non-boost comp FPR

[just4bob50]

Im having a hard time finding out which regulators have boost comp and which dont. My problem is that when my car was first tuned with the SCT chip I had a non-comp MAC knock off reg. on the car. Well it started to leak a little so I replaced it with an aeromotive reg. that has a 1:1 boost comp. Now my power from 5000 rpms on up is being killed because my AFR goes way past 10:1 buy 5200 rpms. My tuner said there is alot of power left in it but doesnt want to tune with the current reg. I have now. He said it actually works against the SCT programming. He said that with the 42lb. inj. and my 190 pump I have more than enough fuel without boosting the pressure. So without going back to a stock reg. who makes one without boost comp built in.

 

[Rick 91GT]

Bob you should be able to just disconnect the vac line...it registers off the boost it see's from the vac line. Set it with the vac off, and put a cap over the port.

You should be able to set it vac off and your tuner can do what ever he wants with the SCT tune.

I like the Kirban units if you want to buy another but you really do not have to if I am thinking correct.

 

[just4bob50]

I was looking at the kirban regulators on ebay. I think thats what Im going to get.

 

[getusummm]

My Kirban says it is boost referenced also.

 

[Beasly B]

The BBK regulator doesn't have the boost compensation, I just sent mine back in exchange for the mallory with the boost comp for my setup.