• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

MOTIVATION!!!

  • Thread starter Thread starter 65stanger
  • Start date Start date May 28, 2006

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
May 28, 2006
#1
  • May 28, 2006
  • #1
Well I finally gone done do-ed it! "sally" is unwrapped from her "winter wear". I am hoping that now the weather is warmer, and she be almost naked it will be impossible to NOT get some work done, especially since I haven't done anything since before Thanksgiving!
I'm also taking a different tack.......next on the list will be the rear sub-frame/chassis/suspension work (sunny days), with the pass door skinning and engine stripping/paint for rainy days.
 

Realmongo

I prefer to be called "Evil Genius"
Founding Member
Oct 10, 2001
2,468
86
99
Western Mass
May 28, 2006
#2
  • May 28, 2006
  • #2
Well it's about time!
(I just finally got around to dropping my new 302 in)

 

t_chelle16

Keeper of the closet key
Founding Member
May 8, 2002
3,610
0
0
Knob Noster, Mo.
May 29, 2006
#3
  • May 29, 2006
  • #3
Spiffy.

I still need to get off my butt and start stripping down old Sadie and pull her engine & tranny, but it suddenly got hot.

The next thing I'll probably end up doing, though is getting new tires for new Sadie and swapping around wheels. Dad's going to let me use his Cragers (he bought them new) which are currently on the Dodge but those tires are dry-rotted (been sitting a while) so I need to get some new ones. New Sadie's wheels won't fit the Dodge but old Sadie's will. So I need to pull the Cragers off the Dodge, put old Sadie's wheels (slotted mags) on the Dodge, put new Sadie's wheels (plain old wheels with covers) on old Sadie, and put the Cragers on new Sadie (confused yet? lol).

I also need to do a little work on new Sadie's tranny. It's slipping going into 3rd and the reverse clutch is sticking a little. Not really horrible, but kind of annoying.

-Chelle
 

Realmongo

I prefer to be called "Evil Genius"
Founding Member
Oct 10, 2001
2,468
86
99
Western Mass
May 29, 2006
#4
  • May 29, 2006
  • #4
t_chelle16 said:
Spiffy.

I still need to get off my butt and start stripping down old Sadie and pull her engine & tranny, but it suddenly got hot.

The next thing I'll probably end up doing, though is getting new tires for new Sadie and swapping around wheels. Dad's going to let me use his Cragers (he bought them new) which are currently on the Dodge but those tires are dry-rotted (been sitting a while) so I need to get some new ones. New Sadie's wheels won't fit the Dodge but old Sadie's will. So I need to pull the Cragers off the Dodge, put old Sadie's wheels (slotted mags) on the Dodge, put new Sadie's wheels (plain old wheels with covers) on old Sadie, and put the Cragers on new Sadie (confused yet? lol).

I also need to do a little work on new Sadie's tranny. It's slipping going into 3rd and the reverse clutch is sticking a little. Not really horrible, but kind of annoying.

-Chelle
Click to expand...

So should we soon expect to see a "How to Rebuild your Ford C4 for Performance" article coming from you?
 

t_chelle16

Keeper of the closet key
Founding Member
May 8, 2002
3,610
0
0
Knob Noster, Mo.
May 29, 2006
#5
  • May 29, 2006
  • #5
LOL. No, not for performance. For now I just want to get it working better. When I rebuild old Sadie's 289, I'll also rebuild her tranny, but nothing too special because I'd eventually like to get an AOD.

-Chelle
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
May 30, 2006
#6
  • May 30, 2006
  • #6
BBFC,

Good to see you up and about! You've been quiet.

'Chelle - AOD's are fun, but there are lot's of "issues" in putting it in our cars. When I put one in Chepie, it created some headaches, but with adding 3.55 gears, it did make it fun to drive. Toss in the Cragars, new Sadie will be racing from stop light to stop light!
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Jun 2, 2006
#7
  • Jun 2, 2006
  • #7
chepsk8 said:
BBFC,

Good to see you up and about! You've been quiet.!
Click to expand...
I've been here.......just......lurking!
Between work (5 and 6 night stretches w/ 1 of twixt n tween) and playin at the FD I haven't had much time elsewise....speaking of which..........

