, I store old used up sensors that, by the way, I write on the box 'NFG' or 'broken'!!!

nickyb · Sep 10, 2024

Fugging new switch is in, started right up,idled for five mins. then cut off.
Turned the key and she just cranks, turned the key off then turned to start and she started right back up.
Idle for like ten mins. No issues. I'm gonna take it out for a spin and see.
Also I'm picking up a new motor craft tfi, and swapping the master pro one which I believe is the issue now that I replaced the ign.switch.
This is turning me into a grumpy old man.

nickyb · Sep 10, 2024

Rugged stalled on the way to and from auto store ,I picked up a ford module.
As soon as she's cooled off ill swap it.

nickyb · Sep 10, 2024

Fug fug fug. Installed new motor craft module and its worse then the master pro from oreilleys.
It won't even stay running in the garage. It didn't come with the grease so I used the one I got from staples,same one I used before.
I'm going out of my mind.

Noobz347 · Sep 10, 2024

Take your EGR valve off and see what kind of condition that it's in. Check the diaphragm for leaks.

nickyb · Sep 10, 2024

Noobz347 said:
Take your EGR valve off and see what kind of condition that it's in. Check the diaphragm for leaks.

Will do.

Noobz347 · Sep 10, 2024

I knew I'd seen something somewhere:

Stangnet TV FTW!

Hope it helps.

nickyb · Sep 10, 2024

Noobz347 said:
Take your EGR valve off and see what kind of condition that it's in. Check the diaphragm for leaks.

Just checked the egr diaphragm its good,haven't taken it off. But I did remove the motor craft tfi module and tested it,its fubared,.got another coming tommarow,for s and giggles I put the master pro back on and she idles great again.

nickyb · Sep 10, 2024

Noobz347 said:
I knew I'd seen something somewhere:

Stangnet TV FTW!

Hope it helps.

Nice video, but I'm not experiencing those symptoms. With mine it starts and idles great and while I'm driving she shuts off with no warrning,no stumble,just shuts off.
Wife will drive me to work tommarow,ill try and get a coworker to drive me to pick up new tfi and drop me off to physical therapy.
Its so much fun daily driving a 31 year old car.

Noobz347 · Sep 10, 2024

Hope it works out... Seems like there have been a [lot] TFIs bad out the box lately. Motorcraft, otherwise; it seems harder to find good ones.

Noobz347 · Sep 11, 2024

This is the next TFI that I buy:

Ford TFI Distributor 3 Pin Hall Effect Pickup Ignition Control Module [83648]

SpecsBrand:PCEPart Number:PCE383.1004Part Type:Ignition ModulesModule Pin Quantity:3Wiring Harness Included:NoQuantity:Sold individually.Notes:Fits Distributors with Ford TFI module.

www.speedmaster79.com

It's a California company founded in Australia. I've looked through all of the information I could find and there's no mention of China.

gkomo · Sep 11, 2024

Your wife is a saint. Mine would be like, umm no.

nickyb · Sep 11, 2024

Well I stayed home today so I could put the new TFI in when it came .
I called and cause of some bull it ain't coming in till tomorrow.
Since I'm home I decided to pull codes even though no light on.

Koeo I got 11 that's good
Then a 87 fuel pump circuit faut?

Koer I got a 4 then idle went up and came down
Then I got 21 cooling temp sensor/ECT out of range.
And a 46 thermactor air not bypassed? Dis system failure?

So what now??

nickyb · Sep 11, 2024

So General I don't think any code I have is the cause of my stalling issue, or should I say the cause of me losing my mind.
What to do?

Noobz347 · Sep 11, 2024

Did you KOER in the driveway?

The car should be heat soaked before Engine Running codes are run. That would be the code 21.

Resolved Medussa's hair is in Mustang.

Stangnet Facilities Maint Tech... Er... Janitor

I gotta say i never painted my nuts, Never Ever

Stangnet Facilities Maint Tech... Er... Janitor

I gotta say i never painted my nuts, Never Ever

wonder how much it would cost to ship you a pair

I gotta say i never painted my nuts, Never Ever

I gotta say i never painted my nuts, Never Ever

I gotta say i never painted my nuts, Never Ever

Stangnet Facilities Maint Tech... Er... Janitor

I gotta say i never painted my nuts, Never Ever

Stangnet Facilities Maint Tech... Er... Janitor

I gotta say i never painted my nuts, Never Ever

I gotta say i never painted my nuts, Never Ever

Stangnet Facilities Maint Tech... Er... Janitor

Stangnet Facilities Maint Tech... Er... Janitor

now i can hopefully expect to receive the shaft

I gotta say i never painted my nuts, Never Ever

I gotta say i never painted my nuts, Never Ever

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency