Need A/C Help Jrichker chime in and others!

mattmcdan

Member

Apr 19, 2006

176

0

19

Okeechobee, Florida

Sep 25, 2006

#1

• Sep 25, 2006

• #1

I bought a 1990 LX notch, 4cyl 5spd, I removed engine and trans today, and the efi harness. I will be installing a carb'd 5L T5 and I want to keep A/C. I am taking off the entire a/c system from my 1986 vert 5L, I just had it converted to 134A with all new seals, evaporator, compressor, and liquid line. My question is, Is there any way to wire this up to where I turn the knob my my dash that it will kick in the a/c compressor and cool me down without the EEC?

Thanks,
Matt

 

S

superhuaman

New Member

Nov 8, 2004

907

0

0

Harrisburg, PA

Sep 25, 2006

#2

• Sep 25, 2006

• #2

sure! theres a wire coming from the dash harness that is the output from the a/c dash switch. all you have to do is connect that wire to the lps (low pressure switch) on the accumulator, and the other lps terminal goes to the positive terminal on the a/c compressor. i dont know if the wire is in the gray or the black connector at the booster, but the wire color should be LG/P light green with pink stripe.

 

S

superhuaman

New Member

Nov 8, 2004

907

0

0

Harrisburg, PA

Sep 25, 2006

#3

• Sep 25, 2006

• #3

also, dont forget that the 2.3's had an electric fan / AC controller in them. if youre planning on using an electric fan, the existing controller can be wired to control it. otherwise, dont worry bout it

 

mattmcdan

Member

Apr 19, 2006

176

0

19

Okeechobee, Florida

Sep 26, 2006

#4

• Sep 26, 2006

• #4

good info, there are two wires on the a/c compressor, does one need to be grounded?

 

mattmcdan

Member

Apr 19, 2006

176

0

19

Okeechobee, Florida

Sep 26, 2006

#5

• Sep 26, 2006

• #5

Im basically looking for an old school way to wire this a/c with a carb, If superhuman's method is correct Id appreciate some more feedback. Also need more info on the compressor plug it has 2 wires, it one of them is a hot from the pressure switch what is the other wire?

Thanks fellas, Matt

 

S

superhuaman

New Member

Nov 8, 2004

907

0

0

Harrisburg, PA

Sep 26, 2006

#6

• Sep 26, 2006

• #6

yes you are correct, the other wire from the a/c compressor is ground. i believe the colors are BLK/Y for power and BLK for ground, on your 86 stuff. i recommend using the original plug and wires from the a/c compressor, because you NEED the diode in the circuit (see diagram).

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Sep 26, 2006

#7

• Sep 26, 2006

• #7

The only thing the ECC really does with the A/C is to turn it off at WOT and boost the idle speed when it is on & the engine is idling.

superhuaman seems to have all the bases covered with this one.

 

mattmcdan

Member

Apr 19, 2006

176

0

19

Okeechobee, Florida

Sep 26, 2006

#8

• Sep 26, 2006

• #8

Thanks fellas.