nitrous accessories
- Thread starter hookups333
- Start date
bill302
Active Member
bottle heater cutoff switch...fuel pressure cutoff switch..and some relays...
i cant find any good prices on a bottle heater cutoff switch and you can buy relays at a local autoparts store.
heres a fuel pressure cutoff switch.
http://motors.search.ebay.com/nitro...Z6000QQsamcmZ6000QQsaspiZ2QQssPageNameZRC0021
heres a window/retard switch below click on link it looks like it has a set of rpm modules in it but they might not be the ones you want,if you buy this and need some i have the 3200-3800 and 5000-5600 rpm modules
http://cgi.ebay.com/ebaymotors/MSD-...yZ133192QQrdZ1QQssPageNameZWD6VQQcmdZViewItem
heres a good Wideband O2 Controller w/ Sensor and Display if thats what your wanting there expensive its a PLX M-300 which is a good brand if you just want the sensor run a search on plx wideband o2 sensors...
i cant find any good prices on a bottle heater cutoff switch and you can buy relays at a local autoparts store.
heres a fuel pressure cutoff switch.
http://motors.search.ebay.com/nitro...Z6000QQsamcmZ6000QQsaspiZ2QQssPageNameZRC0021
heres a window/retard switch below click on link it looks like it has a set of rpm modules in it but they might not be the ones you want,if you buy this and need some i have the 3200-3800 and 5000-5600 rpm modules
http://cgi.ebay.com/ebaymotors/MSD-...yZ133192QQrdZ1QQssPageNameZWD6VQQcmdZViewItem
heres a good Wideband O2 Controller w/ Sensor and Display if thats what your wanting there expensive its a PLX M-300 which is a good brand if you just want the sensor run a search on plx wideband o2 sensors...
blksn955.o
Founding Member
Before I had the tweecer I ran a MSD digital6+ it has a built in timing retard that when you "arm" the n2o with a 12v source to the msd box it will take out the timing you set it to remove. Pluss is a ign. box.
I also would get a window switch like you posted.
Most of the good bottle heaters will have a relay and a switch to keep the bottle at a temp and it will turn off with either temp or bottle pres.
I honestly have had more headache from a fuel pres. safty switch than help. I would rec. getting a inline or bigger intank pump to be safe and get a guage to see if your loosing FP at any time. You will be fine on up to 125 shot on the stock pump...you can add a bigger pump at a 125 if you like but anything larger and I would sug. getting a bigger pump.
remember colder plugs for anything over 100shot to be safe.
purge is kinda "show" if you ask me...I will take the slight hit on street tires to give them a chance to hook first...if your on a good DR or ET street/drag then get one though.
I also would get a window switch like you posted.
Most of the good bottle heaters will have a relay and a switch to keep the bottle at a temp and it will turn off with either temp or bottle pres.
I honestly have had more headache from a fuel pres. safty switch than help. I would rec. getting a inline or bigger intank pump to be safe and get a guage to see if your loosing FP at any time. You will be fine on up to 125 shot on the stock pump...you can add a bigger pump at a 125 if you like but anything larger and I would sug. getting a bigger pump.
remember colder plugs for anything over 100shot to be safe.
purge is kinda "show" if you ask me...I will take the slight hit on street tires to give them a chance to hook first...if your on a good DR or ET street/drag then get one though.
What about this box
http://store.summitracing.com/partd...4294925143+400249+4294925127+115&autoview=sku
and i have a bbk 255 lph fuel pump.
http://store.summitracing.com/partd...4294925143+400249+4294925127+115&autoview=sku
and i have a bbk 255 lph fuel pump.
bill302
Active Member
Similar threads
Progress Thread
mnky99 2001 V6 evap core, ac compressor, heater core replacement
