• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

NEED HELP!!! MAF / SPOUT PROBLEM ?????

  • Thread starter Thread starter speedemon60
  • Start date Start date Oct 20, 2004
S

speedemon60

New Member
Oct 20, 2004
1
0
0
Oct 20, 2004
#1
  • Oct 20, 2004
  • #1
HI EVERYONE
I would really appreciate it if someone could be of assistance. I own a 1994 Ford Mustang GT V8 5.0. I’ve modified the car with heads, intake, TB, 24lb injectors, mass air (calibrated for 24lb injectors), everything (no supercharger). I did keep the stock cam for drivability issues. The car ran great; I ran a diagnostic and no codes showed up.
Recently, the car started running pretty bad. I though it might be an ignition problem, so i changed the Ignition Control Module ( ICM ) with a JEGS unit. That wasn't the problem. I put it on a diagnostic machine, and received codes 157 (Mass Air Flow signal low or grounded), code 212 (Ignition TACH signal was erratic or SPOUT circuit fault) as well as 136 (oxygen sensor lean bank 1). Can you please inform me of how to resolve the issue with codes 157 and 212 and what do they mean? Why would the voltage be low?? I don’t know where to start. While the engine is idling, if I disconnect the Mass Air the engine begins to run better, if I reconnect the idle drops and runs bad. Do I need a new MAF?? BAP sensor?? PLEASE HELP !!!!!!!!
If you can help please email at www.speedemon60@yahoo.com
thanks
 
J

jerry beach

Founding Member
May 20, 2002
2,671
0
46
Ocala,FL
Oct 20, 2004
#2
  • Oct 20, 2004
  • #2
Here is one of best tools available for working on these cars. Its the very first one on top.

http://www.amazon.com/exec/obidos/search-handle-form/002-6808509-4572

Your MAF sensor is prolly bad. But it could be a wire in that circuit or the computer itself causing you problems. I would fix that code first and then reset the puter. Its prolly ok to drive it if you need it with the sensor unplugged. If you have a digital volt/ohm meter and that book it will walk you through testing each circuit. The codes only lead you to a particular circuit. Its really cheaper to buy the book. Throwing parts at these things is expensive. I know, I have many spares that are good. If you have a bud with a MAF he will loan you, you can swap and test that way. I take it yours may be calibrated different from a stock one so that may not be the way to go. Good luck. Sorry that link didnt work. Here is the book I have, and many other here swear by it too.

Ford Fuel Injection & Electronic Engine Control : All Ford/Lincoln-Mercury Cars and Light Trucks 1988 to 1993 -- by Charles O. Probst; Paperback (Rate it)
Avg. Customer Rating: 4.4 out of 5 stars
Buy new: $34.95 -- Used & new from: $23.54
 

dstanggt50

Founding Member
Sep 13, 2000
1,316
0
0
Woodinville, WA
Oct 20, 2004
#3
  • Oct 20, 2004
  • #3
I had some driveability issues and turned out to be maf, had same simptoms. I would maybe replace injectors w/the stock 19's so you can put your stock maf back on, see if it helps w/some of the driveability, or if you know anyone that has a maf cal for 24lb, you could put that on also. Also, if you have a spout code, maybe pull the spout while idleing and see if the car changes, to see if the spout is working correctly.
 
S

speedemon60

New Member
Oct 20, 2004
1
0
0
Oct 21, 2004
#4
  • Oct 21, 2004
  • #4
what's up guys!!

Thanks for your input. I really appreciate it. I'll try to change the mass air meter. There goes another $300 on credit card bill!!!!
Again, I appreciate it.
thanks
 
You must log in or register to reply here.

Similar threads

1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
927
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
426
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
303
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
706
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
459
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?