Modular Headshop/excessive Motorsports

  • Sponsors(?)


squeak93

10 Year Member
Jun 2, 2005
2,144
323
164
37
Joplin, Missouri
I waited 8 or 9 weeks for my custom grind cams. Bullet has odd grind schedules now and it took forever.

I looked at MHS grinds and they seem to make power but ots cams are not a 1 size fits all in the modular world.
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
yea so its worth the wait I did some research from old post so I came into this expecting to wait awhile .
Which cam set up did you get ? also if I get nitrous do I really need a nitrous cam?
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
damn I have a t45 with 3.73s and im thinking about nitrous with a romeo pi engine maybe I shoulda talk to todd also alwell im sure ill be more than satisfied with what I got
oh yea I remember reading your progress thread very nice my friend very nice!
 

squeak93

10 Year Member
Jun 2, 2005
2,144
323
164
37
Joplin, Missouri
You match your cams to your combo, not your combo to your cams. If that makes sense. Todd is the man but don't expect him to sugar coat stuff for you. :)
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
I rather not have it sugar coated when it has to do with my car but at the same time I don't have much of a "combo" going at the moment so basic should be fine .
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
I know I know lol I get it I see where your going but honestly with the little things done shes peppy enough for me so truly I would just like it to sound better ive always wanted a cam im just building a car for me ive gone down the road of trying to build that faster horse and I love it but its never ending so basically something that is mild that I actually drive everyday lol
 

XxApolloxX97

Member
Mar 7, 2017
59
9
18
23
I ordered my stage 3 heads and stage 5 cams for my build on April 10th and still waiting but I told him I have no problem waiting for a good product so hopefully they come soon!!
 

XxApolloxX97

Member
Mar 7, 2017
59
9
18
23
good luck all I ordered was stage 2 pi cams and ive been waiting since march and apparently they haven't even started on my order yet .
Wow, I hope you get them soon. I know when I called him to order he said this was busy season. He's a great guy to talk with very helpful. And everything i read says his products are awesome. it might homestly be the cam company that's behind.

Are you doing a pi swap?
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
oh yea great dude I don't have any issues with him and it is the cam shop that's behind .
to answer your question its a pi motor . Romeo block

p.s Im not bashing bullet either people get busy and flooded I get that
 
Last edited:

XxApolloxX97

Member
Mar 7, 2017
59
9
18
23
is there any way I could get ahold of Bullet and politely ask for an update on a time frame ? some things came up and I need to make a plan .
They have a website you can email them or I'm sure you can call them not sure what the number is

But if you want to cancel or do anything to the order you'd have to tell Jordan since you ordered from him
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
I talked to Mark from bullet already and I am not canceling he was able to tell me more about how much longer it will be .
Jordan is too busy to call them for everyone's order info. I just wanted to make sure that It wouldn't try to arrive after the relocation of my shop. Mark told me they are getting the next set of cores next week and my order is one of the next in line. Also worst case scenario mark also told me that he can change the address if need be
 

XxApolloxX97

Member
Mar 7, 2017
59
9
18
23
I talked to Mark from bullet already and I am not canceling he was able to tell me more about how much longer it will be .
Jordan is too busy to call them for everyone's order info. I just wanted to make sure that It wouldn't try to arrive after the relocation of my shop. Mark told me they are getting the next set of cores next week and my order is one of the next in line. Also worst case scenario mark also told me that he can change the address if need be
Good I hope you get them I know how you feel waiting for something, feels like Christmas is next week and then when it comes it gets pushed back the next week lol. I'm going to call and check on mine hopefully they're in next weeks line!!!
 

rattlecan96gt

Active Member
Dec 22, 2016
106
8
28
29
Dallas, Texas
yea with your heads it should be easier to find out , im not sure I could be wrong but except for the cams I think Jordan takes care of all that in house . Jordan even told me he is just so busy he doesn't have time to sit on the phone all day to get info for everyones orders on there cams when he has motors he needs to build. Which is perfectly understandable and honestly someones engine is more important than my little set of cams lol .
 