Check out this link.....: http://www2.timesreview.com/ST.php

can you spot Waldo?
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
Jun 2, 2006
#8
  • Jun 2, 2006
  • #8
Front row right carrying a big crow bar to work on Sally with?
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jun 2, 2006
#9
  • Jun 2, 2006
  • #9
Nah..... that's an axe in case the GBM locks The Closet door and hides Chelle's key again

Right guy, though
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Jun 4, 2006
#10
  • Jun 4, 2006
  • #10
chepsk8 said:
Front row right carrying a big crow bar to work on Sally with?
Click to expand...
That my friend is a precision tool! It is used to make precise holes in roofs and open windows from the outside. Used in conjunction with another precision tool known as a "Halligan" it can also be used to unlock doors!
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jun 4, 2006
#11
  • Jun 4, 2006
  • #11
65stanger said:
That my friend is a precision tool! It is used to make precise holes in roofs and open windows from the outside. Used in conjunction with another precision tool known as a "Halligan" it can also be used to unlock doors!
Click to expand...

Funny, I thought the common window-opening tool was an exhausted 15-lb extinguisher bottle

And, you realize that, while an axe and a Halligan are a nice door-opening combo; you could also do well with a Hooligan carrying some small paperclips

Ugh. Now I'm searching for motivation! Gotta go figure out why the RAM has a dead battery, and finish running power wiring for my radio stack under the back seat of the F150.
 

oboebrian

Founding Member
Aug 8, 2002
2,510
0
0
In the Gutter Gaurding the Closet Door against She
Jun 4, 2006
#12
  • Jun 4, 2006
  • #12
StangDreamin' said:
Funny, I thought the common window-opening tool was an exhausted 15-lb extinguisher bottle

And, you realize that, while an axe and a Halligan are a nice door-opening combo; you could also do well with a Hooligan carrying some small paperclips
Click to expand...

I know you rednecks down in Yuma like doing things in a different way, but you might want to try using your keys once in a while...
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jun 4, 2006
#13
  • Jun 4, 2006
  • #13
Keys are always good; but there are unforseen occurrances - your younger daughter borrows a key a forgets at whose house she left it, the older daughter leaves it in the toolbox of her truck before she drives to Louisiana........ (not that either of those inconveniences has ever happened to me )
In those instances, it's always good to have a backup plan!

Gotta go back out. Need to see who's got a decent Group 65 battery for the RAM. Steenkin' thing only lasted about 3 summers and it's already lost a cell Time to grit my teeth and empty my wallet.
 

oboebrian

Founding Member
Aug 8, 2002
2,510
0
0
In the Gutter Gaurding the Closet Door against She
Jun 5, 2006
#14
  • Jun 5, 2006
  • #14
StangDreamin' said:
Gotta go back out. Need to see who's got a decent Group 65 battery for the RAM. Steenkin' thing only lasted about 3 summers and it's already lost a cell Time to grit my teeth and empty my wallet.
Click to expand...

I understand.. I just got done fixing the A/C in my explorer last weekend when the clutch went out as I pulled into my driveway!!!!!!!!!!!!
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jun 5, 2006
#15
  • Jun 5, 2006
  • #15
Well, the battery wasn't too much of a surprise - it was the OEM battery installed in the truck at the factory; so it's over 4 years old. As I mentioned in my daughter's thread; that fact that one of our vehicles had a 4-year-old battery (it's a 2002 truck) can easily explained by my not having put any Amateur Radio gear in the wife's truck!

Good news is that autozone is now selling batteries from Johnson Controls, as opposed to Exide. Johnson batteries are known for best standing up to the heat. Since the Ram is commonly referred to as "the Mom-mobile", I'd like a decent battery in it!

Unfortunately, while in there, I found out that the e-fan for the A/C condenser (mounted seperately from the radiator and oil/tranny coolers) is dead. Much web-searching for the correct replacement only p***d me off, so I just finished dropping 79.95 plus freight for a Flex-a-Lite 394 through (of all places) Amazon.com As long as it works......
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Jun 6, 2006
#16
  • Jun 6, 2006
  • #16
StangDreamin' said:
nd, you realize that, while an axe and a Halligan are a nice door-opening combo; you could also do well with a Hooligan carrying some small paperclips
Click to expand...
The hooligans around here prefer bricks over paperclips.......it's hysterical watching them throw a brick at a "Hurricane-Proof" (i.e. "lexan") window, only to have it riccochette (sp?) and nail them in the head!
 
You must log in or register to reply here.

Similar threads

S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
609
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
G
1983 GLX Convertible 5.0 5-Speed 4BBL 'Barn Find' - 82,000 original miles - Restoration Motivation Needed
  • Grande Luxe X-Factor
  • Oct 7, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 31, 2024
Mac131
My 93 4v Fox
  • OffspringChaos
  • Aug 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2024
bird_dog0347
Fox The build - 4eyed Fox - Stoppie Montoya
  • mansour.aref
  • Aug 20, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 20, 2022
General karthief
S
'88 GT Convertible - Croatia, Europe
  • snovak
  • Oct 9, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 23 24 25
Replies
498
Views
48K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
snovak
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?