• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

Newb ?? re: lowering my 98 SVT...I'm ignorant.

  • Thread starter Thread starter tygr1
  • Start date Start date Jun 22, 2004

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Jun 22, 2004
#1
  • Jun 22, 2004
  • #1
Hey kids,

Just got myself a 98 Cobra and would like to use the Eibach 2.0\1.8 spring kit. What other mods do I need or want in order to do this and maintain or improve the handling? How will it ride? Do I need to change shocks? Anything you can respond with will be greatly appreciated!

Thanks in advance!!
 

trents99

Founding Member
Jun 28, 2002
438
0
0
Hampton, GA
Jun 22, 2004
#2
  • Jun 22, 2004
  • #2
tygr1 said:
Hey kids,

Just got myself a 98 Cobra and would like to use the Eibach 2.0\1.8 spring kit. What other mods do I need or want in order to do this and maintain or improve the handling? How will it ride? Do I need to change shocks? Anything you can respond with will be greatly appreciated!

Thanks in advance!!
Click to expand...

I would suggest CC plates, shocks and struts for that much drop. Ride will be more firm than what it is now with much better handling.
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Jun 22, 2004
#3
  • Jun 22, 2004
  • #3
Is that too much drop for some reason? Should I go with just the 1-1\2" drop like a lot of you guys seem to do?

Look...I'm a geezer with a new hot rod...the last one was a 1968 Shelby Cobra GT 350 when I was 17-18. I got rid of that car because of my youth and naivete. I finally got another one...but 30 yrs newer. I LOVE it!!

So tell me your opinions on dropping my 98...Pleeeeeeeeeze???!!
 

KnRs88

Founding Member
Jul 1, 2002
189
0
0
Chicago suburb
Jun 23, 2004
#4
  • Jun 23, 2004
  • #4
I have the Ford C springs ,(about 1-1/2" drop) on my 98' with Hotchkis cc plates, stock shocks and the ride quality is still pretty good.


Rich
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Jun 23, 2004
#5
  • Jun 23, 2004
  • #5
Thanks Rich! Your 98 sounds nice!

Mine has 3:73 gears, Flowmasters welded in with H crossover, and as far as I know, everything else is box stock. What else can I do for some ez HP gains? What can I do to this air filter/intake setup?
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
Jun 23, 2004
#6
  • Jun 23, 2004
  • #6
tygr1 said:
Is that too much drop for some reason? Should I go with just the 1-1\2" drop like a lot of you guys seem to do?

Look...I'm a geezer with a new hot rod...the last one was a 1968 Shelby Cobra GT 350 when I was 17-18. I got rid of that car because of my youth and naivete. I finally got another one...but 30 yrs newer. I LOVE it!!

So tell me your opinions on dropping my 98...Pleeeeeeeeeze???!!
Click to expand...

Hehe, I wouldn't call myself a geezer but I'm not a punk either. A buddy and I dropped his '03 Cobra last week. He used the H&R Super Sports. There are worth about 1.5 inches of drop. So far he hasn't needed anything else. We'll be doing my '03 Cobra this Friday. I'm using the same springs. From what I've read nothing else (other that the alignment) is needed. I didn't want to dramatically change the ride "cushiness". Hopefully these will provide a decent ride. I’m dropping mine more for looks than performance. I just installed some 18” FR500’s and the car looks like a 4 X 4.

Here's a link to his pics
http://forums.stangnet.com/showthread.php?t=475574

Have you searched?
http://www.svtperformance.com/

SVTP is a damn good technical resource. Should have plenty of info for ya.

Keith
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Jun 23, 2004
#7
  • Jun 23, 2004
  • #7
Thanks Duner...the blue 03 is really sweet! Yea, I'm picking up a set of Eibach 1-1/2s tomorrow...considering shocks too but may keep the stock ones for a little better ride.

Thanks a million for the link also. I bookmarked it immediately.
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Jun 23, 2004
#8
  • Jun 23, 2004
  • #8
Another geezer with a hotrod here. We used the Eibach kit on our 96, along with caster/camber plates and the stock shocks. The ride is significantly firmer, but not unpleasantly so. The thing handles like its on rails and feels rock solid at 120 mph. The only real problems are steep driveways and gnarly speedbumps. My wife drives it every nice day and loves it. Picture attached.

Dave
 
I

igotyofire

Member
Feb 26, 2004
774
1
19
Southern California
Jun 25, 2004
#9
  • Jun 25, 2004
  • #9
wythors said:
Another geezer with a hotrod here. We used the Eibach kit on our 96, along with caster/camber plates and the stock shocks. The ride is significantly firmer, but not unpleasantly so. The thing handles like its on rails and feels rock solid at 120 mph. The only real problems are steep driveways and gnarly speedbumps. My wife drives it every nice day and loves it. Picture attached.

Dave
Click to expand...

pro kit?
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Jun 25, 2004
#10
  • Jun 25, 2004
  • #10
igotyofire said:
pro kit?
Click to expand...
Yessir.
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Jun 25, 2004
#11
  • Jun 25, 2004
  • #11
Thanks all!!!

Put in the Eibach 1-1/2s yesterday, stock shocks, no plates....WOW...best money I've spent on it so far! Still rides pretty good (IMHO), and handles and feels MUCH better.

I'm a happy camper and just can't thank YOU ALL enough!!
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
Jun 25, 2004
#12
  • Jun 25, 2004
  • #12
Glad you're liking it. Sounds like you've a good combo.

Woo hoo. Just got done installing H&R Super Sports on my '03. Much better.
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Jun 26, 2004
#13
  • Jun 26, 2004
  • #13
Nice Duner. I'll bet it looks great!

I also installed a set of 1-1/4" wheel spacers on the back axles with my stock Cobra Rs which are only 8" wide...WHAT a DIFFERENCE!! It looks like a whole different car now. YES!

Wheel wells full!
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
203
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
Suspension Foxbody ride height change after installing new control arms
  • Mhalc1
  • Jan 3, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
36
Views
9K
Fox 5.0 Mustang Tech May 10, 2024
Mhalc1
C
Progress Thread 2004 Comp Orange GT
  • ctandc
  • Jun 26, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
56
Views
5K
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
ctandc
C
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?