Painted the brakes red (PICS)

LaserSVT · Feb 29, 2008

So I finnaly painted my brakes red and I really like the look
Here are a couple pic and ya I know its a camera phone but its better than nuttin

Im also running 285s all the way around now
She grips the road like its glued there Tossing it through corners is a blast and the Nittos out back have killer gripp!

View attachment 328402
View attachment 328403
View attachment 328404

fobra559 · Feb 29, 2008

Nice man I plan on getting the front cobra brakes with red calipers and just paint the rear calipers to match.

'03GTinFLA · Mar 1, 2008

Nice. I just did that last weekend. Waiting to put them on soon. Actually in a few hours.

LaserSVT · Mar 1, 2008

Yeah that stuff went on pretty easily I was gonna pull them off and spray them but couldnt find the spray kit and just bought the brusk kit. Went on really easy and just taped off the "Cobra" and went back with a detail brush to get between the letters. I did four coats and the gloss is nice and cant see the brashmarks at all Left me with enough paint to do 3 more cars So who wants to come by and paint theirs?

BlackMach1ne · Mar 1, 2008

you shouldve left the circles unpainted

04sleeper · Mar 1, 2008

Looks good.

Bad92GT · Mar 1, 2008

looks good, everytime i buy nittos though they are slick as water, so i pretty much am against ever buying a set of nittos willfully

Mustang5L5 · Mar 1, 2008

BlackMach1ne said:
you shouldve left the circles unpainted

They come painted like that OEM from Ford on the 96-97 wheels.

I think they look better than the 94-95 versions

BTW, i run bullitts normally. I was just getting new tires put on and was just running my 5.0's wheels temporarily.

LaserSVT · Mar 1, 2008

BlackMach1ne said:
you shouldve left the circles unpainted

Yeah but I would of had to remove the pads cause I had to paint the inner part of the holes on the caliper and I couldnt do it without getting some paint on them.
Doesnt really matter since this summer I am putting on FMS x-drilled/slotted rotors and Russel braided lines. At that time I will put on EBC green pads and the holes will be black again

Just a work in progress and I have seen so many beautiful Stangs on here come from a pretty worn out ride and in a couple years I would feel good to have the people I like and respect on here say that about mine, ya know "wow the car has come along way and I have been watching all the progress on it here and it looks killer, good job"
Its small but makes me feel great. Im not in the best health and when I go out and get compliments on her I really feel better because I sprend all my free time on my Cobra. There is alot of blood, sweat and tears in this car and when shes done I want it to be one of thoes ooohhhhh I want your car so bad kinda Stangs

Long way to go, new paint, wheels, suspension, leather, top end rebuild and a Kenny Bell 2.1 supercharger (shootin for 425-450 rwhp) and I will be a happy camper.

Thanks for the compliments one and all

spederman · Mar 1, 2008

I need to repaint one of my calipers since some how the paint got fried on it. What kit did you use for the paint? I've seen the G2 caliper paint, but $40 seems like a lot for a caliper paint kit.

LaserSVT · Mar 1, 2008

I got the Dupont Duplicolor kit from Autozone for $16.

crzyhrse99 · Mar 1, 2008

Looks good I have been planning on painting mine whenever I get a free wknd. What kind of prep work did you do before painting? I know mine have some surface rust on them so they will have to be sanded, i'm looking at getting the dupont kit too.

ryan218 · Mar 1, 2008

Mustang5L5 said:
They come painted like that OEM from Ford on the 96-97 wheels.

I think they look better than the 94-95 versions

BTW, i run bullitts normally. I was just getting new tires put on and was just running my 5.0's wheels temporarily.

'
I LOVE them wheels

LaserSVT · Mar 1, 2008

crzyhrse99 said:
Looks good I have been planning on painting mine whenever I get a free wknd. What kind of prep work did you do before painting? I know mine have some surface rust on them so they will have to be sanded, i'm looking at getting the dupont kit too.

Suprisingly little prep work. If you have smmoth surface calipers you have to lightly sand them but since most of ours are pourus thats not neede. It comes with an aerosol can of cleaner and you just hose down all the calipers. I then taped off the Cobra letters with a solid strip of tape then went back after I was done painting and used the small brush from my touch up paint and painted betwee the letters. It has a pint of paint so there is plenty but the brush doesnt really last for more than two coats and it starts to leave hairs on the surface so I suggest getting an extra brush. All an all I would give it a 2 on the difficulty meter Twice today I heard someone point at the car and say look at thoes brakes, I assume it was cause they looked good. They coulda then said man that looks rice

BlackMach1ne · Mar 1, 2008

Mustang5L5 said:
They come painted like that OEM from Ford on the 96-97 wheels.

I think they look better than the 94-95 versions

BTW, i run bullitts normally. I was just getting new tires put on and was just running my 5.0's wheels temporarily.

Im talking about the calipers

BlackMach1ne · Mar 1, 2008

LaserSVT said:
Yeah but I would of had to remove the pads cause I had to paint the inner part of the holes on the caliper and I couldnt do it without getting some paint on them.

i painted my mach 1 calipers and just put scotch tape over the holes

spederman · Mar 1, 2008

What color were the calipers before you painted them red?

Mine are gloss black (i have the brembo Cobra R calipers) and wanted to change them to blue to match my car, but didnt know if blue would cover up the black good enuf to look sharp.

LaserSVT · Mar 1, 2008

spederman said:
What color were the calipers before you painted them red?

Mine are gloss black (i have the brembo Cobra R calipers) and wanted to change them to blue to match my car, but didnt know if blue would cover up the black good enuf to look sharp.

Mine were the factory charcole colord ones. Ill trade ya

Mustang5L5 · Mar 1, 2008

BlackMach1ne said:
Im talking about the calipers

Yeah i mis-understood. Sorry bout that

'03GTinFLA · Mar 2, 2008

I bought a used pair of plain silver Cobra brakes. Then I bought caliper spray paint and I had primer and clear coat already. I sanded, primer, red, painted letters white, then clear coat. I think it turned out well. Yes I could have just bought red cobra calipers but I got a good deal on the silver ones and I like to do stuff myself. It's a pretty easy job. I painted my GT calipers when they were on my car. I masked everything off with tape and tin foil and sprayed them while they were on my car.

Painted the brakes red (PICS)

Got FB banned again for saying nards

At least it's more erect and not floppy anymore.

Member

Got FB banned again for saying nards

New Member

The 5 Minute Plan Man

That is…until I whipped out my Bissell

Got FB banned again for saying nards

Member

Got FB banned again for saying nards

Active Member

In just 10 years, I'll be old enough to drive!!!!

Got FB banned again for saying nards

New Member

New Member

Member

Got FB banned again for saying nards

That is…until I whipped out my Bissell

Member

Similar threads

Privacy & Transparency

Privacy & Transparency