• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need quick help from computer, Tweecer pros.

  • Thread starter Thread starter Black1987Stang
  • Start date Start date May 29, 2007

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
May 29, 2007
#1
  • May 29, 2007
  • #1
I'm currently using the stock maf and injectors. How can I run a Pro-M 75mm maf calibrated for 24lbers but use 19lb injectors and not the 24lbers. I saw the different maf files in the MAF folder. I see "PROM_19" and "PROM_24". I'm confused on these, can they be used for my 75mm meter? They make different size meters don't they and they would have a different file for each size I would think?

2. Do I need to change the injector slopes or anything (right now I have the ones for the stock 19lbers....stock A9L calibration)

3. Any help with what exactly I'm going to have to do would be great....like what MAF file I will have to use and anything else I have to do. ....and then what I will need to do when I do put in the 24lb injectors with the 75mm meter (just run stock maf file and let the calibration in the meter take care of it or configure something myself ) if I do have to, do I need to do something with the injector slopes?


I've heard when you have bigger heads, cam, intake, tb to set both high and low injector slopes the same number as the lb. injector it is. Should I do this?

Thanks! Sean
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
May 29, 2007
#2
  • May 29, 2007
  • #2
Black1987Stang said:
I'm currently using the stock maf and injectors. How can I run a Pro-M 75mm maf calibrated for 24lbers but use 19lb injectors and not the 24lbers. I saw the different maf files in the MAF folder. I see "PROM_19" and "PROM_24". I'm confused on these, can they be used for my 75mm meter? They make different size meters don't they and they would have a different file for each size I would think?

2. Do I need to change the injector slopes or anything (right now I have the ones for the stock 19lbers....stock A9L calibration)

3. Any help with what exactly I'm going to have to do would be great....like what MAF file I will have to use and anything else I have to do. ....and then what I will need to do when I do put in the 24lb injectors with the 75mm meter (just run stock maf file and let the calibration in the meter take care of it or configure something myself ) if I do have to, do I need to do something with the injector slopes?


I've heard when you have bigger heads, cam, intake, tb to set both high and low injector slopes the same number as the lb. injector it is. Should I do this?

Thanks! Sean
Click to expand...
If you aren't sure of the MAF Transfer file, then contact PMAS. They should be able to get you a file that will be fairly close.

You don't need to change the injector slopes if you are running the stock injectors.

When you install the 24's, you will need to modify the injector slopes. The tweecer manual has some numbers to get you close for the high & low.

You have moved into the realm of custom tuning. You don't have to depend on 'calibrated' MAF meters anymore

I've heard the theories on setting the high and low slopes the same as well, but in my experience they will be different.
The variable in there is the injector breakpoint...
Start with the values in the tweecer manual


Hope that helps,
good luck,
jason
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jun 19, 2007
#3
  • Jun 19, 2007
  • #3
Thanks, anybody know the PMAS website or happen to have the Pro-m 75mm maf transfer file? Thanks, Sean
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 20, 2007
#4
  • Jun 20, 2007
  • #4
I may have some better transfers in an excel file on my site. Not sure what page though.
If you can't find them, let me know, and I can post a zip file or a link when I get home (I can't access my site from work).

here is the pmas site...
http://www.massairsystems.com/products.htm

jason
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jun 20, 2007
#5
  • Jun 20, 2007
  • #5
vristang said:
I may have some better transfers in an excel file on my site. Not sure what page though.
If you can't find them, let me know, and I can post a zip file or a link when I get home (I can't access my site from work).

here is the pmas site...
http://www.massairsystems.com/products.htm

jason
Click to expand...

I couldn't find it on your site, I'll wait till you can get back home. Thanks! Sean
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 20, 2007
#6
  • Jun 20, 2007
  • #6
Black1987Stang said:
I couldn't find it on your site, I'll wait till you can get back home. Thanks! Sean
Click to expand...

I had to load the file to my site, but is is here now...
http://www.freewebs.com/vristang/tweecerdownloadslinks.htm
Go down to the section titled 'MAF Transfers'

Or this should take you directly to the file...
http://www.freewebs.com/vristang/ProM_Maf_30point(1).xls


Hope that helps,
jason

EDIT:
Actually, it looks like that is the same info you already have...
If that is the case then my only suggestion is to contact PMAS directly at....
http://www.massairsystems.com/
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jul 12, 2007
#7
  • Jul 12, 2007
  • #7
vristang said:
I may have some better transfers in an excel file on my site. Not sure what page though.
If you can't find them, let me know, and I can post a zip file or a link when I get home (I can't access my site from work).

here is the pmas site...
http://www.massairsystems.com/products.htm

jason
Click to expand...

Sorry for the late reply, I got to where all the maf transfer tables are (on Your site and PMAS site) BUT all I keep getting is the "What do you want to do?...Use the Webservice to find the appropriate program...or...Select the program from a list"

I don't have Microsoft Excel so I can't see it, I tried to open it in some other programs but everything just came up as jiberish. Could you send me the file to my email or Pm it to me, just some way I can see it in and is the easiest for you. It would GREATLY appreciated! Thanks for all the help! Sean
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jul 12, 2007
#8
  • Jul 12, 2007
  • #8
Black1987Stang said:
Sorry for the late reply, I got to where all the maf transfer tables are (on Your site and PMAS site) BUT all I keep getting is the "What do you want to do?...Use the Webservice to find the appropriate program...or...Select the program from a list"

I don't have Microsoft Excel so I can't see it, I tried to open it in some other programs but everything just came up as jiberish. Could you send me the file to my email or Pm it to me, just some way I can see it in and is the easiest for you. It would GREATLY appreciated! Thanks for all the help! Sean
Click to expand...

Sorry Sean, I have been meaning to find a way of dealing with this, but haven't found anything that would be easy for both me and the user....


Shoot me a pm with an email address to contact you.
I'll get the info to you somehow...
Even if I have to take a pic and send it as a jpeg.

Do you have Microsoft Word?
Notepad?



later,
jason
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jul 12, 2007
#9
  • Jul 12, 2007
  • #9
Thanks alot, I appreciate it. I'll PM you my email. I do have Notepad and Wordpad, but not Word. Thanks again, Sean
 
You must log in or register to reply here.

Similar threads

Pro-M 75MM Bullet Flow Sheet - Is this calibrated for 36 # injectors?
  • dan50
  • Jan 11, 2026
  • Digital Self-tuning Forum
Replies
2
Views
458
Digital Self-tuning Forum Jan 11, 2026
dan50
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
F
86 notch NEED HELP!!!!
  • foxbody86
  • Jul 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
170
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2026
Noobz347
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
852
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?