Build Thread Mustang5L5's Build Thread -

Mustang5L5 · Jan 16, 2021

Here’s the good stuff I’ve been waiting for.

looks like a quality piece. Also ordered a new set of Driveshaft bolts and an energy suspension poly mount. I’m going to go weigh them to see if there is a difference in weight.

Edit:
stock 4.7 pounds
Stifflers: 5.0 pounds

My 3 year old helped me clean and prep parts today. He will go as long as I let him and never wants to stop.

gonna try to get the car setip off the ground and start putting this guy in. Considering I already had it mated up, I hope I can just get it in cleanly without much of a fight

Mustang5L5 · Jan 17, 2021

Ok. I have everything I need for the cruise install other than one piece. The column wiring harness.

So if anyone has an 84-89 parts car with tilt and cruise, I need the 3-finger contact harness with the black, purple and blue wire. Needs to be usable, and some are ground down to nubs. Thanks

Mustang5L5 · Jan 19, 2021

Things to do later...

How accurate is your stock fox tach? results inside...

Well i just finished some tests on a stock fox v8 tach and it is acurate till about 4500 rpm then all hell breaks loose. I did these tests as i am transplanting a sn95 instrument cluster into my fox. I want to get rid of my cable speedo!!! as it keeps melting by the headers and it will look...

www.corral.net

Mustang5L5 · Jan 19, 2021

Nice parts!

need to figure out the wiring with my Momo Hub. I don’t want to pull the wheel off until I have the new column harness

Mustang5L5 · Jan 19, 2021

And look at that. Ford found it convienent to predrill the servo mount holes and give me hardware. It’s like they wanted me to put this cruise control setup in the car

Gotta say, having the fenders off makes this easy. No way would I do this if the car was whole

Trying to find time to work on this car is impossible. I keep tripping over the trans so I want it out of my way. Might have to take a half day of wirk and just get it done

General karthief · Jan 19, 2021

I got too many irons in the fire!
I thought I gave you a shop of the harness you wanted, sometimes I just can't keep things straight.

Pm me your address and I get this in the mail
Now, who is scratch'n their head thinking WTF? I know I posted this aready.

Mustang5L5 · Jan 20, 2021

General karthief said:
I got too many irons in the fire!
I thought I gave you a shop of the harness you wanted, sometimes I just can't keep things straight.

Pm me your address and I get this in the mail
Now, who is scratch'n their head thinking WTF? I know I posted this aready.

That’s the one!
PM incoming! Thanks

95BlueStallion · Jan 20, 2021

Love seeing people help others on here. That’s what it’s about.

90sickfox · Jan 20, 2021

95BlueStallion said:
Love seeing people help others on here. That’s what it’s about.

Man that's the truth. The help here is truly amazing. Renews my faith in humanity a little bit. This is how my old mustang click used to be. We all freely helped others in the group. If someone had to pay it was a very reasonable price.

General karthief · Jan 20, 2021

No applause, just send money

mikestang63 · Jan 20, 2021

90sickfox said:
Man that's the truth. The help here is truly amazing. Renews my faith in humanity a little bit. This is how my old mustang click used to be. We all freely helped others in the group. If someone had to pay it was a very reasonable price.

WAIT A MINUTE!!!! i've been paying Dave $10 a month for 9 years here.......

General karthief · Jan 20, 2021

mikestang63 said:
WAIT A MINUTE!!!! i've been paying Dave $10 a month for 9 years here.......

Well that's a reasonable price.
Noobz would have charged you more.

Mustang5L5 · Jan 20, 2021

General karthief said:
No applause, just send money

you stuck a GT40 tubular in the package too right?

Mustang5L5 · Jan 20, 2021

So decided to wire up and install the buttons. This is a nicely made abd annodized mount

also was able to pull the non-cruise column harness out as well.

General karthief · Jan 20, 2021

Mustang5L5 said:
you stuck a GT40 tubular in the package too right?

I send one with every order

Rdub6 · Jan 20, 2021

95BlueStallion said:
Love seeing people help others on here. That’s what it’s about.

@JKWilson61 sent me some hardware at one point. And once I get this rear end sorted out, I’ll have plenty of stuff to pay it forward I hope.
This site has been awesome with help, info, humor..... whatever you need, it’s here!

Rdub6 · Jan 20, 2021

General karthief said:
I send one with every order

In that case, I’ll order one of those harnesses too!

BlakeusMaximus · Jan 20, 2021

90sickfox said:
Man that's the truth. The help here is truly amazing. Renews my faith in humanity a little bit. This is how my old mustang click used to be. We all freely helped others in the group. If someone had to pay it was a very reasonable price.

@General karthief hooked me me up with my oem air box for a reasonable price a few years back. Thanks again man!

Deleted member 215073 · Jan 20, 2021

General karthief said:
I send one with every order

Mine must have been lost in the mail...

General karthief · Jan 20, 2021

JMGlasgow said:
Mine must have been lost in the mail...

I'll get right on it

Build Thread Mustang5L5's Build Thread -

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

My assy trans to myself

Wasn't a pretty sight...and I've got big hands

wonder how much it would cost to ship you a pair

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

So while I wait to figure out my rear end issues

So while I wait to figure out my rear end issues

Still got to try a little lube on my speedo head

Deleted member 215073

wonder how much it would cost to ship you a pair

Similar threads

Privacy & Transparency

Privacy & Transparency