My cobra intake

[5.0TailPipeHump]

Hey guys just thought id show off my intake and decal to go with it but 1 question comes to mind ' i want some opinions here .

Was wondering if its a good idea to slap on the intake with a 65mm tb without the heads cause i cant afford heads at the moment ' or should i wait till i get some heads for my set up'

Ill be porting the lower part of the intake. The car is pretty much stock at the moment.

 

[9 Deuce GT]

The intake and T/B will provide a slight increase in HP, but you really should add a bigger mass air meter with it.

 

[Aaron]

Personally, I would not want to do the work twice.
Hold off.

 

[grey5.0beast]

I did the same thing. I just put on my explorer intake and now I am doing HCI plus rings and bearings and clutch, etc, etc. I didn't mind waiting on the heads. It took a year for me between the explorer and this rebuild so why not.
Oh and I put on a 70mm TB and MAF at the same time as the intake.

 

[SVT32VDOHC]

I say slap it on now if the heads are going to be like August, Sept, Oct.

I say hold off it the heads are going to be like later this month/next month.

 

[5.0TailPipeHump]

I forgot to mention i do have a 70mm maf off a 95 5.0' Iv never swapped an upper and lower but im looking forward to it ! i think im gonna do the swap anyways' it will be a learning curve for me when time comes to get the heads going on .

How long does it take to do the swap and will i need to pick up any hoses or brass fitting that i dont have on the car .

thanks for the input guys.

 

[JamesB88]

Id hold off, ive had a cobra intake sitting around for a year now that ive polished, Now ive got heads, and putting together the short block and utting all the new stuff on at once. YOu wont see alot of gains from just the intake/throttle body.

 

[Fuzion]

Slap the new parts on... you'll notice a difference. btw looks great

 

[Mustang5L5]

I got some decent gains with just the intake/65mm TB on stock heads.

The biggest difference was response after 2500RPM. With the Cobra it pulled harder.

Granted it isn't a huge diff, but it's noticable.

However if the heads are coming soon, just wait. Then it will be one hell of a kick in the pants when you do it all together

 

[iwashmycar]

nice where do they sell the decals/emblems for a cobra intake?...my red all got degreased off ...

 

[5.0TailPipeHump]

nice where do they sell the decals/emblems for a cobra intake?...my red all got degreased off ...

I got it from a local guy here his name is mark ' a great guy to deal with ' i belive he does 5.0 and 5.8 decals http://www.proscmotorsports.com/

 

[BK_CAULEY]

i voted wait for it

 

[Mr. Rustypwnz]

might as well do it, it takes 45mins just do it for fun, at least youll feel a little from it, to hold ya over....

 

[red95gtconvert]

might as well do it, it takes 45mins just do it for fun, at least youll feel a little from it, to hold ya over....

It takes a little longer than 45 minutes lol, I installed my Cobra intake and 6 months later I installed myGT40P heads. If you are not going to do heads for a while I would install the intake, you will feel a difference.

 

[wythors]

If you've done it before, swapping an intake is no big deal and doesn't take long at all. I'd go for it.