Thread starter Similar threads Forum Replies Date
Q Foxbody 5.4 4V Build Thread 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
M Hey Everyone! I’m new The Welcome Wagon 2
from6to8 Help And Advice On Modular Vs Non. Might Get Another Stang 1996 - 2004 SN95 Mustang -General/Talk- 0
from6to8 I'd Like Some Insight And Advice On Modular Vs Non Modulars. I'm Thinking About Getting Another Car 1994 - 1995 Specific Tech 2
modulistic Modular Fox Swap. Turns Over But No Fuel Pump. SN95 4.6L Mustang Tech 3
Obsol3te Considering Going Modular 1996 - 2004 SN95 Mustang -General/Talk- 4
B Modular Motor Savaunt SVT Tech Forum 6
B Expired Some Brand New Modular Ford Parts That Need To Leave My Shop... Other Classifieds 0
Skidzz Modular Depot. Final Verdict 7 Years Later. 1996 - 2004 SN95 Mustang -General/Talk- 6
LilBerx Pushrod Vs. modular 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 36
Three50won Canton Windage Tray (ford Modular 4.6/5.4) Engine and Power Adder Parts 0
95Vert383AOD Spring Cleaning Sbf & Modular Parts Engine and Power Adder Parts 5
powerbylincoln installing a modular k-member question Fox 5.0 Mustang Tech 3
jtcstrat1 FS random modular and non modular parts Drivetrain Parts 0
jtcstrat1 FS random modular and non modular parts Engine and Power Adder Parts 0
J Modular head shop reviews please 1996 - 2004 SN95 Mustang -General/Talk- 15
C Modular Head Shop 1996 - 2004 SN95 Mustang -General/Talk- 4
MRaburn SOLD Griggs Fox Modular K-member And Suspension Suspension Parts 9
A Aluminum 8 bolt modular flywheel Engine and Power Adder Parts 0
R JESSEL DOUBLE ROLLER FOLLOWERS MODULAR ENGINE Engine and Power Adder Parts 0
W 2011/12 DOHC modular 5.0 suitable for swap? Classic Mustang Specific Tech 8
B modular motor? SN95 4.6L Mustang Tech 4
J Some good used Modular Drivetrain goodies Drivetrain Parts 0
94mustangv67037 Modular Head Shop 1996 - 2004 SN95 Mustang -General/Talk- 26
A Tons of 4v and other modular parts! Engine and Power Adder Parts 0
S 4R70W 2WD Transmission, Modular Case. 4.6L, 5.4L Drivetrain Parts 1
4 Modular 4v 4.6 Sale!!!!! Engine and Power Adder Parts 2
P GM guy needs info on Modular engines. 2005 - 2014 S-197 Mustang -General/Talk- 7
Back2Mustangs FS: Modular PowerHouse's Custom, Kenne Bell Grind, 2-Valve Cam's (used 15K miles) Engine and Power Adder Parts 2
S Modular Power House 302 Stroker Shortblock for sale in NW Fl area! Engine and Power Adder Parts 6
2 school me on these modular motors SN95 4.6L Mustang Tech 64
S BRAND NEW OEM Ford Modular Timing Tensioners Engine and Power Adder Parts 0
WallyKilla Can Modular motors handle a 150 shot with a good tune? SN95 4.6L Mustang Tech 28
jtcstrat1 Saleen/modular CP forged Pistons Ford 3.554" Engine and Power Adder Parts 10
jtcstrat1 Saleen/modular CP forged Pistons Ford 3.554" Engine and Power Adder 3
S Tremec TKO 600 & Modular Bellhousing for sale! Drivetrain Parts 2
bhuff30 Dream modular build... 1996 - 2004 SN95 Mustang -General/Talk- 38
R Why called modular motors? 2005 - 2014 S-197 Mustang -General/Talk- 23
BK_CAULEY why did ford decide to call the 4.6 a modular motor? 1996 - 2004 SN95 Mustang -General/Talk- 5
GreyDiesel New Custom Tuning Option - Modular Muscle 2005 - 2014 S-197 Mustang -General/Talk- 1
MustangLX-5.0 Why are non-pushrod modular motors so noisy? 1996 - 2004 SN95 Mustang -General/Talk- 24
notchnut Pypes modular X pipe, anyone? 1996 - 2004 SN95 Mustang -General/Talk- 0
0 Beware of Modular Depot 2005 - 2014 S-197 Mustang -General/Talk- 9
T Modular motor or rebuild Classic Mustang Specific Tech 9
cobra killer Modular Powerhouse Dyno Day Regional Forums and Event Information 2
W Modular Chips? SN95 4.6L Mustang Tech 13
1 mods for the modular SVT Tech Forum 8
0 help a modular newb out! SN95 4.6L Mustang Tech 16
L Modular 2v swap Fox 5.0 Mustang Tech 5
G Anyone running the Bassani Modular X-Pipe Cats/Off road? 2005 - 2009 Specific Tech 11
Similar threads