What things will i need to get whenever i go nitrous? Wet kit by the way.
So far i plan on getting
1A wideband any suggestions on which kind?
2nitrous pressure guage
3an ignition box w a window switch and timing retarder any suggestions on this too?
4bottle heater
Anything else needed?
heres a good Wideband O2 Controller w/ Sensor and Display if thats what your wanting there expensive its a PLX M-300 which is a good brand if you just want the sensor run a search on plx wideband o2 sensors...
Before I had the tweecer I ran a MSD digital6+ it has a built in timing retard that when you "arm" the n2o with a 12v source to the msd box it will take out the timing you set it to remove. Pluss is a ign. box.
I also would get a window switch like you posted.
Most of the good bottle heaters will have a relay and a switch to keep the bottle at a temp and it will turn off with either temp or bottle pres.
I honestly have had more headache from a fuel pres. safty switch than help. I would rec. getting a inline or bigger intank pump to be safe and get a guage to see if your loosing FP at any time. You will be fine on up to 125 shot on the stock pump...you can add a bigger pump at a 125 if you like but anything larger and I would sug. getting a bigger pump.
remember colder plugs for anything over 100shot to be safe.
purge is kinda "show" if you ask me...I will take the slight hit on street tires to give them a chance to hook first...if your on a good DR or ET street/drag then get one though.