need a tune up

[5.slowmaroon]

i have a 1900 mustang gt. i wanna give it a tune up. i just did the oil change, im ordering a rearend cover and gasket, im getting poly motor mounts and poly trans mount. my motor shakes alot will the motor mounts help out the power a little? and now i need wires and plugs. any suggestions on brands?

 

[BigmacK192]

Motorcraft copper plugs are the way to go imo. That's what the engine was designed to use. And as for wires, I'm running MSD wires (8.5 mm I believe) and they're great. I'd check out Accel or Taylor too.

 

[Mustang5L5]

Motormounts won't help with power.

+1 on the copper motorcraft plugs. As for wires, there are tons of good wires. I like the 9mm Ford racing wires myself

 

[cjrpony]

Motormounts won't help with power.

+1 on the copper motorcraft plugs. As for wires, there are tons of good wires. I like the 9mm Ford racing wires myself

+1 on the Ford Racing wires. Poly motor mounts are going to make your car shake more.

 

[Cobra1741]

i run 8.5 mm msd wires and ngk tr55 copper plugs.

 

[DrunkPony]

I hate those poly bushing IMO they are squeaky as hell down the road. and make the car ride stiff.

 

[SpartaPerformance]

I'ld go with 1 step colder plug, FRPP 9mm wires or ACCEL 300+, Davis Unified Ignition systems TFI module and coil, advance the timing, set TPS voltage. That will wake the beast up.